1# SPDX-License-Identifier: GPL-2.0 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/display/panel/sitronix,st7789v.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: Sitronix ST7789V RGB panel with SPI control bus 8 9maintainers: 10 - Maxime Ripard <mripard@kernel.org> 11 12allOf: 13 - $ref: panel-common.yaml# 14 - $ref: /schemas/spi/spi-peripheral-props.yaml# 15 16properties: 17 compatible: 18 enum: 19 - edt,et028013dma 20 - inanbo,t28cp45tn89-v17 21 - jasonic,jt240mhqs-hwt-ek-e3 22 - sitronix,st7789v 23 24 reg: true 25 reset-gpios: true 26 power-supply: true 27 backlight: true 28 port: true 29 rotation: true 30 31 spi-cpha: true 32 spi-cpol: true 33 34 spi-rx-bus-width: 35 minimum: 0 36 maximum: 1 37 38 dc-gpios: 39 maxItems: 1 40 description: DCX pin, Display data/command selection pin in parallel interface 41 42required: 43 - compatible 44 - reg 45 - power-supply 46 47unevaluatedProperties: false 48 49examples: 50 - | 51 #include <dt-bindings/gpio/gpio.h> 52 53 spi { 54 #address-cells = <1>; 55 #size-cells = <0>; 56 57 panel@0 { 58 compatible = "sitronix,st7789v"; 59 reg = <0>; 60 reset-gpios = <&pio 6 11 GPIO_ACTIVE_LOW>; 61 backlight = <&pwm_bl>; 62 power-supply = <&power>; 63 rotation = <180>; 64 spi-max-frequency = <100000>; 65 spi-cpol; 66 spi-cpha; 67 68 port { 69 panel_input: endpoint { 70 remote-endpoint = <&tcon0_out_panel>; 71 }; 72 }; 73 }; 74 }; 75 76... 77