1# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) 2%YAML 1.2 3--- 4 5$id: http://devicetree.org/schemas/hwmon/ti,tmp513.yaml# 6$schema: http://devicetree.org/meta-schemas/core.yaml# 7 8title: TMP513/512 system monitor sensor 9 10maintainers: 11 - Eric Tremblay <etremblay@distech-controls.com> 12 13description: | 14 The TMP512 (dual-channel) and TMP513 (triple-channel) are system monitors 15 that include remote sensors, a local temperature sensor, and a high-side 16 current shunt monitor. These system monitors have the capability of measuring 17 remote temperatures, on-chip temperatures, and system voltage/power/current 18 consumption. 19 20 Datasheets: 21 https://www.ti.com/lit/gpn/tmp513 22 https://www.ti.com/lit/gpn/tmp512 23 24 25properties: 26 compatible: 27 enum: 28 - ti,tmp512 29 - ti,tmp513 30 31 reg: 32 maxItems: 1 33 34 shunt-resistor-micro-ohms: 35 description: | 36 If 0, the calibration process will be skiped and the current and power 37 measurement engine will not work. Temperature and voltage measurement 38 will continue to work. The shunt value also need to respect: 39 rshunt <= pga-gain * 40 * 1000 * 1000. 40 If not, it's not possible to compute a valid calibration value. 41 default: 1000 42 43 ti,pga-gain: 44 description: | 45 The gain value for the PGA function. This is 8, 4, 2 or 1. 46 The PGA gain affect the shunt voltage range. 47 The range will be equal to: pga-gain * 40mV 48 $ref: /schemas/types.yaml#/definitions/uint32 49 enum: [1, 2, 4, 8] 50 default: 8 51 52 ti,bus-range-microvolt: 53 description: | 54 This is the operating range of the bus voltage in microvolt 55 enum: [16000000, 32000000] 56 default: 32000000 57 58 ti,nfactor: 59 description: | 60 Array of three(TMP513) or two(TMP512) n-Factor value for each remote 61 temperature channel. 62 See datasheet Table 11 for n-Factor range list and value interpretation. 63 $ref: /schemas/types.yaml#/definitions/uint32-array 64 minItems: 2 65 maxItems: 3 66 items: 67 default: 0x00 68 minimum: 0x00 69 maximum: 0xFF 70 71required: 72 - compatible 73 - reg 74 75additionalProperties: false 76 77examples: 78 - | 79 i2c { 80 #address-cells = <1>; 81 #size-cells = <0>; 82 83 tmp513@5c { 84 compatible = "ti,tmp513"; 85 reg = <0x5C>; 86 shunt-resistor-micro-ohms = <330000>; 87 ti,bus-range-microvolt = <32000000>; 88 ti,pga-gain = <8>; 89 ti,nfactor = <0x1 0xF3 0x00>; 90 }; 91 }; 92