xref: /freebsd/sys/contrib/device-tree/Bindings/iio/imu/invensense,icm42600.yaml (revision 6ba2210ee039f2f12878c217bcf058e9c8b26b29) 
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/iio/imu/invensense,icm42600.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: InvenSense ICM-426xx Inertial Measurement Unit
8
9maintainers:
10  - Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
11
12description: |
13  6-axis MotionTracking device that combines a 3-axis gyroscope and a 3-axis
14  accelerometer.
15
16  It has a configurable host interface that supports I3C, I2C and SPI serial
17  communication, features a 2kB FIFO and 2 programmable interrupts with
18  ultra-low-power wake-on-motion support to minimize system power consumption.
19
20  Other industry-leading features include InvenSense on-chip APEX Motion
21  Processing engine for gesture recognition, activity classification, and
22  pedometer, along with programmable digital filters, and an embedded
23  temperature sensor.
24
25  https://invensense.tdk.com/wp-content/uploads/2020/03/DS-000292-ICM-42605-v1.4.pdf
26
27properties:
28  compatible:
29    enum:
30      - invensense,icm42600
31      - invensense,icm42602
32      - invensense,icm42605
33      - invensense,icm42622
34
35  reg:
36    maxItems: 1
37
38  interrupts:
39    maxItems: 1
40
41  drive-open-drain:
42    type: boolean
43
44  vdd-supply:
45    description: Regulator that provides power to the sensor
46
47  vddio-supply:
48    description: Regulator that provides power to the bus
49
50  spi-max-frequency: true
51  spi-cpha: true
52  spi-cpol: true
53
54required:
55  - compatible
56  - reg
57  - interrupts
58
59additionalProperties: false
60
61examples:
62  - |
63    #include <dt-bindings/gpio/gpio.h>
64    #include <dt-bindings/interrupt-controller/irq.h>
65    i2c0 {
66        #address-cells = <1>;
67        #size-cells = <0>;
68
69        icm42605@68 {
70          compatible = "invensense,icm42605";
71          reg = <0x68>;
72          interrupt-parent = <&gpio2>;
73          interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
74          vdd-supply = <&vdd>;
75          vddio-supply = <&vddio>;
76        };
77    };
78  - |
79    #include <dt-bindings/gpio/gpio.h>
80    #include <dt-bindings/interrupt-controller/irq.h>
81    spi0 {
82        #address-cells = <1>;
83        #size-cells = <0>;
84
85        icm42602@0 {
86          compatible = "invensense,icm42602";
87          reg = <0>;
88          spi-max-frequency = <24000000>;
89          spi-cpha;
90          spi-cpol;
91          interrupt-parent = <&gpio1>;
92          interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
93          vdd-supply = <&vdd>;
94          vddio-supply = <&vddio>;
95        };
96    };
97