xref: /freebsd/sys/contrib/device-tree/Bindings/leds/leds-pm8058.txt (revision 7fdf597e96a02165cfe22ff357b857d5fa15ed8a)
1Qualcomm PM8058 LED driver
2
3The Qualcomm PM8058 is a multi-functional device which contains
4an LED driver block for up to six LEDs: three normal LEDs, two
5"flash" LEDs and one "keypad backlight" LED. The names are
6quoted because sometimes these LED drivers are used for wildly
7different things than flash or keypad backlight: their names
8are more of a suggestion than a hard-wired usecase.
9
10Hardware-wise the different LEDs support slightly different
11output currents. The "flash" LEDs do not need to charge nor
12do they support external triggers. They are just powerful LED
13drivers.
14
15The LEDs appear as children to the PM8058 device, with the
16proper compatible string. For the PM8058 bindings see:
17mfd/qcom-pm8xxx.txt.
18
19Each LED is represented as a sub-node of the syscon device. Each
20node's name represents the name of the corresponding LED.
21
22LED sub-node properties:
23
24Required properties:
25- compatible: one of
26  "qcom,pm8058-led" (for the normal LEDs at 0x131, 0x132 and 0x133)
27  "qcom,pm8058-keypad-led" (for the "keypad" LED at 0x48)
28  "qcom,pm8058-flash-led" (for the "flash" LEDs at 0x49 and 0xFB)
29
30Optional properties:
31- label: see Documentation/devicetree/bindings/leds/common.txt
32- default-state: see Documentation/devicetree/bindings/leds/common.txt
33- linux,default-trigger: see Documentation/devicetree/bindings/leds/common.txt
34
35Example:
36
37qcom,ssbi@500000 {
38	pmicintc: pmic@0 {
39		compatible = "qcom,pm8058";
40		led@48 {
41			compatible = "qcom,pm8058-keypad-led";
42			reg = <0x48>;
43			label = "pm8050:white:keypad";
44			default-state = "off";
45		};
46		led@131 {
47			compatible = "qcom,pm8058-led";
48			reg = <0x131>;
49			label = "pm8058:red";
50			default-state = "off";
51		};
52		led@132 {
53			compatible = "qcom,pm8058-led";
54			reg = <0x132>;
55			label = "pm8058:yellow";
56			default-state = "off";
57			linux,default-trigger = "mmc0";
58		};
59		led@133 {
60			compatible = "qcom,pm8058-led";
61			reg = <0x133>;
62			label = "pm8058:green";
63			default-state = "on";
64			linux,default-trigger = "heartbeat";
65		};
66	};
67};
68