xref: /freebsd/sys/contrib/device-tree/Bindings/i2c/samsung,s3c2410-i2c.yaml (revision ebacd8013fe5f7fdf9f6a5b286f6680dd2891036) 
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/i2c/samsung,s3c2410-i2c.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Samsung S3C/S5P/Exynos SoC I2C Controller
8
9maintainers:
10  - Krzysztof Kozlowski <krzk@kernel.org>
11
12properties:
13  compatible:
14    enum:
15      - samsung,s3c2410-i2c
16      - samsung,s3c2440-i2c
17        # For s3c2440-like I2C used inside HDMIPHY block found on several SoCs:
18      - samsung,s3c2440-hdmiphy-i2c
19        # For s3c2440-like I2C used as a host to SATA PHY controller on an
20        # internal bus:
21      - samsung,exynos5-sata-phy-i2c
22
23  '#address-cells':
24    const: 1
25
26  clocks:
27    maxItems: 1
28
29  clock-names:
30    items:
31      - const: i2c
32
33  gpios:
34    description: |
35      The order of the GPIOs should be the following:: <SDA, SCL>.  The GPIO
36      specifier depends on the gpio controller. Required in all cases except
37      for "samsung,s3c2440-hdmiphy-i2c" whose input/output lines are
38      permanently wired to the respective client.
39      This property is deprecated. Use "pinctrl-0" and "pinctrl-names" instead.
40    deprecated: yes
41
42  interrupts:
43    maxItems: 1
44
45  reg:
46    maxItems: 1
47
48  samsung,i2c-max-bus-freq:
49    $ref: /schemas/types.yaml#/definitions/uint32
50    description:
51      Desired frequency in Hz of the bus.
52    default: 100000
53
54  samsung,i2c-sda-delay:
55    $ref: /schemas/types.yaml#/definitions/uint32
56    description:
57      Delay (in ns) applied to data line (SDA) edges.
58    default: 0
59
60  samsung,i2c-slave-addr:
61    $ref: /schemas/types.yaml#/definitions/uint32
62    description:
63      Slave address in multi-master environment.
64    default: 0
65
66  samsung,sysreg-phandle:
67    $ref: /schemas/types.yaml#/definitions/phandle
68    description: Pandle to syscon used to control the system registers.
69
70  '#size-cells':
71    const: 0
72
73required:
74  - compatible
75  - reg
76
77allOf:
78  - $ref: /schemas/i2c/i2c-controller.yaml#
79  - if:
80      properties:
81        compatible:
82          contains:
83            enum:
84              - samsung,s3c2440-hdmiphy-i2c
85              - samsung,exynos5-sata-phy-i2c
86    then:
87      properties:
88        gpios: false
89
90  - if:
91      properties:
92        compatible:
93          contains:
94            enum:
95              - samsung,s3c2410-i2c
96              - samsung,s3c2440-i2c
97              - samsung,s3c2440-hdmiphy-i2c
98    then:
99      required:
100        - interrupts
101
102unevaluatedProperties: false
103
104examples:
105  - |
106    #include <dt-bindings/clock/exynos5250.h>
107    #include <dt-bindings/interrupt-controller/arm-gic.h>
108
109    i2c@12c60000 {
110        compatible = "samsung,s3c2440-i2c";
111        reg = <0x12C60000 0x100>;
112        interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
113        #address-cells = <1>;
114        #size-cells = <0>;
115        clocks = <&clock CLK_I2C0>;
116        clock-names = "i2c";
117        pinctrl-names = "default";
118        pinctrl-0 = <&i2c0_bus>;
119
120        samsung,sysreg-phandle = <&sysreg_system_controller>;
121        samsung,i2c-sda-delay = <100>;
122        samsung,i2c-max-bus-freq = <20000>;
123        samsung,i2c-slave-addr = <0x66>;
124
125        eeprom@50 {
126            compatible = "samsung,s524ad0xd1", "atmel,24c128";
127            reg = <0x50>;
128        };
129    };
130
131    i2c@12ce0000 {
132        compatible = "samsung,s3c2440-hdmiphy-i2c";
133        reg = <0x12CE0000 0x1000>;
134        interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
135        #address-cells = <1>;
136        #size-cells = <0>;
137        clocks = <&clock CLK_I2C_HDMI>;
138        clock-names = "i2c";
139
140        samsung,i2c-sda-delay = <100>;
141        samsung,i2c-max-bus-freq = <66000>;
142
143        phy-i2c@38 {
144            compatible = "samsung,exynos4212-hdmiphy";
145            reg = <0x38>;
146        };
147    };
148
149    i2c@121d0000 {
150        compatible = "samsung,exynos5-sata-phy-i2c";
151        reg = <0x121D0000 0x100>;
152        #address-cells = <1>;
153        #size-cells = <0>;
154        clocks = <&clock CLK_SATA_PHYI2C>;
155        clock-names = "i2c";
156
157        samsung,i2c-sda-delay = <100>;
158        samsung,i2c-max-bus-freq = <40000>;
159
160        phy-i2c@38 {
161            compatible = "samsung,exynos-sataphy-i2c";
162            reg = <0x38>;
163        };
164    };
165