1# SPDX-License-Identifier: GPL-2.0 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/iio/multiplexer/io-channel-mux.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: I/O channel multiplexer 8 9maintainers: 10 - Peter Rosin <peda@axentia.se> 11 12description: | 13 If a multiplexer is used to select which hardware signal is fed to 14 e.g. an ADC channel, these bindings describe that situation. 15 16 For each non-empty string in the channels property, an io-channel will be 17 created. The number of this io-channel is the same as the index into the list 18 of strings in the channels property, and also matches the mux controller 19 state. The mux controller state is described in 20 Documentation/devicetree/bindings/mux/mux-controller.yaml 21 22properties: 23 24 compatible: 25 const: io-channel-mux 26 27 io-channels: 28 maxItems: 1 29 description: Channel node of the parent channel that has multiplexed input. 30 31 io-channel-names: 32 const: parent 33 34 mux-controls: true 35 mux-control-names: true 36 37 channels: 38 $ref: /schemas/types.yaml#/definitions/non-unique-string-array 39 description: 40 List of strings, labeling the mux controller states. An empty 41 string for a state means that the channel is not available. 42 43 settle-time-us: 44 default: 0 45 description: 46 Time required for analog signals to settle after muxing. 47 48 "#io-channel-cells": 49 const: 1 50 51required: 52 - compatible 53 - io-channels 54 - io-channel-names 55 - mux-controls 56 - channels 57 58additionalProperties: false 59 60examples: 61 - | 62 #include <dt-bindings/gpio/gpio.h> 63 mux: mux-controller { 64 compatible = "gpio-mux"; 65 #mux-control-cells = <0>; 66 67 mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>, 68 <&pioA 1 GPIO_ACTIVE_HIGH>; 69 }; 70 71 adc-mux { 72 compatible = "io-channel-mux"; 73 io-channels = <&adc 0>; 74 io-channel-names = "parent"; 75 76 mux-controls = <&mux>; 77 channels = "sync", "in", "system-regulator"; 78 }; 79... 80