1Ilitek ILI9341 display panels 2 3This binding is for display panels using an Ilitek ILI9341 controller in SPI 4mode. 5 6Required properties: 7- compatible: "adafruit,yx240qv29", "ilitek,ili9341" 8- dc-gpios: D/C pin 9- reset-gpios: Reset pin 10 11The node for this driver must be a child node of a SPI controller, hence 12all mandatory properties described in ../spi/spi-bus.txt must be specified. 13 14Optional properties: 15- rotation: panel rotation in degrees counter clockwise (0,90,180,270) 16- backlight: phandle of the backlight device attached to the panel 17 18Example: 19 display@0{ 20 compatible = "adafruit,yx240qv29", "ilitek,ili9341"; 21 reg = <0>; 22 spi-max-frequency = <32000000>; 23 dc-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; 24 reset-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; 25 rotation = <270>; 26 backlight = <&backlight>; 27 }; 28