1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/display/bridge/toshiba,tc358767.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: Toshiba TC358767/TC358867/TC9595 DSI/DPI/eDP bridge 8 9maintainers: 10 - Andrey Gusakov <andrey.gusakov@cogentembedded.com> 11 12description: | 13 The TC358767/TC358867/TC9595 is bridge device which 14 converts DSI/DPI to eDP/DP . 15 16properties: 17 compatible: 18 oneOf: 19 - items: 20 - enum: 21 - toshiba,tc358867 22 - toshiba,tc9595 23 - const: toshiba,tc358767 24 - const: toshiba,tc358767 25 26 reg: 27 enum: 28 - 0x68 29 - 0x0f 30 description: | 31 i2c address of the bridge, 0x68 or 0x0f, depending on bootstrap pins 32 33 clock-names: 34 const: ref 35 36 clocks: 37 maxItems: 1 38 description: | 39 OF device-tree clock specification for refclk input. The reference. 40 clock rate must be 13 MHz, 19.2 MHz, 26 MHz, or 38.4 MHz. 41 42 shutdown-gpios: 43 maxItems: 1 44 description: | 45 OF device-tree gpio specification for SD pin(active high shutdown input) 46 47 reset-gpios: 48 maxItems: 1 49 description: | 50 OF device-tree gpio specification for RSTX pin(active low system reset) 51 52 toshiba,hpd-pin: 53 $ref: /schemas/types.yaml#/definitions/uint32 54 enum: 55 - 0 56 - 1 57 description: TC358767 GPIO pin number to which HPD is connected to (0 or 1) 58 59 ports: 60 $ref: /schemas/graph.yaml#/properties/ports 61 62 properties: 63 port@0: 64 $ref: /schemas/graph.yaml#/$defs/port-base 65 unevaluatedProperties: false 66 description: | 67 DSI input port. The remote endpoint phandle should be a 68 reference to a valid DSI output endpoint node 69 70 properties: 71 endpoint: 72 $ref: /schemas/media/video-interfaces.yaml# 73 unevaluatedProperties: false 74 75 properties: 76 data-lanes: 77 description: array of physical DSI data lane indexes. 78 minItems: 1 79 items: 80 - const: 1 81 - const: 2 82 - const: 3 83 - const: 4 84 85 port@1: 86 $ref: /schemas/graph.yaml#/properties/port 87 description: | 88 DPI input/output port. The remote endpoint phandle should be a 89 reference to a valid DPI output or input endpoint node. 90 91 port@2: 92 $ref: /schemas/graph.yaml#/properties/port 93 description: | 94 eDP/DP output port. The remote endpoint phandle should be a 95 reference to a valid eDP panel input endpoint node. This port is 96 optional, treated as DP panel if not defined 97 98 oneOf: 99 - required: 100 - port@0 101 - required: 102 - port@1 103 104 105required: 106 - compatible 107 - reg 108 - clock-names 109 - clocks 110 - ports 111 112additionalProperties: false 113 114examples: 115 - | 116 #include <dt-bindings/gpio/gpio.h> 117 118 /* DPI input and eDP output */ 119 120 i2c { 121 #address-cells = <1>; 122 #size-cells = <0>; 123 124 edp-bridge@68 { 125 compatible = "toshiba,tc358767"; 126 reg = <0x68>; 127 shutdown-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; 128 reset-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; 129 clock-names = "ref"; 130 clocks = <&edp_refclk>; 131 132 ports { 133 #address-cells = <1>; 134 #size-cells = <0>; 135 136 port@1 { 137 reg = <1>; 138 139 bridge_in_0: endpoint { 140 remote-endpoint = <&dpi_out>; 141 }; 142 }; 143 144 port@2 { 145 reg = <2>; 146 147 bridge_out: endpoint { 148 remote-endpoint = <&panel_in>; 149 }; 150 }; 151 }; 152 }; 153 }; 154 - | 155 /* DPI input and DP output */ 156 157 i2c { 158 #address-cells = <1>; 159 #size-cells = <0>; 160 161 edp-bridge@68 { 162 compatible = "toshiba,tc358767"; 163 reg = <0x68>; 164 shutdown-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; 165 reset-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; 166 clock-names = "ref"; 167 clocks = <&edp_refclk>; 168 169 ports { 170 #address-cells = <1>; 171 #size-cells = <0>; 172 173 port@1 { 174 reg = <1>; 175 176 bridge_in_1: endpoint { 177 remote-endpoint = <&dpi_out>; 178 }; 179 }; 180 }; 181 }; 182 }; 183