1* PTN5150 CC (Configuration Channel) Logic device 2 3PTN5150 is a small thin low power CC logic chip supporting the USB Type-C 4connector application with CC control logic detection and indication functions. 5It is interfaced to the host controller using an I2C interface. 6 7Required properties: 8- compatible: should be "nxp,ptn5150" 9- reg: specifies the I2C slave address of the device 10- int-gpio: should contain a phandle and GPIO specifier for the GPIO pin 11 connected to the PTN5150's INTB pin. 12- vbus-gpio: should contain a phandle and GPIO specifier for the GPIO pin which 13 is used to control VBUS. 14- pinctrl-names : a pinctrl state named "default" must be defined. 15- pinctrl-0 : phandle referencing pin configuration of interrupt and vbus 16 control. 17 18Example: 19 ptn5150@1d { 20 compatible = "nxp,ptn5150"; 21 reg = <0x1d>; 22 int-gpio = <&msmgpio 78 GPIO_ACTIVE_HIGH>; 23 vbus-gpio = <&msmgpio 148 GPIO_ACTIVE_HIGH>; 24 pinctrl-names = "default"; 25 pinctrl-0 = <&ptn5150_default>; 26 status = "okay"; 27 }; 28