xref: /freebsd/sys/contrib/device-tree/Bindings/interconnect/samsung,exynos-bus.yaml (revision b97ee269eae3cbaf35c18f51a459aea581c2a7dc) 
1# SPDX-License-Identifier: GPL-2.0
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/interconnect/samsung,exynos-bus.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Samsung Exynos SoC Bus and Interconnect
8
9maintainers:
10  - Chanwoo Choi <cw00.choi@samsung.com>
11  - Krzysztof Kozlowski <krzk@kernel.org>
12
13description: |
14  The Samsung Exynos SoC has many buses for data transfer between DRAM and
15  sub-blocks in SoC. Most Exynos SoCs share the common architecture for buses.
16  Generally, each bus of Exynos SoC includes a source clock and a power line,
17  which are able to change the clock frequency of the bus in runtime. To
18  monitor the usage of each bus in runtime, the driver uses the PPMU (Platform
19  Performance Monitoring Unit), which is able to measure the current load of
20  sub-blocks.
21
22  The Exynos SoC includes the various sub-blocks which have the each AXI bus.
23  The each AXI bus has the owned source clock but, has not the only owned power
24  line. The power line might be shared among one more sub-blocks.  So, we can
25  divide into two type of device as the role of each sub-block.  There are two
26  type of bus devices as following::
27   - parent bus device
28   - passive bus device
29
30  Basically, parent and passive bus device share the same power line.  The
31  parent bus device can only change the voltage of shared power line and the
32  rest bus devices (passive bus device) depend on the decision of the parent
33  bus device. If there are three blocks which share the VDD_xxx power line,
34  Only one block should be parent device and then the rest blocks should depend
35  on the parent device as passive device.
36
37    VDD_xxx |--- A block (parent)
38      |--- B block (passive)
39      |--- C block (passive)
40
41  There are a little different composition among Exynos SoC because each Exynos
42  SoC has different sub-blocks. Therefore, such difference should be specified
43  in devicetree file instead of each device driver. In result, this driver is
44  able to support the bus frequency for all Exynos SoCs.
45
46  Detailed correlation between sub-blocks and power line according
47  to Exynos SoC::
48   - In case of Exynos3250, there are two power line as following::
49     VDD_MIF |--- DMC (Dynamic Memory Controller)
50
51     VDD_INT |--- LEFTBUS (parent device)
52       |--- PERIL
53       |--- MFC
54       |--- G3D
55       |--- RIGHTBUS
56       |--- PERIR
57       |--- FSYS
58       |--- LCD0
59       |--- PERIR
60       |--- ISP
61       |--- CAM
62
63     - MIF bus's frequency/voltage table
64       -----------------------
65       |Lv| Freq   | Voltage |
66       -----------------------
67       |L1| 50000  |800000   |
68       |L2| 100000 |800000   |
69       |L3| 134000 |800000   |
70       |L4| 200000 |825000   |
71       |L5| 400000 |875000   |
72       -----------------------
73
74     - INT bus's frequency/voltage table
75       ----------------------------------------------------------
76       |Block|LEFTBUS|RIGHTBUS|MCUISP |ISP    |PERIL  ||VDD_INT |
77       | name|       |LCD0    |       |       |       ||        |
78       |     |       |FSYS    |       |       |       ||        |
79       |     |       |MFC     |       |       |       ||        |
80       ----------------------------------------------------------
81       |Mode |*parent|passive |passive|passive|passive||        |
82       ----------------------------------------------------------
83       |Lv   |Frequency                               ||Voltage |
84       ----------------------------------------------------------
85       |L1   |50000  |50000   |50000  |50000  |50000  ||900000  |
86       |L2   |80000  |80000   |80000  |80000  |80000  ||900000  |
87       |L3   |100000 |100000  |100000 |100000 |100000 ||1000000 |
88       |L4   |134000 |134000  |200000 |200000 |       ||1000000 |
89       |L5   |200000 |200000  |400000 |300000 |       ||1000000 |
90       ----------------------------------------------------------
91
92   - In case of Exynos4210, there is one power line as following::
93     VDD_INT |--- DMC (parent device, Dynamic Memory Controller)
94       |--- LEFTBUS
95       |--- PERIL
96       |--- MFC(L)
97       |--- G3D
98       |--- TV
99       |--- LCD0
100       |--- RIGHTBUS
101       |--- PERIR
102       |--- MFC(R)
103       |--- CAM
104       |--- FSYS
105       |--- GPS
106       |--- LCD0
107       |--- LCD1
108
109   - In case of Exynos4x12, there are two power line as following::
110     VDD_MIF |--- DMC (Dynamic Memory Controller)
111
112     VDD_INT |--- LEFTBUS (parent device)
113       |--- PERIL
114       |--- MFC(L)
115       |--- G3D
116       |--- TV
117       |--- IMAGE
118       |--- RIGHTBUS
119       |--- PERIR
120       |--- MFC(R)
121       |--- CAM
122       |--- FSYS
123       |--- GPS
124       |--- LCD0
125       |--- ISP
126
127   - In case of Exynos5422, there are two power line as following::
128     VDD_MIF |--- DREX 0 (parent device, DRAM EXpress controller)
129             |--- DREX 1
130
131     VDD_INT |--- NoC_Core (parent device)
132       |--- G2D
133       |--- G3D
134       |--- DISP1
135       |--- NoC_WCORE
136       |--- GSCL
137       |--- MSCL
138       |--- ISP
139       |--- MFC
140       |--- GEN
141       |--- PERIS
142       |--- PERIC
143       |--- FSYS
144       |--- FSYS2
145
146   - In case of Exynos5433, there is VDD_INT power line as following::
147     VDD_INT |--- G2D (parent device)
148       |--- MSCL
149       |--- GSCL
150       |--- JPEG
151       |--- MFC
152       |--- HEVC
153       |--- BUS0
154       |--- BUS1
155       |--- BUS2
156       |--- PERIS (Fixed clock rate)
157       |--- PERIC (Fixed clock rate)
158       |--- FSYS  (Fixed clock rate)
159
160properties:
161  compatible:
162    enum:
163      - samsung,exynos-bus
164
165  clocks:
166    maxItems: 1
167
168  clock-names:
169    items:
170      - const: bus
171
172  devfreq:
173    $ref: /schemas/types.yaml#/definitions/phandle
174    description:
175      Parent bus device. Valid and required only for the passive bus devices.
176
177  devfreq-events:
178    $ref: /schemas/types.yaml#/definitions/phandle-array
179    minItems: 1
180    maxItems: 4
181    description:
182      Devfreq-event device to monitor the current utilization of buses. Valid
183      and required only for the parent bus devices.
184
185  exynos,saturation-ratio:
186    $ref: /schemas/types.yaml#/definitions/uint32
187    description:
188      Percentage value which is used to calibrate the performance count against
189      total cycle count.  Valid only for the parent bus devices.
190
191  '#interconnect-cells':
192    const: 0
193
194  interconnects:
195    minItems: 1
196    maxItems: 2
197
198  operating-points-v2: true
199
200  samsung,data-clock-ratio:
201    $ref: /schemas/types.yaml#/definitions/uint32
202    default: 8
203    description:
204      Ratio of the data throughput in B/s to minimum data clock frequency in
205      Hz.
206
207  vdd-supply:
208    description:
209      Main bus power rail. Valid and required only for the parent bus devices.
210
211required:
212  - compatible
213  - clocks
214  - clock-names
215  - operating-points-v2
216
217additionalProperties: false
218
219examples:
220  - |
221    #include <dt-bindings/clock/exynos3250.h>
222
223    bus-dmc {
224        compatible = "samsung,exynos-bus";
225        clocks = <&cmu_dmc CLK_DIV_DMC>;
226        clock-names = "bus";
227        operating-points-v2 = <&bus_dmc_opp_table>;
228        devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
229        vdd-supply = <&buck1_reg>;
230    };
231
232    ppmu_dmc0: ppmu@106a0000 {
233        compatible = "samsung,exynos-ppmu";
234        reg = <0x106a0000 0x2000>;
235        events {
236            ppmu_dmc0_3: ppmu-event3-dmc0 {
237                event-name = "ppmu-event3-dmc0";
238            };
239        };
240    };
241
242    bus_leftbus: bus-leftbus {
243        compatible = "samsung,exynos-bus";
244        clocks = <&cmu CLK_DIV_GDL>;
245        clock-names = "bus";
246        operating-points-v2 = <&bus_leftbus_opp_table>;
247        devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
248        vdd-supply = <&buck3_reg>;
249    };
250
251    bus-rightbus {
252        compatible = "samsung,exynos-bus";
253        clocks = <&cmu CLK_DIV_GDR>;
254        clock-names = "bus";
255        operating-points-v2 = <&bus_leftbus_opp_table>;
256        devfreq = <&bus_leftbus>;
257    };
258
259  - |
260    dmc: bus-dmc {
261        compatible = "samsung,exynos-bus";
262        clocks = <&clock CLK_DIV_DMC>;
263        clock-names = "bus";
264        operating-points-v2 = <&bus_dmc_opp_table>;
265        samsung,data-clock-ratio = <4>;
266        #interconnect-cells = <0>;
267        devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
268        vdd-supply = <&buck1_reg>;
269    };
270
271    leftbus: bus-leftbus {
272        compatible = "samsung,exynos-bus";
273        clocks = <&clock CLK_DIV_GDL>;
274        clock-names = "bus";
275        operating-points-v2 = <&bus_leftbus_opp_table>;
276        interconnects = <&dmc>;
277        #interconnect-cells = <0>;
278        devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
279        vdd-supply = <&buck3_reg>;
280    };
281
282    display: bus-display {
283        compatible = "samsung,exynos-bus";
284        clocks = <&clock CLK_DIV_ACLK_266>;
285        clock-names = "bus";
286        operating-points-v2 = <&bus_display_opp_table>;
287        interconnects = <&leftbus &dmc>;
288        #interconnect-cells = <0>;
289        devfreq = <&leftbus>;
290    };
291