1Texas Instruments AFE4403 Heart rate and Pulse Oximeter 2 3Required properties: 4 - compatible : Should be "ti,afe4403". 5 - reg : SPI chip select address of device. 6 - tx-supply : Regulator supply to transmitting LEDs. 7 - interrupts : The interrupt line the device ADC_RDY pin is 8 connected to. For details refer to, 9 ../../interrupt-controller/interrupts.txt. 10 11Optional properties: 12 - reset-gpios : GPIO used to reset the device. 13 For details refer to, ../../gpio/gpio.txt. 14 15For other required and optional properties of SPI slave nodes 16please refer to ../../spi/spi-bus.txt. 17 18Example: 19 20&spi0 { 21 heart_mon@0 { 22 compatible = "ti,afe4403"; 23 reg = <0>; 24 spi-max-frequency = <10000000>; 25 26 tx-supply = <&vbat>; 27 28 interrupt-parent = <&gpio1>; 29 interrupts = <28 IRQ_TYPE_EDGE_RISING>; 30 31 reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; 32 }; 33}; 34