xref: /freebsd/sys/contrib/device-tree/Bindings/display/panel/ebbg,ft8719.yaml (revision 5ca8e32633c4ffbbcd6762e5888b6a4ba0708c6c)
1# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/display/panel/ebbg,ft8719.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: EBBG FT8719 MIPI-DSI LCD panel
8
9maintainers:
10  - Joel Selvaraj <jo@jsfamily.in>
11
12description: |
13  The FT8719 panel from EBBG is a FHD+ LCD display panel with a resolution
14  of 1080x2246. It is a video mode DSI panel. The backlight is managed
15  through the QCOM WLED driver.
16
17allOf:
18  - $ref: panel-common.yaml#
19
20properties:
21  compatible:
22    const: ebbg,ft8719
23
24  reg:
25    maxItems: 1
26    description: DSI virtual channel of the peripheral
27
28  vddio-supply:
29    description: power IC supply regulator
30
31  vddpos-supply:
32    description: positive boost supply regulator
33
34  vddneg-supply:
35    description: negative boost supply regulator
36
37required:
38  - compatible
39  - reg
40  - vddio-supply
41  - vddpos-supply
42  - vddneg-supply
43  - reset-gpios
44  - port
45
46unevaluatedProperties: false
47
48examples:
49  - |
50    #include <dt-bindings/gpio/gpio.h>
51
52    dsi {
53      #address-cells = <1>;
54      #size-cells = <0>;
55
56      panel@0 {
57        compatible = "ebbg,ft8719";
58        reg = <0>;
59
60        vddio-supply = <&vreg_l14a_1p88>;
61        vddpos-supply = <&lab>;
62        vddneg-supply = <&ibb>;
63
64        reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
65
66        backlight = <&pmi8998_wled>;
67
68        port {
69          ebbg_ft8719_in_0: endpoint {
70            remote-endpoint = <&dsi0_out>;
71          };
72        };
73      };
74    };
75