xref: /freebsd/sys/contrib/device-tree/Bindings/gpio/gpio-grgpio.txt (revision acb1f1269c6f4ff89a0d28ba742f6687e9ef779d)
1Aeroflex Gaisler GRGPIO General Purpose I/O cores.
2
3The GRGPIO GPIO core is available in the GRLIB VHDL IP core library.
4
5Note: In the ordinary environment for the GRGPIO core, a Leon SPARC system,
6these properties are built from information in the AMBA plug&play.
7
8Required properties:
9
10- name : Should be "GAISLER_GPIO" or "01_01a"
11
12- reg : Address and length of the register set for the device
13
14- interrupts : Interrupt numbers for this device
15
16Optional properties:
17
18- nbits : The number of gpio lines. If not present driver assumes 32 lines.
19
20- irqmap : An array with an index for each gpio line. An index is either a valid
21	index into the interrupts property array, or 0xffffffff that indicates
22	no irq for that line. Driver provides no interrupt support if not
23	present.
24
25For further information look in the documentation for the GLIB IP core library:
26http://www.gaisler.com/products/grlib/grip.pdf
27