1# SPDX-License-Identifier: GPL-2.0-only 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/leds/common.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: Common leds properties 8 9maintainers: 10 - Jacek Anaszewski <jacek.anaszewski@gmail.com> 11 - Pavel Machek <pavel@ucw.cz> 12 13description: 14 LED and flash LED devices provide the same basic functionality as current 15 regulators, but extended with LED and flash LED specific features like 16 blinking patterns, flash timeout, flash faults and external flash strobe mode. 17 18 Many LED devices expose more than one current output that can be connected 19 to one or more discrete LED component. Since the arrangement of connections 20 can influence the way of the LED device initialization, the LED components 21 have to be tightly coupled with the LED device binding. They are represented 22 by child nodes of the parent LED device binding. 23 24properties: 25 led-sources: 26 description: 27 List of device current outputs the LED is connected to. The outputs are 28 identified by the numbers that must be defined in the LED device binding 29 documentation. 30 $ref: /schemas/types.yaml#definitions/uint32-array 31 32 function: 33 description: 34 LED function. Use one of the LED_FUNCTION_* prefixed definitions 35 from the header include/dt-bindings/leds/common.h. If there is no 36 matching LED_FUNCTION available, add a new one. 37 $ref: /schemas/types.yaml#definitions/string 38 39 color: 40 description: 41 Color of the LED. Use one of the LED_COLOR_ID_* prefixed definitions from 42 the header include/dt-bindings/leds/common.h. If there is no matching 43 LED_COLOR_ID available, add a new one. 44 $ref: /schemas/types.yaml#definitions/uint32 45 minimum: 0 46 maximum: 9 47 48 function-enumerator: 49 description: 50 Integer to be used when more than one instance of the same function is 51 needed, differing only with an ordinal number. 52 $ref: /schemas/types.yaml#definitions/uint32 53 54 label: 55 description: 56 The label for this LED. If omitted, the label is taken from the node name 57 (excluding the unit address). It has to uniquely identify a device, i.e. 58 no other LED class device can be assigned the same label. This property is 59 deprecated - use 'function' and 'color' properties instead. 60 function-enumerator has no effect when this property is present. 61 62 default-state: 63 description: 64 The initial state of the LED. If the LED is already on or off and the 65 default-state property is set the to same value, then no glitch should be 66 produced where the LED momentarily turns off (or on). The "keep" setting 67 will keep the LED at whatever its current state is, without producing a 68 glitch. 69 $ref: /schemas/types.yaml#definitions/string 70 enum: 71 - on 72 - off 73 - keep 74 default: off 75 76 linux,default-trigger: 77 description: 78 This parameter, if present, is a string defining the trigger assigned to 79 the LED. 80 $ref: /schemas/types.yaml#definitions/string 81 82 enum: 83 # LED will act as a back-light, controlled by the framebuffer system 84 - backlight 85 # LED will turn on (but for leds-gpio see "default-state" property in 86 # Documentation/devicetree/bindings/leds/leds-gpio.yaml) 87 - default-on 88 # LED "double" flashes at a load average based rate 89 - heartbeat 90 # LED indicates disk activity 91 - disk-activity 92 # LED indicates IDE disk activity (deprecated), in new implementations 93 # use "disk-activity" 94 - ide-disk 95 # LED flashes at a fixed, configurable rate 96 - timer 97 # LED alters the brightness for the specified duration with one software 98 # timer (requires "led-pattern" property) 99 - pattern 100 101 led-pattern: 102 description: | 103 Array of integers with default pattern for certain triggers. 104 105 Each trigger may parse this property differently: 106 - one-shot : two numbers specifying delay on and delay off (in ms), 107 - timer : two numbers specifying delay on and delay off (in ms), 108 - pattern : the pattern is given by a series of tuples, of 109 brightness and duration (in ms). The exact format is 110 described in: 111 Documentation/devicetree/bindings/leds/leds-trigger-pattern.txt 112 $ref: /schemas/types.yaml#definitions/uint32-matrix 113 items: 114 minItems: 2 115 maxItems: 2 116 117 led-max-microamp: 118 description: 119 Maximum LED supply current in microamperes. This property can be made 120 mandatory for the board configurations introducing a risk of hardware 121 damage in case an excessive current is set. 122 For flash LED controllers with configurable current this property is 123 mandatory for the LEDs in the non-flash modes (e.g. torch or indicator). 124 125 panic-indicator: 126 description: 127 This property specifies that the LED should be used, if at all possible, 128 as a panic indicator. 129 type: boolean 130 131 trigger-sources: 132 description: | 133 List of devices which should be used as a source triggering this LED 134 activity. Some LEDs can be related to a specific device and should somehow 135 indicate its state. E.g. USB 2.0 LED may react to device(s) in a USB 2.0 136 port(s). 137 Another common example is switch or router with multiple Ethernet ports 138 each of them having its own LED assigned (assuming they are not 139 hardwired). In such cases this property should contain phandle(s) of 140 related source device(s). 141 In many cases LED can be related to more than one device (e.g. one USB LED 142 vs. multiple USB ports). Each source should be represented by a node in 143 the device tree and be referenced by a phandle and a set of phandle 144 arguments. A length of arguments should be specified by the 145 #trigger-source-cells property in the source node. 146 $ref: /schemas/types.yaml#definitions/phandle-array 147 148 # Required properties for flash LED child nodes: 149 flash-max-microamp: 150 description: 151 Maximum flash LED supply current in microamperes. Required for flash LED 152 nodes with configurable current. 153 154 flash-max-timeout-us: 155 description: 156 Maximum timeout in microseconds after which the flash LED is turned off. 157 Required for flash LED nodes with configurable timeout. 158 159additionalProperties: true 160 161examples: 162 - | 163 #include <dt-bindings/gpio/gpio.h> 164 #include <dt-bindings/leds/common.h> 165 166 led-controller { 167 compatible = "gpio-leds"; 168 169 led-0 { 170 function = LED_FUNCTION_STATUS; 171 linux,default-trigger = "heartbeat"; 172 gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>; 173 }; 174 175 led-1 { 176 function = LED_FUNCTION_USB; 177 gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; 178 trigger-sources = <&ohci_port1>, <&ehci_port1>; 179 }; 180 }; 181 182 led-controller@0 { 183 compatible = "maxim,max77693-led"; 184 reg = <0 0x100>; 185 186 led { 187 function = LED_FUNCTION_FLASH; 188 color = <LED_COLOR_ID_WHITE>; 189 led-sources = <0>, <1>; 190 led-max-microamp = <50000>; 191 flash-max-microamp = <320000>; 192 flash-max-timeout-us = <500000>; 193 }; 194 }; 195 196 i2c { 197 #address-cells = <1>; 198 #size-cells = <0>; 199 200 led-controller@30 { 201 compatible = "panasonic,an30259a"; 202 reg = <0x30>; 203 #address-cells = <1>; 204 #size-cells = <0>; 205 206 led@1 { 207 reg = <1>; 208 linux,default-trigger = "heartbeat"; 209 function = LED_FUNCTION_INDICATOR; 210 function-enumerator = <1>; 211 }; 212 213 led@2 { 214 reg = <2>; 215 function = LED_FUNCTION_INDICATOR; 216 function-enumerator = <2>; 217 }; 218 219 led@3 { 220 reg = <3>; 221 function = LED_FUNCTION_INDICATOR; 222 function-enumerator = <3>; 223 }; 224 }; 225 }; 226 227... 228