1* MediaTek's I2C controller 2 3The MediaTek's I2C controller is used to interface with I2C devices. 4 5Required properties: 6 - compatible: value should be either of the following. 7 "mediatek,mt2701-i2c", "mediatek,mt6577-i2c": for MediaTek MT2701 8 "mediatek,mt2712-i2c": for MediaTek MT2712 9 "mediatek,mt6577-i2c": for MediaTek MT6577 10 "mediatek,mt6589-i2c": for MediaTek MT6589 11 "mediatek,mt6797-i2c", "mediatek,mt6577-i2c": for MediaTek MT6797 12 "mediatek,mt7622-i2c": for MediaTek MT7622 13 "mediatek,mt7623-i2c", "mediatek,mt6577-i2c": for MediaTek MT7623 14 "mediatek,mt7629-i2c", "mediatek,mt2712-i2c": for MediaTek MT7629 15 "mediatek,mt8173-i2c": for MediaTek MT8173 16 "mediatek,mt8183-i2c": for MediaTek MT8183 17 "mediatek,mt8192-i2c": for MediaTek MT8192 18 "mediatek,mt8516-i2c", "mediatek,mt2712-i2c": for MediaTek MT8516 19 - reg: physical base address of the controller and dma base, length of memory 20 mapped region. 21 - interrupts: interrupt number to the cpu. 22 - clock-div: the fixed value for frequency divider of clock source in i2c 23 module. Each IC may be different. 24 - clocks: clock name from clock manager 25 - clock-names: Must include "main" and "dma", "arb" is for multi-master that 26 one bus has more than two i2c controllers, if enable have-pmic need include 27 "pmic" extra. 28 29Optional properties: 30 - clock-frequency: Frequency in Hz of the bus when transfer, the default value 31 is 100000. 32 - mediatek,have-pmic: platform can control i2c form special pmic side. 33 Only mt6589 and mt8135 support this feature. 34 - mediatek,use-push-pull: IO config use push-pull mode. 35 36Example: 37 38 i2c0: i2c@1100d000 { 39 compatible = "mediatek,mt6577-i2c"; 40 reg = <0x1100d000 0x70>, 41 <0x11000300 0x80>; 42 interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>; 43 clock-frequency = <400000>; 44 mediatek,have-pmic; 45 clock-div = <16>; 46 clocks = <&i2c0_ck>, <&ap_dma_ck>; 47 clock-names = "main", "dma"; 48 }; 49 50