1*c66ec88fSEmmanuel VadotDVI Connector 2*c66ec88fSEmmanuel Vadot============== 3*c66ec88fSEmmanuel Vadot 4*c66ec88fSEmmanuel VadotRequired properties: 5*c66ec88fSEmmanuel Vadot- compatible: "dvi-connector" 6*c66ec88fSEmmanuel Vadot 7*c66ec88fSEmmanuel VadotOptional properties: 8*c66ec88fSEmmanuel Vadot- label: a symbolic name for the connector 9*c66ec88fSEmmanuel Vadot- ddc-i2c-bus: phandle to the i2c bus that is connected to DVI DDC 10*c66ec88fSEmmanuel Vadot- analog: the connector has DVI analog pins 11*c66ec88fSEmmanuel Vadot- digital: the connector has DVI digital pins 12*c66ec88fSEmmanuel Vadot- dual-link: the connector has pins for DVI dual-link 13*c66ec88fSEmmanuel Vadot- hpd-gpios: HPD GPIO number 14*c66ec88fSEmmanuel Vadot 15*c66ec88fSEmmanuel VadotRequired nodes: 16*c66ec88fSEmmanuel Vadot- Video port for DVI input 17*c66ec88fSEmmanuel Vadot 18*c66ec88fSEmmanuel VadotNote: One (or both) of 'analog' or 'digital' must be set. 19*c66ec88fSEmmanuel Vadot 20*c66ec88fSEmmanuel VadotExample 21*c66ec88fSEmmanuel Vadot------- 22*c66ec88fSEmmanuel Vadot 23*c66ec88fSEmmanuel Vadotdvi0: connector@0 { 24*c66ec88fSEmmanuel Vadot compatible = "dvi-connector"; 25*c66ec88fSEmmanuel Vadot label = "dvi"; 26*c66ec88fSEmmanuel Vadot 27*c66ec88fSEmmanuel Vadot digital; 28*c66ec88fSEmmanuel Vadot 29*c66ec88fSEmmanuel Vadot ddc-i2c-bus = <&i2c3>; 30*c66ec88fSEmmanuel Vadot 31*c66ec88fSEmmanuel Vadot port { 32*c66ec88fSEmmanuel Vadot dvi_connector_in: endpoint { 33*c66ec88fSEmmanuel Vadot remote-endpoint = <&tfp410_out>; 34*c66ec88fSEmmanuel Vadot }; 35*c66ec88fSEmmanuel Vadot }; 36*c66ec88fSEmmanuel Vadot}; 37