1* Bosch BMA023 / BMA150/ BMA180 / BMA25x / SMB380 triaxial acceleration sensor 2 3https://media.digikey.com/pdf/Data%20Sheets/Bosch/BMA150.pdf 4http://omapworld.com/BMA180_111_1002839.pdf 5http://ae-bst.resource.bosch.com/media/products/dokumente/bma250/bst-bma250-ds002-05.pdf 6 7Required properties: 8 9 - compatible : should be one of: 10 "bosch,bma023" 11 "bosch,bma150" 12 "bosch,bma180" 13 "bosch,bma250" 14 "bosch,bma254" 15 "bosch,smb380" 16 - reg : the I2C address of the sensor 17 - vdd-supply : regulator phandle connected to the VDD pin 18 - vddio-supply : regulator phandle connected to the VDDIO pin 19 20Optional properties: 21 22 - interrupts : interrupt mapping for GPIO IRQ, it should by configured with 23 flags IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING 24 For the bma250 the first interrupt listed must be the one 25 connected to the INT1 pin, the second (optional) interrupt 26 listed must be the one connected to the INT2 pin. 27 28Example: 29 30bma180@40 { 31 compatible = "bosch,bma180"; 32 reg = <0x40>; 33 interrupt-parent = <&gpio6>; 34 interrupts = <18 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>; 35}; 36