1* Mediatek UART APDMA Controller 2 3Required properties: 4- compatible should contain: 5 * "mediatek,mt2712-uart-dma" for MT2712 compatible APDMA 6 * "mediatek,mt6577-uart-dma" for MT6577 and all of the above 7 8- reg: The base address of the APDMA register bank. 9 10- interrupts: A single interrupt specifier. 11 One interrupt per dma-requests, or 8 if no dma-requests property is present 12 13- dma-requests: The number of DMA channels 14 15- clocks : Must contain an entry for each entry in clock-names. 16 See ../clocks/clock-bindings.txt for details. 17- clock-names: The APDMA clock for register accesses 18 19- mediatek,dma-33bits: Present if the DMA requires support 20 21Examples: 22 23 apdma: dma-controller@11000400 { 24 compatible = "mediatek,mt2712-uart-dma", 25 "mediatek,mt6577-uart-dma"; 26 reg = <0 0x11000400 0 0x80>, 27 <0 0x11000480 0 0x80>, 28 <0 0x11000500 0 0x80>, 29 <0 0x11000580 0 0x80>, 30 <0 0x11000600 0 0x80>, 31 <0 0x11000680 0 0x80>, 32 <0 0x11000700 0 0x80>, 33 <0 0x11000780 0 0x80>, 34 <0 0x11000800 0 0x80>, 35 <0 0x11000880 0 0x80>, 36 <0 0x11000900 0 0x80>, 37 <0 0x11000980 0 0x80>; 38 interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_LOW>, 39 <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>, 40 <GIC_SPI 105 IRQ_TYPE_LEVEL_LOW>, 41 <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>, 42 <GIC_SPI 107 IRQ_TYPE_LEVEL_LOW>, 43 <GIC_SPI 108 IRQ_TYPE_LEVEL_LOW>, 44 <GIC_SPI 109 IRQ_TYPE_LEVEL_LOW>, 45 <GIC_SPI 110 IRQ_TYPE_LEVEL_LOW>, 46 <GIC_SPI 111 IRQ_TYPE_LEVEL_LOW>, 47 <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>, 48 <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>, 49 <GIC_SPI 114 IRQ_TYPE_LEVEL_LOW>; 50 dma-requests = <12>; 51 clocks = <&pericfg CLK_PERI_AP_DMA>; 52 clock-names = "apdma"; 53 mediatek,dma-33bits; 54 #dma-cells = <1>; 55 }; 56