xref: /freebsd/sys/contrib/device-tree/Bindings/iio/frequency/adi,admv1014.yaml (revision bdd1243df58e60e85101c09001d9812a789b6bc4) 
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/iio/frequency/adi,admv1014.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: ADMV1014 Microwave Downconverter
8
9maintainers:
10  - Antoniu Miclaus <antoniu.miclaus@analog.com>
11
12description: |
13   Wideband, microwave downconverter optimized for point to point microwave
14   radio designs operating in the 24 GHz to 44 GHz frequency range.
15
16   https://www.analog.com/en/products/admv1014.html
17
18properties:
19  compatible:
20    enum:
21      - adi,admv1014
22
23  reg:
24    maxItems: 1
25
26  spi-max-frequency:
27    maximum: 1000000
28
29  clocks:
30    maxItems: 1
31
32  clock-names:
33    items:
34      - const: lo_in
35    description:
36      External clock that provides the Local Oscilator input.
37
38  vcm-supply:
39    description:
40      Common-mode voltage regulator.
41
42  vcc-if-bb-supply:
43    description:
44      BB and IF supply voltage regulator.
45
46  vcc-vga-supply:
47    description:
48      RF Amplifier supply voltage regulator.
49
50  vcc-vva-supply:
51    description:
52      VVA Control Circuit supply voltage regulator.
53
54  vcc-lna-3p3-supply:
55    description:
56      Low Noise Amplifier 3.3V supply voltage regulator.
57
58  vcc-lna-1p5-supply:
59    description:
60      Low Noise Amplifier 1.5V supply voltage regulator.
61
62  vcc-bg-supply:
63    description:
64      Band Gap Circuit supply voltage regulator.
65
66  vcc-quad-supply:
67    description:
68      Quadruple supply voltage regulator.
69
70  vcc-mixer-supply:
71    description:
72      Mixer supply voltage regulator.
73
74  adi,input-mode:
75    description:
76      Select the input mode.
77      iq - in-phase quadrature (I/Q) input
78      if - complex intermediate frequency (IF) input
79    enum: [iq, if]
80
81  adi,detector-enable:
82    description:
83      Digital Rx Detector Enable. The Square Law Detector output is
84      available at output pin VDET.
85    type: boolean
86
87  adi,p1db-compensation-enable:
88    description:
89      Turn on bits to optimize P1dB.
90    type: boolean
91
92  adi,quad-se-mode:
93    description:
94      Switch the LO path from differential to single-ended operation.
95      se-neg - Single-Ended Mode, Negative Side Disabled.
96      se-pos - Single-Ended Mode, Positive Side Disabled.
97      diff - Differential Mode.
98    enum: [se-neg, se-pos, diff]
99
100required:
101  - compatible
102  - reg
103  - clocks
104  - clock-names
105  - vcm-supply
106
107additionalProperties: false
108
109examples:
110  - |
111    spi {
112      #address-cells = <1>;
113      #size-cells = <0>;
114      converter@0 {
115        compatible = "adi,admv1014";
116        reg = <0>;
117        spi-max-frequency = <1000000>;
118        clocks = <&admv1014_lo>;
119        clock-names = "lo_in";
120        vcm-supply = <&vcm>;
121        vcc-if-bb-supply = <&vcc_if_bb>;
122        vcc-vga-supply = <&vcc_vga>;
123        vcc-vva-supply = <&vcc_vva>;
124        vcc-lna-3p3-supply = <&vcc_lna_3p3>;
125        vcc-lna-1p5-supply = <&vcc_lna_1p5>;
126        vcc-bg-supply = <&vcc_bg>;
127        vcc-quad-supply = <&vcc_quad>;
128        vcc-mixer-supply = <&vcc_mixer>;
129        adi,quad-se-mode = "diff";
130        adi,detector-enable;
131        adi,p1db-compensation-enable;
132      };
133    };
134...
135