xref: /freebsd/sys/contrib/device-tree/Bindings/display/msm/qcom,sm6150-dpu.yaml (revision 2846c90520eb4cc74e24d586a0ea0f4a0006bc73)

# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/msm/qcom,sm6150-dpu.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Qualcomm SM6150 Display DPU

maintainers:
  - Abhinav Kumar <quic_abhinavk@quicinc.com>
  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

$ref: /schemas/display/msm/dpu-common.yaml#

properties:
  compatible:
    const: qcom,sm6150-dpu

  reg:
    items:
      - description: Address offset and size for mdp register set
      - description: Address offset and size for vbif register set

  reg-names:
    items:
      - const: mdp
      - const: vbif

  clocks:
    items:
      - description: Display ahb clock
      - description: Display hf axi clock
      - description: Display core clock
      - description: Display vsync clock

  clock-names:
    items:
      - const: iface
      - const: bus
      - const: core
      - const: vsync

unevaluatedProperties: false

examples:
  - |
    #include <dt-bindings/interrupt-controller/arm-gic.h>
    #include <dt-bindings/power/qcom,rpmhpd.h>

    display-controller@ae01000 {
        compatible = "qcom,sm6150-dpu";
        reg = <0x0ae01000 0x8f000>,
              <0x0aeb0000 0x2008>;
        reg-names = "mdp", "vbif";

        clocks = <&dispcc_mdss_ahb_clk>,
                 <&gcc_disp_hf_axi_clk>,
                 <&dispcc_mdss_mdp_clk>,
                 <&dispcc_mdss_vsync_clk>;
        clock-names = "iface", "bus", "core", "vsync";

        assigned-clocks = <&dispcc_mdss_vsync_clk>;
        assigned-clock-rates = <19200000>;

        operating-points-v2 = <&mdp_opp_table>;
        power-domains = <&rpmhpd RPMHPD_CX>;

        interrupt-parent = <&mdss>;
        interrupts = <0>;

        ports {
            #address-cells = <1>;
            #size-cells = <0>;

            port@0 {
                reg = <0>;
                dpu_intf0_out: endpoint {
                };
            };

            port@1 {
                reg = <1>;
                dpu_intf1_out: endpoint {
                  remote-endpoint = <&mdss_dsi0_in>;
                };
            };
        };

        mdp_opp_table: opp-table {
            compatible = "operating-points-v2";

            opp-19200000 {
              opp-hz = /bits/ 64 <19200000>;
              required-opps = <&rpmhpd_opp_low_svs>;
            };

            opp-25600000 {
              opp-hz = /bits/ 64 <25600000>;
              required-opps = <&rpmhpd_opp_svs>;
            };

            opp-307200000 {
              opp-hz = /bits/ 64 <307200000>;
              required-opps = <&rpmhpd_opp_nom>;
            };
        };
    };
...