1NVIDIA Tegra20/Tegra30/Tegr114/Tegra124 fuse block. 2 3Required properties: 4- compatible : For Tegra20, must contain "nvidia,tegra20-efuse". For Tegra30, 5 must contain "nvidia,tegra30-efuse". For Tegra114, must contain 6 "nvidia,tegra114-efuse". For Tegra124, must contain "nvidia,tegra124-efuse". 7 For Tegra132 must contain "nvidia,tegra132-efuse", "nvidia,tegra124-efuse". 8 For Tegra210 must contain "nvidia,tegra210-efuse". For Tegra186 must contain 9 "nvidia,tegra186-efuse". For Tegra194 must contain "nvidia,tegra194-efuse". 10 Details: 11 nvidia,tegra20-efuse: Tegra20 requires using APB DMA to read the fuse data 12 due to a hardware bug. Tegra20 also lacks certain information which is 13 available in later generations such as fab code, lot code, wafer id,.. 14 nvidia,tegra30-efuse, nvidia,tegra114-efuse and nvidia,tegra124-efuse: 15 The differences between these SoCs are the size of the efuse array, 16 the location of the spare (OEM programmable) bits and the location of 17 the speedo data. 18- reg: Should contain 1 entry: the entry gives the physical address and length 19 of the fuse registers. 20- clocks: Must contain an entry for each entry in clock-names. 21 See ../clocks/clock-bindings.txt for details. 22- clock-names: Must include the following entries: 23 - fuse 24- resets: Must contain an entry for each entry in reset-names. 25 See ../reset/reset.txt for details. 26- reset-names: Must include the following entries: 27 - fuse 28 29Example: 30 31 fuse@7000f800 { 32 compatible = "nvidia,tegra20-efuse"; 33 reg = <0x7000f800 0x400>, 34 <0x70000000 0x400>; 35 clocks = <&tegra_car TEGRA20_CLK_FUSE>; 36 clock-names = "fuse"; 37 resets = <&tegra_car 39>; 38 reset-names = "fuse"; 39 }; 40 41 42