1# SPDX-License-Identifier: GPL-2.0 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/interrupt-controller/arm,gic-v3.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: ARM Generic Interrupt Controller, version 3 8 9maintainers: 10 - Marc Zyngier <maz@kernel.org> 11 12description: | 13 AArch64 SMP cores are often associated with a GICv3, providing Private 14 Peripheral Interrupts (PPI), Shared Peripheral Interrupts (SPI), 15 Software Generated Interrupts (SGI), and Locality-specific Peripheral 16 Interrupts (LPI). 17 18allOf: 19 - $ref: /schemas/interrupt-controller.yaml# 20 21properties: 22 compatible: 23 oneOf: 24 - items: 25 - enum: 26 - qcom,msm8996-gic-v3 27 - const: arm,gic-v3 28 - const: arm,gic-v3 29 30 interrupt-controller: true 31 32 "#address-cells": 33 enum: [ 0, 1, 2 ] 34 "#size-cells": 35 enum: [ 1, 2 ] 36 37 ranges: true 38 39 "#interrupt-cells": 40 description: | 41 Specifies the number of cells needed to encode an interrupt source. 42 Must be a single cell with a value of at least 3. 43 If the system requires describing PPI affinity, then the value must 44 be at least 4. 45 46 The 1st cell is the interrupt type; 0 for SPI interrupts, 1 for PPI 47 interrupts, 2 for interrupts in the Extended SPI range, 3 for the 48 Extended PPI range. Other values are reserved for future use. 49 50 The 2nd cell contains the interrupt number for the interrupt type. 51 SPI interrupts are in the range [0-987]. PPI interrupts are in the 52 range [0-15]. Extented SPI interrupts are in the range [0-1023]. 53 Extended PPI interrupts are in the range [0-127]. 54 55 The 3rd cell is the flags, encoded as follows: 56 bits[3:0] trigger type and level flags. 57 1 = edge triggered 58 4 = level triggered 59 60 The 4th cell is a phandle to a node describing a set of CPUs this 61 interrupt is affine to. The interrupt must be a PPI, and the node 62 pointed must be a subnode of the "ppi-partitions" subnode. For 63 interrupt types other than PPI or PPIs that are not partitionned, 64 this cell must be zero. See the "ppi-partitions" node description 65 below. 66 67 Cells 5 and beyond are reserved for future use and must have a value 68 of 0 if present. 69 enum: [ 3, 4 ] 70 71 reg: 72 description: | 73 Specifies base physical address(s) and size of the GIC 74 registers, in the following order: 75 - GIC Distributor interface (GICD) 76 - GIC Redistributors (GICR), one range per redistributor region 77 - GIC CPU interface (GICC) 78 - GIC Hypervisor interface (GICH) 79 - GIC Virtual CPU interface (GICV) 80 81 GICC, GICH and GICV are optional, but must be described if the CPUs 82 support them. Examples of such CPUs are ARM's implementations of the 83 ARMv8.0 architecture such as Cortex-A32, A34, A35, A53, A57, A72 and 84 A73 (this list is not exhaustive). 85 86 minItems: 2 87 maxItems: 4096 # Should be enough? 88 89 interrupts: 90 description: 91 Interrupt source of the VGIC maintenance interrupt. 92 maxItems: 1 93 94 redistributor-stride: 95 description: 96 If using padding pages, specifies the stride of consecutive 97 redistributors. Must be a multiple of 64kB. 98 $ref: /schemas/types.yaml#/definitions/uint64 99 multipleOf: 0x10000 100 exclusiveMinimum: 0 101 102 "#redistributor-regions": 103 description: 104 The number of independent contiguous regions occupied by the 105 redistributors. Required if more than one such region is present. 106 $ref: /schemas/types.yaml#/definitions/uint32 107 maximum: 4096 108 109 msi-controller: 110 description: 111 Only present if the Message Based Interrupt functionnality is 112 being exposed by the HW, and the mbi-ranges property present. 113 114 mbi-ranges: 115 description: 116 A list of pairs <intid span>, where "intid" is the first SPI of a range 117 that can be used an MBI, and "span" the size of that range. Multiple 118 ranges can be provided. 119 $ref: /schemas/types.yaml#/definitions/uint32-matrix 120 items: 121 minItems: 2 122 maxItems: 2 123 124 mbi-alias: 125 description: 126 Address property. Base address of an alias of the GICD region containing 127 only the {SET,CLR}SPI registers to be used if isolation is required, 128 and if supported by the HW. 129 $ref: /schemas/types.yaml#/definitions/uint32-array 130 items: 131 minItems: 1 132 maxItems: 2 133 134 ppi-partitions: 135 type: object 136 description: 137 PPI affinity can be expressed as a single "ppi-partitions" node, 138 containing a set of sub-nodes. 139 patternProperties: 140 "^interrupt-partition-[0-9]+$": 141 type: object 142 properties: 143 affinity: 144 $ref: /schemas/types.yaml#/definitions/phandle-array 145 items: 146 maxItems: 1 147 description: 148 Should be a list of phandles to CPU nodes (as described in 149 Documentation/devicetree/bindings/arm/cpus.yaml). 150 151 required: 152 - affinity 153 154 clocks: 155 maxItems: 1 156 157 clock-names: 158 items: 159 - const: aclk 160 161 power-domains: 162 maxItems: 1 163 164 resets: 165 maxItems: 1 166 167dependencies: 168 mbi-ranges: [ msi-controller ] 169 msi-controller: [ mbi-ranges ] 170 171required: 172 - compatible 173 - reg 174 175patternProperties: 176 "^gic-its@": false 177 "^interrupt-controller@[0-9a-f]+$": false 178 # msi-controller is preferred, but allow other names 179 "^(msi-controller|gic-its|interrupt-controller)@[0-9a-f]+$": 180 type: object 181 description: 182 GICv3 has one or more Interrupt Translation Services (ITS) that are 183 used to route Message Signalled Interrupts (MSI) to the CPUs. 184 properties: 185 compatible: 186 const: arm,gic-v3-its 187 188 msi-controller: true 189 190 "#msi-cells": 191 description: 192 The single msi-cell is the DeviceID of the device which will generate 193 the MSI. 194 const: 1 195 196 reg: 197 description: 198 Specifies the base physical address and size of the ITS registers. 199 maxItems: 1 200 201 socionext,synquacer-pre-its: 202 description: 203 (u32, u32) tuple describing the untranslated 204 address and size of the pre-ITS window. 205 $ref: /schemas/types.yaml#/definitions/uint32-array 206 items: 207 minItems: 2 208 maxItems: 2 209 210 required: 211 - compatible 212 - msi-controller 213 - "#msi-cells" 214 - reg 215 216 additionalProperties: false 217 218additionalProperties: false 219 220examples: 221 - | 222 gic: interrupt-controller@2cf00000 { 223 compatible = "arm,gic-v3"; 224 #interrupt-cells = <3>; 225 #address-cells = <1>; 226 #size-cells = <1>; 227 ranges; 228 interrupt-controller; 229 reg = <0x2f000000 0x10000>, // GICD 230 <0x2f100000 0x200000>, // GICR 231 <0x2c000000 0x2000>, // GICC 232 <0x2c010000 0x2000>, // GICH 233 <0x2c020000 0x2000>; // GICV 234 interrupts = <1 9 4>; 235 236 msi-controller; 237 mbi-ranges = <256 128>; 238 239 msi-controller@2c200000 { 240 compatible = "arm,gic-v3-its"; 241 msi-controller; 242 #msi-cells = <1>; 243 reg = <0x2c200000 0x20000>; 244 }; 245 }; 246 247 - | 248 interrupt-controller@2c010000 { 249 compatible = "arm,gic-v3"; 250 #interrupt-cells = <4>; 251 #address-cells = <1>; 252 #size-cells = <1>; 253 ranges; 254 interrupt-controller; 255 redistributor-stride = <0x0 0x40000>; // 256kB stride 256 #redistributor-regions = <2>; 257 reg = <0x2c010000 0x10000>, // GICD 258 <0x2d000000 0x800000>, // GICR 1: CPUs 0-31 259 <0x2e000000 0x800000>, // GICR 2: CPUs 32-63 260 <0x2c040000 0x2000>, // GICC 261 <0x2c060000 0x2000>, // GICH 262 <0x2c080000 0x2000>; // GICV 263 interrupts = <1 9 4 0>; 264 265 msi-controller@2c200000 { 266 compatible = "arm,gic-v3-its"; 267 msi-controller; 268 #msi-cells = <1>; 269 reg = <0x2c200000 0x20000>; 270 }; 271 272 msi-controller@2c400000 { 273 compatible = "arm,gic-v3-its"; 274 msi-controller; 275 #msi-cells = <1>; 276 reg = <0x2c400000 0x20000>; 277 }; 278 279 ppi-partitions { 280 part0: interrupt-partition-0 { 281 affinity = <&cpu0>, <&cpu2>; 282 }; 283 284 part1: interrupt-partition-1 { 285 affinity = <&cpu1>, <&cpu3>; 286 }; 287 }; 288 }; 289 290 291 device@0 { 292 reg = <0 4>; 293 interrupts = <1 1 4 &part0>; 294 }; 295 296... 297