1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/iio/accel/nxp,fxls8962af.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: NXP FXLS8962AF/FXLS8964AF Accelerometer driver 8 9maintainers: 10 - Sean Nyekjaer <sean@geanix.com> 11 12description: | 13 NXP FXLS8962AF/FXLS8964AF Accelerometer driver that supports 14 SPI and I2C interface. 15 https://www.nxp.com/docs/en/data-sheet/FXLS8962AF.pdf 16 https://www.nxp.com/docs/en/data-sheet/FXLS8964AF.pdf 17 18properties: 19 compatible: 20 enum: 21 - nxp,fxls8962af 22 - nxp,fxls8964af 23 24 reg: 25 maxItems: 1 26 27 vdd-supply: 28 description: phandle to the regulator that provides power to the accelerometer 29 30 spi-max-frequency: true 31 32 interrupts: 33 maxItems: 1 34 35 interrupt-names: 36 enum: 37 - INT1 38 - INT2 39 40 drive-open-drain: 41 type: boolean 42 43required: 44 - compatible 45 - reg 46 47additionalProperties: false 48 49examples: 50 - | 51 #include <dt-bindings/interrupt-controller/irq.h> 52 i2c0 { 53 #address-cells = <1>; 54 #size-cells = <0>; 55 56 /* Example for a I2C device node */ 57 accelerometer@62 { 58 compatible = "nxp,fxls8962af"; 59 reg = <0x62>; 60 interrupt-parent = <&gpio0>; 61 interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; 62 interrupt-names = "INT1"; 63 }; 64 }; 65 - | 66 #include <dt-bindings/interrupt-controller/irq.h> 67 spi0 { 68 #address-cells = <1>; 69 #size-cells = <0>; 70 71 /* Example for a SPI device node */ 72 accelerometer@0 { 73 compatible = "nxp,fxls8962af"; 74 reg = <0>; 75 spi-max-frequency = <4000000>; 76 interrupt-parent = <&gpio0>; 77 interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; 78 interrupt-names = "INT1"; 79 }; 80 }; 81