xref: /freebsd/sys/contrib/device-tree/Bindings/iommu/arm,smmu.yaml (revision fe75646a0234a261c0013bf1840fdac4acaf0cec)
1# SPDX-License-Identifier: GPL-2.0-only
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/iommu/arm,smmu.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: ARM System MMU Architecture Implementation
8
9maintainers:
10  - Will Deacon <will@kernel.org>
11  - Robin Murphy <Robin.Murphy@arm.com>
12
13description: |+
14  ARM SoCs may contain an implementation of the ARM System Memory
15  Management Unit Architecture, which can be used to provide 1 or 2 stages
16  of address translation to bus masters external to the CPU.
17
18  The SMMU may also raise interrupts in response to various fault
19  conditions.
20
21properties:
22  $nodename:
23    pattern: "^iommu@[0-9a-f]*"
24  compatible:
25    oneOf:
26      - description: Qcom SoCs implementing "arm,smmu-v2"
27        items:
28          - enum:
29              - qcom,msm8996-smmu-v2
30              - qcom,msm8998-smmu-v2
31              - qcom,sdm630-smmu-v2
32          - const: qcom,smmu-v2
33
34      - description: Qcom SoCs implementing "qcom,smmu-500" and "arm,mmu-500"
35        items:
36          - enum:
37              - qcom,qcm2290-smmu-500
38              - qcom,qdu1000-smmu-500
39              - qcom,sa8775p-smmu-500
40              - qcom,sc7180-smmu-500
41              - qcom,sc7280-smmu-500
42              - qcom,sc8180x-smmu-500
43              - qcom,sc8280xp-smmu-500
44              - qcom,sdm670-smmu-500
45              - qcom,sdm845-smmu-500
46              - qcom,sdx55-smmu-500
47              - qcom,sdx65-smmu-500
48              - qcom,sm6115-smmu-500
49              - qcom,sm6125-smmu-500
50              - qcom,sm6350-smmu-500
51              - qcom,sm6375-smmu-500
52              - qcom,sm8150-smmu-500
53              - qcom,sm8250-smmu-500
54              - qcom,sm8350-smmu-500
55              - qcom,sm8450-smmu-500
56              - qcom,sm8550-smmu-500
57          - const: qcom,smmu-500
58          - const: arm,mmu-500
59
60      - description: Qcom SoCs implementing "arm,mmu-500" (legacy binding)
61        deprecated: true
62        items:
63          # Do not add additional SoC to this list. Instead use two previous lists.
64          - enum:
65              - qcom,qcm2290-smmu-500
66              - qcom,sc7180-smmu-500
67              - qcom,sc7280-smmu-500
68              - qcom,sc8180x-smmu-500
69              - qcom,sc8280xp-smmu-500
70              - qcom,sdm845-smmu-500
71              - qcom,sm6115-smmu-500
72              - qcom,sm6350-smmu-500
73              - qcom,sm6375-smmu-500
74              - qcom,sm8150-smmu-500
75              - qcom,sm8250-smmu-500
76              - qcom,sm8350-smmu-500
77              - qcom,sm8450-smmu-500
78          - const: arm,mmu-500
79      - description: Qcom Adreno GPUs implementing "qcom,smmu-500" and "arm,mmu-500"
80        items:
81          - enum:
82              - qcom,sc7280-smmu-500
83              - qcom,sm6115-smmu-500
84              - qcom,sm6125-smmu-500
85              - qcom,sm8150-smmu-500
86              - qcom,sm8250-smmu-500
87              - qcom,sm8350-smmu-500
88          - const: qcom,adreno-smmu
89          - const: qcom,smmu-500
90          - const: arm,mmu-500
91      - description: Qcom Adreno GPUs implementing "arm,mmu-500" (legacy binding)
92        deprecated: true
93        items:
94          # Do not add additional SoC to this list. Instead use previous list.
95          - enum:
96              - qcom,sc7280-smmu-500
97              - qcom,sm8150-smmu-500
98              - qcom,sm8250-smmu-500
99          - const: qcom,adreno-smmu
100          - const: arm,mmu-500
101      - description: Qcom Adreno GPUs implementing "arm,smmu-v2"
102        items:
103          - enum:
104              - qcom,msm8996-smmu-v2
105              - qcom,sc7180-smmu-v2
106              - qcom,sdm630-smmu-v2
107              - qcom,sdm845-smmu-v2
108              - qcom,sm6350-smmu-v2
109          - const: qcom,adreno-smmu
110          - const: qcom,smmu-v2
111      - description: Qcom Adreno GPUs on Google Cheza platform
112        items:
113          - const: qcom,sdm845-smmu-v2
114          - const: qcom,smmu-v2
115      - description: Marvell SoCs implementing "arm,mmu-500"
116        items:
117          - const: marvell,ap806-smmu-500
118          - const: arm,mmu-500
119      - description: NVIDIA SoCs that require memory controller interaction
120          and may program multiple ARM MMU-500s identically with the memory
121          controller interleaving translations between multiple instances
122          for improved performance.
123        items:
124          - enum:
125              - nvidia,tegra186-smmu
126              - nvidia,tegra194-smmu
127              - nvidia,tegra234-smmu
128          - const: nvidia,smmu-500
129      - items:
130          - const: arm,mmu-500
131          - const: arm,smmu-v2
132      - items:
133          - enum:
134              - arm,mmu-400
135              - arm,mmu-401
136          - const: arm,smmu-v1
137      - enum:
138          - arm,smmu-v1
139          - arm,smmu-v2
140          - arm,mmu-400
141          - arm,mmu-401
142          - arm,mmu-500
143          - cavium,smmu-v2
144
145  reg:
146    minItems: 1
147    maxItems: 2
148
149  '#global-interrupts':
150    description: The number of global interrupts exposed by the device.
151    $ref: /schemas/types.yaml#/definitions/uint32
152    minimum: 0
153    maximum: 260   # 2 secure, 2 non-secure, and up to 256 perf counters
154
155  '#iommu-cells':
156    enum: [ 1, 2 ]
157    description: |
158      See Documentation/devicetree/bindings/iommu/iommu.txt for details. With a
159      value of 1, each IOMMU specifier represents a distinct stream ID emitted
160      by that device into the relevant SMMU.
161
162      SMMUs with stream matching support and complex masters may use a value of
163      2, where the second cell of the IOMMU specifier represents an SMR mask to
164      combine with the ID in the first cell.  Care must be taken to ensure the
165      set of matched IDs does not result in conflicts.
166
167  interrupts:
168    minItems: 1
169    maxItems: 388   # 260 plus 128 contexts
170    description: |
171      Interrupt list, with the first #global-interrupts entries corresponding to
172      the global interrupts and any following entries corresponding to context
173      interrupts, specified in order of their indexing by the SMMU.
174
175      For SMMUv2 implementations, there must be exactly one interrupt per
176      context bank. In the case of a single, combined interrupt, it must be
177      listed multiple times.
178
179  dma-coherent:
180    description: |
181      Present if page table walks made by the SMMU are cache coherent with the
182      CPU.
183
184      NOTE: this only applies to the SMMU itself, not masters connected
185      upstream of the SMMU.
186
187  calxeda,smmu-secure-config-access:
188    type: boolean
189    description:
190      Enable proper handling of buggy implementations that always use secure
191      access to SMMU configuration registers. In this case non-secure aliases of
192      secure registers have to be used during SMMU configuration.
193
194  stream-match-mask:
195    $ref: /schemas/types.yaml#/definitions/uint32
196    description: |
197      For SMMUs supporting stream matching and using #iommu-cells = <1>,
198      specifies a mask of bits to ignore when matching stream IDs (e.g. this may
199      be programmed into the SMRn.MASK field of every stream match register
200      used). For cases where it is desirable to ignore some portion of every
201      Stream ID (e.g. for certain MMU-500 configurations given globally unique
202      input IDs). This property is not valid for SMMUs using stream indexing, or
203      using stream matching with #iommu-cells = <2>, and may be ignored if
204      present in such cases.
205
206  clock-names:
207    minItems: 1
208    maxItems: 7
209
210  clocks:
211    minItems: 1
212    maxItems: 7
213
214  power-domains:
215    minItems: 1
216    maxItems: 3
217
218  nvidia,memory-controller:
219    description: |
220      A phandle to the memory controller on NVIDIA Tegra186 and later SoCs.
221      The memory controller needs to be programmed with a mapping of memory
222      client IDs to ARM SMMU stream IDs.
223
224      If this property is absent, the mapping programmed by early firmware
225      will be used and it is not guaranteed that IOMMU translations will be
226      enabled for any given device.
227    $ref: /schemas/types.yaml#/definitions/phandle
228
229required:
230  - compatible
231  - reg
232  - '#global-interrupts'
233  - '#iommu-cells'
234  - interrupts
235
236additionalProperties: false
237
238allOf:
239  - if:
240      properties:
241        compatible:
242          contains:
243            enum:
244              - nvidia,tegra186-smmu
245              - nvidia,tegra194-smmu
246              - nvidia,tegra234-smmu
247    then:
248      properties:
249        reg:
250          minItems: 1
251          maxItems: 2
252
253      # The reference to the memory controller is required to ensure that the
254      # memory client to stream ID mapping can be done synchronously with the
255      # IOMMU attachment.
256      required:
257        - nvidia,memory-controller
258    else:
259      properties:
260        reg:
261          maxItems: 1
262
263  - if:
264      properties:
265        compatible:
266          contains:
267            enum:
268              - qcom,msm8998-smmu-v2
269              - qcom,sdm630-smmu-v2
270    then:
271      anyOf:
272        - properties:
273            clock-names:
274              items:
275                - const: bus
276            clocks:
277              items:
278                - description: bus clock required for downstream bus access and for
279                    the smmu ptw
280        - properties:
281            clock-names:
282              items:
283                - const: iface
284                - const: mem
285                - const: mem_iface
286            clocks:
287              items:
288                - description: interface clock required to access smmu's registers
289                    through the TCU's programming interface.
290                - description: bus clock required for memory access
291                - description: bus clock required for GPU memory access
292        - properties:
293            clock-names:
294              items:
295                - const: iface-mm
296                - const: iface-smmu
297                - const: bus-mm
298                - const: bus-smmu
299            clocks:
300              items:
301                - description: interface clock required to access mnoc's registers
302                    through the TCU's programming interface.
303                - description: interface clock required to access smmu's registers
304                    through the TCU's programming interface.
305                - description: bus clock required for downstream bus access
306                - description: bus clock required for the smmu ptw
307
308  - if:
309      properties:
310        compatible:
311          contains:
312            enum:
313              - qcom,msm8996-smmu-v2
314              - qcom,sc7180-smmu-v2
315              - qcom,sdm845-smmu-v2
316    then:
317      properties:
318        clock-names:
319          items:
320            - const: bus
321            - const: iface
322
323        clocks:
324          items:
325            - description: bus clock required for downstream bus access and for
326                the smmu ptw
327            - description: interface clock required to access smmu's registers
328                through the TCU's programming interface.
329
330  - if:
331      properties:
332        compatible:
333          contains:
334            const: qcom,sc7280-smmu-500
335    then:
336      properties:
337        clock-names:
338          items:
339            - const: gcc_gpu_memnoc_gfx_clk
340            - const: gcc_gpu_snoc_dvm_gfx_clk
341            - const: gpu_cc_ahb_clk
342            - const: gpu_cc_hlos1_vote_gpu_smmu_clk
343            - const: gpu_cc_cx_gmu_clk
344            - const: gpu_cc_hub_cx_int_clk
345            - const: gpu_cc_hub_aon_clk
346
347        clocks:
348          items:
349            - description: GPU memnoc_gfx clock
350            - description: GPU snoc_dvm_gfx clock
351            - description: GPU ahb clock
352            - description: GPU hlos1_vote_GPU smmu clock
353            - description: GPU cx_gmu clock
354            - description: GPU hub_cx_int clock
355            - description: GPU hub_aon clock
356
357  - if:
358      properties:
359        compatible:
360          contains:
361            enum:
362              - qcom,sm6350-smmu-v2
363              - qcom,sm8150-smmu-500
364              - qcom,sm8250-smmu-500
365    then:
366      properties:
367        clock-names:
368          items:
369            - const: ahb
370            - const: bus
371            - const: iface
372
373        clocks:
374          items:
375            - description: bus clock required for AHB bus access
376            - description: bus clock required for downstream bus access and for
377                the smmu ptw
378            - description: interface clock required to access smmu's registers
379                through the TCU's programming interface.
380
381  - if:
382      properties:
383        compatible:
384          items:
385            - enum:
386                - qcom,sm6115-smmu-500
387                - qcom,sm6125-smmu-500
388            - const: qcom,adreno-smmu
389            - const: qcom,smmu-500
390            - const: arm,mmu-500
391    then:
392      properties:
393        clock-names:
394          items:
395            - const: mem
396            - const: hlos
397            - const: iface
398
399        clocks:
400          items:
401            - description: GPU memory bus clock
402            - description: Voter clock required for HLOS SMMU access
403            - description: Interface clock required for register access
404
405  # Disallow clocks for all other platforms with specific compatibles
406  - if:
407      properties:
408        compatible:
409          contains:
410            enum:
411              - cavium,smmu-v2
412              - marvell,ap806-smmu-500
413              - nvidia,smmu-500
414              - qcom,qcm2290-smmu-500
415              - qcom,qdu1000-smmu-500
416              - qcom,sa8775p-smmu-500
417              - qcom,sc7180-smmu-500
418              - qcom,sc8180x-smmu-500
419              - qcom,sc8280xp-smmu-500
420              - qcom,sdm670-smmu-500
421              - qcom,sdm845-smmu-500
422              - qcom,sdx55-smmu-500
423              - qcom,sdx65-smmu-500
424              - qcom,sm6350-smmu-500
425              - qcom,sm6375-smmu-500
426              - qcom,sm8350-smmu-500
427              - qcom,sm8450-smmu-500
428              - qcom,sm8550-smmu-500
429    then:
430      properties:
431        clock-names: false
432        clocks: false
433
434  - if:
435      properties:
436        compatible:
437          contains:
438            const: qcom,sm6375-smmu-500
439    then:
440      properties:
441        power-domains:
442          items:
443            - description: SNoC MMU TBU RT GDSC
444            - description: SNoC MMU TBU NRT GDSC
445            - description: SNoC TURING MMU TBU0 GDSC
446
447      required:
448        - power-domains
449    else:
450      properties:
451        power-domains:
452          maxItems: 1
453
454examples:
455  - |+
456    /* SMMU with stream matching or stream indexing */
457    smmu1: iommu@ba5e0000 {
458            compatible = "arm,smmu-v1";
459            reg = <0xba5e0000 0x10000>;
460            #global-interrupts = <2>;
461            interrupts = <0 32 4>,
462                         <0 33 4>,
463                         <0 34 4>, /* This is the first context interrupt */
464                         <0 35 4>,
465                         <0 36 4>,
466                         <0 37 4>;
467            #iommu-cells = <1>;
468    };
469
470    /* device with two stream IDs, 0 and 7 */
471    master1 {
472            iommus = <&smmu1 0>,
473                     <&smmu1 7>;
474    };
475
476
477    /* SMMU with stream matching */
478    smmu2: iommu@ba5f0000 {
479            compatible = "arm,smmu-v1";
480            reg = <0xba5f0000 0x10000>;
481            #global-interrupts = <2>;
482            interrupts = <0 38 4>,
483                         <0 39 4>,
484                         <0 40 4>, /* This is the first context interrupt */
485                         <0 41 4>,
486                         <0 42 4>,
487                         <0 43 4>;
488            #iommu-cells = <2>;
489    };
490
491    /* device with stream IDs 0 and 7 */
492    master2 {
493            iommus = <&smmu2 0 0>,
494                     <&smmu2 7 0>;
495    };
496
497    /* device with stream IDs 1, 17, 33 and 49 */
498    master3 {
499            iommus = <&smmu2 1 0x30>;
500    };
501
502
503    /* ARM MMU-500 with 10-bit stream ID input configuration */
504    smmu3: iommu@ba600000 {
505            compatible = "arm,mmu-500", "arm,smmu-v2";
506            reg = <0xba600000 0x10000>;
507            #global-interrupts = <2>;
508            interrupts = <0 44 4>,
509                         <0 45 4>,
510                         <0 46 4>, /* This is the first context interrupt */
511                         <0 47 4>,
512                         <0 48 4>,
513                         <0 49 4>;
514            #iommu-cells = <1>;
515            /* always ignore appended 5-bit TBU number */
516            stream-match-mask = <0x7c00>;
517    };
518
519    bus {
520            /* bus whose child devices emit one unique 10-bit stream
521               ID each, but may master through multiple SMMU TBUs */
522            iommu-map = <0 &smmu3 0 0x400>;
523
524
525    };
526
527  - |+
528    /* Qcom's arm,smmu-v2 implementation */
529    #include <dt-bindings/interrupt-controller/arm-gic.h>
530    #include <dt-bindings/interrupt-controller/irq.h>
531    smmu4: iommu@d00000 {
532      compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
533      reg = <0xd00000 0x10000>;
534
535      #global-interrupts = <1>;
536      interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
537             <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
538             <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
539      #iommu-cells = <1>;
540      power-domains = <&mmcc 0>;
541
542      clocks = <&mmcc 123>,
543        <&mmcc 124>;
544      clock-names = "bus", "iface";
545    };
546