1* Texas Instruments OPT3001 Ambient Light Sensor 2 3The driver supports interrupt-driven and interrupt-less operation, depending 4on whether an interrupt property has been populated into the DT. Note that 5the optional generation of IIO events on rising/falling light threshold changes 6requires the use of interrupts. Without interrupts, only the simple reading 7of the current light value is supported through the IIO API. 8 9https://www.ti.com/product/opt3001 10 11Required properties: 12 - compatible: should be "ti,opt3001" 13 - reg: the I2C address of the sensor 14 15Optional properties: 16 - interrupts: interrupt mapping for GPIO IRQ (configure for falling edge) 17 18Example: 19 20opt3001@44 { 21 compatible = "ti,opt3001"; 22 reg = <0x44>; 23 interrupt-parent = <&gpio1>; 24 interrupts = <28 IRQ_TYPE_EDGE_FALLING>; 25}; 26