1Samsung S6E8AA0 AMOLED LCD 5.3 inch panel 2 3Required properties: 4 - compatible: "samsung,s6e8aa0" 5 - reg: the virtual channel number of a DSI peripheral 6 - vdd3-supply: core voltage supply 7 - vci-supply: voltage supply for analog circuits 8 - reset-gpios: a GPIO spec for the reset pin 9 - display-timings: timings for the connected panel as described by [1] 10 11Optional properties: 12 - power-on-delay: delay after turning regulators on [ms] 13 - reset-delay: delay after reset sequence [ms] 14 - init-delay: delay after initialization sequence [ms] 15 - panel-width-mm: physical panel width [mm] 16 - panel-height-mm: physical panel height [mm] 17 - flip-horizontal: boolean to flip image horizontally 18 - flip-vertical: boolean to flip image vertically 19 20The device node can contain one 'port' child node with one child 21'endpoint' node, according to the bindings defined in [2]. This 22node should describe panel's video bus. 23 24[1]: Documentation/devicetree/bindings/display/panel/display-timing.txt 25[2]: Documentation/devicetree/bindings/media/video-interfaces.txt 26 27Example: 28 29 panel { 30 compatible = "samsung,s6e8aa0"; 31 reg = <0>; 32 vdd3-supply = <&vcclcd_reg>; 33 vci-supply = <&vlcd_reg>; 34 reset-gpios = <&gpy4 5 0>; 35 power-on-delay= <50>; 36 reset-delay = <100>; 37 init-delay = <100>; 38 panel-width-mm = <58>; 39 panel-height-mm = <103>; 40 flip-horizontal; 41 flip-vertical; 42 43 display-timings { 44 timing0: timing-0 { 45 clock-frequency = <57153600>; 46 hactive = <720>; 47 vactive = <1280>; 48 hfront-porch = <5>; 49 hback-porch = <5>; 50 hsync-len = <5>; 51 vfront-porch = <13>; 52 vback-porch = <1>; 53 vsync-len = <2>; 54 }; 55 }; 56 }; 57