1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/display/bridge/ti,sn65dsi86.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: SN65DSI86 DSI to eDP bridge chip 8 9maintainers: 10 - Sandeep Panda <spanda@codeaurora.org> 11 12description: | 13 The Texas Instruments SN65DSI86 bridge takes MIPI DSI in and outputs eDP. 14 https://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=sn65dsi86&fileType=pdf 15 16properties: 17 compatible: 18 const: ti,sn65dsi86 19 20 reg: 21 enum: [ 0x2c, 0x2d ] 22 23 enable-gpios: 24 maxItems: 1 25 description: GPIO specifier for bridge_en pin (active high). 26 27 suspend-gpios: 28 maxItems: 1 29 description: GPIO specifier for GPIO1 pin on bridge (active low). 30 31 no-hpd: 32 type: boolean 33 description: 34 Set if the HPD line on the bridge isn't hooked up to anything or is 35 otherwise unusable. 36 37 vccio-supply: 38 description: A 1.8V supply that powers the digital IOs. 39 40 vpll-supply: 41 description: A 1.8V supply that powers the DisplayPort PLL. 42 43 vcca-supply: 44 description: A 1.2V supply that powers the analog circuits. 45 46 vcc-supply: 47 description: A 1.2V supply that powers the digital core. 48 49 interrupts: 50 maxItems: 1 51 52 clocks: 53 maxItems: 1 54 description: 55 Clock specifier for input reference clock. The reference clock rate must 56 be 12 MHz, 19.2 MHz, 26 MHz, 27 MHz or 38.4 MHz. 57 58 clock-names: 59 const: refclk 60 61 gpio-controller: true 62 '#gpio-cells': 63 const: 2 64 description: 65 First cell is pin number, second cell is flags. GPIO pin numbers are 66 1-based to match the datasheet. See ../../gpio/gpio.txt for more 67 information. 68 69 '#pwm-cells': 70 const: 1 71 description: See ../../pwm/pwm.yaml for description of the cell formats. 72 73 aux-bus: 74 $ref: /schemas/display/dp-aux-bus.yaml# 75 76 ports: 77 $ref: /schemas/graph.yaml#/properties/ports 78 79 properties: 80 port@0: 81 $ref: /schemas/graph.yaml#/properties/port 82 description: 83 Video port for MIPI DSI input 84 85 port@1: 86 $ref: /schemas/graph.yaml#/$defs/port-base 87 unevaluatedProperties: false 88 description: 89 Video port for eDP output (panel or connector). 90 91 properties: 92 endpoint: 93 $ref: /schemas/graph.yaml#/$defs/endpoint-base 94 unevaluatedProperties: false 95 96 properties: 97 data-lanes: 98 oneOf: 99 - minItems: 1 100 maxItems: 1 101 uniqueItems: true 102 items: 103 enum: 104 - 0 105 - 1 106 description: 107 If you have 1 logical lane the bridge supports routing 108 to either port 0 or port 1. Port 0 is suggested. 109 See ../../media/video-interface.txt for details. 110 111 - minItems: 2 112 maxItems: 2 113 uniqueItems: true 114 items: 115 enum: 116 - 0 117 - 1 118 description: 119 If you have 2 logical lanes the bridge supports 120 reordering but only on physical ports 0 and 1. 121 See ../../media/video-interface.txt for details. 122 123 - minItems: 4 124 maxItems: 4 125 uniqueItems: true 126 items: 127 enum: 128 - 0 129 - 1 130 - 2 131 - 3 132 description: 133 If you have 4 logical lanes the bridge supports 134 reordering in any way. 135 See ../../media/video-interface.txt for details. 136 137 lane-polarities: 138 minItems: 1 139 maxItems: 4 140 items: 141 enum: 142 - 0 143 - 1 144 description: See ../../media/video-interface.txt 145 146 dependencies: 147 lane-polarities: [data-lanes] 148 149 required: 150 - port@0 151 - port@1 152 153required: 154 - compatible 155 - reg 156 - vccio-supply 157 - vpll-supply 158 - vcca-supply 159 - vcc-supply 160 - ports 161 162additionalProperties: false 163 164examples: 165 - | 166 #include <dt-bindings/clock/qcom,rpmh.h> 167 #include <dt-bindings/gpio/gpio.h> 168 #include <dt-bindings/interrupt-controller/irq.h> 169 170 i2c { 171 #address-cells = <1>; 172 #size-cells = <0>; 173 174 bridge@2d { 175 compatible = "ti,sn65dsi86"; 176 reg = <0x2d>; 177 178 interrupt-parent = <&tlmm>; 179 interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; 180 181 enable-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>; 182 183 vpll-supply = <&src_pp1800_s4a>; 184 vccio-supply = <&src_pp1800_s4a>; 185 vcca-supply = <&src_pp1200_l2a>; 186 vcc-supply = <&src_pp1200_l2a>; 187 188 clocks = <&rpmhcc RPMH_LN_BB_CLK2>; 189 clock-names = "refclk"; 190 191 no-hpd; 192 193 ports { 194 #address-cells = <1>; 195 #size-cells = <0>; 196 197 port@0 { 198 reg = <0>; 199 endpoint { 200 remote-endpoint = <&dsi0_out>; 201 }; 202 }; 203 204 port@1 { 205 reg = <1>; 206 sn65dsi86_out: endpoint { 207 remote-endpoint = <&panel_in_edp>; 208 }; 209 }; 210 }; 211 212 aux-bus { 213 panel { 214 compatible = "boe,nv133fhm-n62"; 215 power-supply = <&pp3300_dx_edp>; 216 backlight = <&backlight>; 217 hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>; 218 219 port { 220 panel_in_edp: endpoint { 221 remote-endpoint = <&sn65dsi86_out>; 222 }; 223 }; 224 }; 225 }; 226 }; 227 }; 228 - | 229 #include <dt-bindings/clock/qcom,rpmh.h> 230 #include <dt-bindings/gpio/gpio.h> 231 #include <dt-bindings/interrupt-controller/irq.h> 232 233 i2c { 234 #address-cells = <1>; 235 #size-cells = <0>; 236 237 bridge@2d { 238 compatible = "ti,sn65dsi86"; 239 reg = <0x2d>; 240 241 enable-gpios = <&msmgpio 33 GPIO_ACTIVE_HIGH>; 242 suspend-gpios = <&msmgpio 34 GPIO_ACTIVE_LOW>; 243 244 interrupts-extended = <&gpio3 4 IRQ_TYPE_EDGE_FALLING>; 245 246 vccio-supply = <&pm8916_l17>; 247 vcca-supply = <&pm8916_l6>; 248 vpll-supply = <&pm8916_l17>; 249 vcc-supply = <&pm8916_l6>; 250 251 clock-names = "refclk"; 252 clocks = <&input_refclk>; 253 254 ports { 255 #address-cells = <1>; 256 #size-cells = <0>; 257 258 port@0 { 259 reg = <0>; 260 261 edp_bridge_in: endpoint { 262 remote-endpoint = <&dsi_out>; 263 }; 264 }; 265 266 port@1 { 267 reg = <1>; 268 269 edp_bridge_out: endpoint { 270 data-lanes = <2 1 3 0>; 271 lane-polarities = <0 1 0 1>; 272 remote-endpoint = <&edp_panel_in>; 273 }; 274 }; 275 }; 276 }; 277 }; 278