1# SPDX-License-Identifier: GPL-2.0 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/iio/accel/adi,adxl372.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: Analog Devices ADXL372 3-Axis, +/-(200g) Digital Accelerometer 8 9maintainers: 10 - Stefan Popa <stefan.popa@analog.com> 11 12description: | 13 Analog Devices ADXL372 3-Axis, +/-(200g) Digital Accelerometer that supports 14 both I2C & SPI interfaces 15 https://www.analog.com/en/products/adxl372.html 16 17properties: 18 compatible: 19 enum: 20 - adi,adxl372 21 22 reg: 23 maxItems: 1 24 25 interrupts: 26 maxItems: 1 27 28required: 29 - compatible 30 - reg 31 - interrupts 32 33examples: 34 - | 35 #include <dt-bindings/gpio/gpio.h> 36 #include <dt-bindings/interrupt-controller/irq.h> 37 i2c0 { 38 #address-cells = <1>; 39 #size-cells = <0>; 40 41 /* Example for a I2C device node */ 42 accelerometer@53 { 43 compatible = "adi,adxl372"; 44 reg = <0x53>; 45 interrupt-parent = <&gpio>; 46 interrupts = <25 IRQ_TYPE_EDGE_FALLING>; 47 }; 48 }; 49 - | 50 #include <dt-bindings/gpio/gpio.h> 51 #include <dt-bindings/interrupt-controller/irq.h> 52 spi0 { 53 #address-cells = <1>; 54 #size-cells = <0>; 55 56 accelerometer@0 { 57 compatible = "adi,adxl372"; 58 reg = <0>; 59 spi-max-frequency = <1000000>; 60 interrupt-parent = <&gpio>; 61 interrupts = <25 IRQ_TYPE_EDGE_FALLING>; 62 }; 63 }; 64