xref: /freebsd/sys/contrib/device-tree/Bindings/iommu/arm,smmu.yaml (revision cb14a3fe5122c879eae1fb480ed7ce82a699ddb6)
1# SPDX-License-Identifier: GPL-2.0-only
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/iommu/arm,smmu.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: ARM System MMU Architecture Implementation
8
9maintainers:
10  - Will Deacon <will@kernel.org>
11  - Robin Murphy <Robin.Murphy@arm.com>
12
13description: |+
14  ARM SoCs may contain an implementation of the ARM System Memory
15  Management Unit Architecture, which can be used to provide 1 or 2 stages
16  of address translation to bus masters external to the CPU.
17
18  The SMMU may also raise interrupts in response to various fault
19  conditions.
20
21properties:
22  $nodename:
23    pattern: "^iommu@[0-9a-f]*"
24  compatible:
25    oneOf:
26      - description: Qcom SoCs implementing "arm,smmu-v2"
27        items:
28          - enum:
29              - qcom,msm8996-smmu-v2
30              - qcom,msm8998-smmu-v2
31              - qcom,sdm630-smmu-v2
32              - qcom,sm6375-smmu-v2
33          - const: qcom,smmu-v2
34
35      - description: Qcom SoCs implementing "qcom,smmu-500" and "arm,mmu-500"
36        items:
37          - enum:
38              - qcom,qcm2290-smmu-500
39              - qcom,qdu1000-smmu-500
40              - qcom,sa8775p-smmu-500
41              - qcom,sc7180-smmu-500
42              - qcom,sc7280-smmu-500
43              - qcom,sc8180x-smmu-500
44              - qcom,sc8280xp-smmu-500
45              - qcom,sdm670-smmu-500
46              - qcom,sdm845-smmu-500
47              - qcom,sdx55-smmu-500
48              - qcom,sdx65-smmu-500
49              - qcom,sdx75-smmu-500
50              - qcom,sm6115-smmu-500
51              - qcom,sm6125-smmu-500
52              - qcom,sm6350-smmu-500
53              - qcom,sm6375-smmu-500
54              - qcom,sm8150-smmu-500
55              - qcom,sm8250-smmu-500
56              - qcom,sm8350-smmu-500
57              - qcom,sm8450-smmu-500
58              - qcom,sm8550-smmu-500
59          - const: qcom,smmu-500
60          - const: arm,mmu-500
61
62      - description: Qcom SoCs implementing "arm,mmu-500" (legacy binding)
63        deprecated: true
64        items:
65          # Do not add additional SoC to this list. Instead use two previous lists.
66          - enum:
67              - qcom,qcm2290-smmu-500
68              - qcom,sc7180-smmu-500
69              - qcom,sc7280-smmu-500
70              - qcom,sc8180x-smmu-500
71              - qcom,sc8280xp-smmu-500
72              - qcom,sdm845-smmu-500
73              - qcom,sm6115-smmu-500
74              - qcom,sm6350-smmu-500
75              - qcom,sm6375-smmu-500
76              - qcom,sm8150-smmu-500
77              - qcom,sm8250-smmu-500
78              - qcom,sm8350-smmu-500
79              - qcom,sm8450-smmu-500
80          - const: arm,mmu-500
81      - description: Qcom Adreno GPUs implementing "qcom,smmu-500" and "arm,mmu-500"
82        items:
83          - enum:
84              - qcom,sa8775p-smmu-500
85              - qcom,sc7280-smmu-500
86              - qcom,sc8280xp-smmu-500
87              - qcom,sm6115-smmu-500
88              - qcom,sm6125-smmu-500
89              - qcom,sm8150-smmu-500
90              - qcom,sm8250-smmu-500
91              - qcom,sm8350-smmu-500
92          - const: qcom,adreno-smmu
93          - const: qcom,smmu-500
94          - const: arm,mmu-500
95      - description: Qcom Adreno GPUs implementing "arm,mmu-500" (legacy binding)
96        deprecated: true
97        items:
98          # Do not add additional SoC to this list. Instead use previous list.
99          - enum:
100              - qcom,sc7280-smmu-500
101              - qcom,sm8150-smmu-500
102              - qcom,sm8250-smmu-500
103          - const: qcom,adreno-smmu
104          - const: arm,mmu-500
105      - description: Qcom Adreno GPUs implementing "arm,smmu-v2"
106        items:
107          - enum:
108              - qcom,msm8996-smmu-v2
109              - qcom,sc7180-smmu-v2
110              - qcom,sdm630-smmu-v2
111              - qcom,sdm845-smmu-v2
112              - qcom,sm6350-smmu-v2
113          - const: qcom,adreno-smmu
114          - const: qcom,smmu-v2
115      - description: Qcom Adreno GPUs on Google Cheza platform
116        items:
117          - const: qcom,sdm845-smmu-v2
118          - const: qcom,smmu-v2
119      - description: Marvell SoCs implementing "arm,mmu-500"
120        items:
121          - const: marvell,ap806-smmu-500
122          - const: arm,mmu-500
123      - description: NVIDIA SoCs that require memory controller interaction
124          and may program multiple ARM MMU-500s identically with the memory
125          controller interleaving translations between multiple instances
126          for improved performance.
127        items:
128          - enum:
129              - nvidia,tegra186-smmu
130              - nvidia,tegra194-smmu
131              - nvidia,tegra234-smmu
132          - const: nvidia,smmu-500
133      - items:
134          - const: arm,mmu-500
135          - const: arm,smmu-v2
136      - items:
137          - enum:
138              - arm,mmu-400
139              - arm,mmu-401
140          - const: arm,smmu-v1
141      - enum:
142          - arm,smmu-v1
143          - arm,smmu-v2
144          - arm,mmu-400
145          - arm,mmu-401
146          - arm,mmu-500
147          - cavium,smmu-v2
148
149  reg:
150    minItems: 1
151    maxItems: 2
152
153  '#global-interrupts':
154    description: The number of global interrupts exposed by the device.
155    $ref: /schemas/types.yaml#/definitions/uint32
156    minimum: 0
157    maximum: 260   # 2 secure, 2 non-secure, and up to 256 perf counters
158
159  '#iommu-cells':
160    enum: [ 1, 2 ]
161    description: |
162      See Documentation/devicetree/bindings/iommu/iommu.txt for details. With a
163      value of 1, each IOMMU specifier represents a distinct stream ID emitted
164      by that device into the relevant SMMU.
165
166      SMMUs with stream matching support and complex masters may use a value of
167      2, where the second cell of the IOMMU specifier represents an SMR mask to
168      combine with the ID in the first cell.  Care must be taken to ensure the
169      set of matched IDs does not result in conflicts.
170
171  interrupts:
172    minItems: 1
173    maxItems: 388   # 260 plus 128 contexts
174    description: |
175      Interrupt list, with the first #global-interrupts entries corresponding to
176      the global interrupts and any following entries corresponding to context
177      interrupts, specified in order of their indexing by the SMMU.
178
179      For SMMUv2 implementations, there must be exactly one interrupt per
180      context bank. In the case of a single, combined interrupt, it must be
181      listed multiple times.
182
183  dma-coherent:
184    description: |
185      Present if page table walks made by the SMMU are cache coherent with the
186      CPU.
187
188      NOTE: this only applies to the SMMU itself, not masters connected
189      upstream of the SMMU.
190
191  calxeda,smmu-secure-config-access:
192    type: boolean
193    description:
194      Enable proper handling of buggy implementations that always use secure
195      access to SMMU configuration registers. In this case non-secure aliases of
196      secure registers have to be used during SMMU configuration.
197
198  stream-match-mask:
199    $ref: /schemas/types.yaml#/definitions/uint32
200    description: |
201      For SMMUs supporting stream matching and using #iommu-cells = <1>,
202      specifies a mask of bits to ignore when matching stream IDs (e.g. this may
203      be programmed into the SMRn.MASK field of every stream match register
204      used). For cases where it is desirable to ignore some portion of every
205      Stream ID (e.g. for certain MMU-500 configurations given globally unique
206      input IDs). This property is not valid for SMMUs using stream indexing, or
207      using stream matching with #iommu-cells = <2>, and may be ignored if
208      present in such cases.
209
210  clock-names:
211    minItems: 1
212    maxItems: 7
213
214  clocks:
215    minItems: 1
216    maxItems: 7
217
218  power-domains:
219    minItems: 1
220    maxItems: 3
221
222  nvidia,memory-controller:
223    description: |
224      A phandle to the memory controller on NVIDIA Tegra186 and later SoCs.
225      The memory controller needs to be programmed with a mapping of memory
226      client IDs to ARM SMMU stream IDs.
227
228      If this property is absent, the mapping programmed by early firmware
229      will be used and it is not guaranteed that IOMMU translations will be
230      enabled for any given device.
231    $ref: /schemas/types.yaml#/definitions/phandle
232
233required:
234  - compatible
235  - reg
236  - '#global-interrupts'
237  - '#iommu-cells'
238  - interrupts
239
240additionalProperties: false
241
242allOf:
243  - if:
244      properties:
245        compatible:
246          contains:
247            enum:
248              - nvidia,tegra186-smmu
249              - nvidia,tegra194-smmu
250              - nvidia,tegra234-smmu
251    then:
252      properties:
253        reg:
254          minItems: 1
255          maxItems: 2
256
257      # The reference to the memory controller is required to ensure that the
258      # memory client to stream ID mapping can be done synchronously with the
259      # IOMMU attachment.
260      required:
261        - nvidia,memory-controller
262    else:
263      properties:
264        reg:
265          maxItems: 1
266
267  - if:
268      properties:
269        compatible:
270          contains:
271            enum:
272              - qcom,msm8998-smmu-v2
273              - qcom,sdm630-smmu-v2
274              - qcom,sm6375-smmu-v2
275    then:
276      anyOf:
277        - properties:
278            clock-names:
279              items:
280                - const: bus
281            clocks:
282              items:
283                - description: bus clock required for downstream bus access and for
284                    the smmu ptw
285        - properties:
286            clock-names:
287              items:
288                - const: iface
289                - const: mem
290                - const: mem_iface
291            clocks:
292              items:
293                - description: interface clock required to access smmu's registers
294                    through the TCU's programming interface.
295                - description: bus clock required for memory access
296                - description: bus clock required for GPU memory access
297        - properties:
298            clock-names:
299              items:
300                - const: iface-mm
301                - const: iface-smmu
302                - const: bus-mm
303                - const: bus-smmu
304            clocks:
305              items:
306                - description: interface clock required to access mnoc's registers
307                    through the TCU's programming interface.
308                - description: interface clock required to access smmu's registers
309                    through the TCU's programming interface.
310                - description: bus clock required for downstream bus access
311                - description: bus clock required for the smmu ptw
312
313  - if:
314      properties:
315        compatible:
316          contains:
317            enum:
318              - qcom,msm8996-smmu-v2
319              - qcom,sc7180-smmu-v2
320              - qcom,sdm845-smmu-v2
321    then:
322      properties:
323        clock-names:
324          items:
325            - const: bus
326            - const: iface
327
328        clocks:
329          items:
330            - description: bus clock required for downstream bus access and for
331                the smmu ptw
332            - description: interface clock required to access smmu's registers
333                through the TCU's programming interface.
334
335  - if:
336      properties:
337        compatible:
338          contains:
339            enum:
340              - qcom,sa8775p-smmu-500
341              - qcom,sc7280-smmu-500
342              - qcom,sc8280xp-smmu-500
343    then:
344      properties:
345        clock-names:
346          items:
347            - const: gcc_gpu_memnoc_gfx_clk
348            - const: gcc_gpu_snoc_dvm_gfx_clk
349            - const: gpu_cc_ahb_clk
350            - const: gpu_cc_hlos1_vote_gpu_smmu_clk
351            - const: gpu_cc_cx_gmu_clk
352            - const: gpu_cc_hub_cx_int_clk
353            - const: gpu_cc_hub_aon_clk
354
355        clocks:
356          items:
357            - description: GPU memnoc_gfx clock
358            - description: GPU snoc_dvm_gfx clock
359            - description: GPU ahb clock
360            - description: GPU hlos1_vote_GPU smmu clock
361            - description: GPU cx_gmu clock
362            - description: GPU hub_cx_int clock
363            - description: GPU hub_aon clock
364
365  - if:
366      properties:
367        compatible:
368          contains:
369            enum:
370              - qcom,sm6350-smmu-v2
371              - qcom,sm8150-smmu-500
372              - qcom,sm8250-smmu-500
373    then:
374      properties:
375        clock-names:
376          items:
377            - const: ahb
378            - const: bus
379            - const: iface
380
381        clocks:
382          items:
383            - description: bus clock required for AHB bus access
384            - description: bus clock required for downstream bus access and for
385                the smmu ptw
386            - description: interface clock required to access smmu's registers
387                through the TCU's programming interface.
388
389  - if:
390      properties:
391        compatible:
392          items:
393            - enum:
394                - qcom,sm6115-smmu-500
395                - qcom,sm6125-smmu-500
396            - const: qcom,adreno-smmu
397            - const: qcom,smmu-500
398            - const: arm,mmu-500
399    then:
400      properties:
401        clock-names:
402          items:
403            - const: mem
404            - const: hlos
405            - const: iface
406
407        clocks:
408          items:
409            - description: GPU memory bus clock
410            - description: Voter clock required for HLOS SMMU access
411            - description: Interface clock required for register access
412
413  # Disallow clocks for all other platforms with specific compatibles
414  - if:
415      properties:
416        compatible:
417          contains:
418            enum:
419              - cavium,smmu-v2
420              - marvell,ap806-smmu-500
421              - nvidia,smmu-500
422              - qcom,qcm2290-smmu-500
423              - qcom,qdu1000-smmu-500
424              - qcom,sc7180-smmu-500
425              - qcom,sc8180x-smmu-500
426              - qcom,sdm670-smmu-500
427              - qcom,sdm845-smmu-500
428              - qcom,sdx55-smmu-500
429              - qcom,sdx65-smmu-500
430              - qcom,sm6350-smmu-500
431              - qcom,sm6375-smmu-500
432              - qcom,sm8350-smmu-500
433              - qcom,sm8450-smmu-500
434              - qcom,sm8550-smmu-500
435    then:
436      properties:
437        clock-names: false
438        clocks: false
439
440  - if:
441      properties:
442        compatible:
443          contains:
444            const: qcom,sm6375-smmu-500
445    then:
446      properties:
447        power-domains:
448          items:
449            - description: SNoC MMU TBU RT GDSC
450            - description: SNoC MMU TBU NRT GDSC
451            - description: SNoC TURING MMU TBU0 GDSC
452
453      required:
454        - power-domains
455    else:
456      properties:
457        power-domains:
458          maxItems: 1
459
460examples:
461  - |+
462    /* SMMU with stream matching or stream indexing */
463    smmu1: iommu@ba5e0000 {
464            compatible = "arm,smmu-v1";
465            reg = <0xba5e0000 0x10000>;
466            #global-interrupts = <2>;
467            interrupts = <0 32 4>,
468                         <0 33 4>,
469                         <0 34 4>, /* This is the first context interrupt */
470                         <0 35 4>,
471                         <0 36 4>,
472                         <0 37 4>;
473            #iommu-cells = <1>;
474    };
475
476    /* device with two stream IDs, 0 and 7 */
477    master1 {
478            iommus = <&smmu1 0>,
479                     <&smmu1 7>;
480    };
481
482
483    /* SMMU with stream matching */
484    smmu2: iommu@ba5f0000 {
485            compatible = "arm,smmu-v1";
486            reg = <0xba5f0000 0x10000>;
487            #global-interrupts = <2>;
488            interrupts = <0 38 4>,
489                         <0 39 4>,
490                         <0 40 4>, /* This is the first context interrupt */
491                         <0 41 4>,
492                         <0 42 4>,
493                         <0 43 4>;
494            #iommu-cells = <2>;
495    };
496
497    /* device with stream IDs 0 and 7 */
498    master2 {
499            iommus = <&smmu2 0 0>,
500                     <&smmu2 7 0>;
501    };
502
503    /* device with stream IDs 1, 17, 33 and 49 */
504    master3 {
505            iommus = <&smmu2 1 0x30>;
506    };
507
508
509    /* ARM MMU-500 with 10-bit stream ID input configuration */
510    smmu3: iommu@ba600000 {
511            compatible = "arm,mmu-500", "arm,smmu-v2";
512            reg = <0xba600000 0x10000>;
513            #global-interrupts = <2>;
514            interrupts = <0 44 4>,
515                         <0 45 4>,
516                         <0 46 4>, /* This is the first context interrupt */
517                         <0 47 4>,
518                         <0 48 4>,
519                         <0 49 4>;
520            #iommu-cells = <1>;
521            /* always ignore appended 5-bit TBU number */
522            stream-match-mask = <0x7c00>;
523    };
524
525    bus {
526            /* bus whose child devices emit one unique 10-bit stream
527               ID each, but may master through multiple SMMU TBUs */
528            iommu-map = <0 &smmu3 0 0x400>;
529
530
531    };
532
533  - |+
534    /* Qcom's arm,smmu-v2 implementation */
535    #include <dt-bindings/interrupt-controller/arm-gic.h>
536    #include <dt-bindings/interrupt-controller/irq.h>
537    smmu4: iommu@d00000 {
538      compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
539      reg = <0xd00000 0x10000>;
540
541      #global-interrupts = <1>;
542      interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
543             <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
544             <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
545      #iommu-cells = <1>;
546      power-domains = <&mmcc 0>;
547
548      clocks = <&mmcc 123>,
549        <&mmcc 124>;
550      clock-names = "bus", "iface";
551    };
552