1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/display/bridge/ti,sn65dsi86.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: SN65DSI86 DSI to eDP bridge chip 8 9maintainers: 10 - Sandeep Panda <spanda@codeaurora.org> 11 12description: | 13 The Texas Instruments SN65DSI86 bridge takes MIPI DSI in and outputs eDP. 14 https://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=sn65dsi86&fileType=pdf 15 16properties: 17 compatible: 18 const: ti,sn65dsi86 19 20 reg: 21 enum: [ 0x2c, 0x2d ] 22 23 enable-gpios: 24 maxItems: 1 25 description: GPIO specifier for bridge_en pin (active high). 26 27 suspend-gpios: 28 maxItems: 1 29 description: GPIO specifier for GPIO1 pin on bridge (active low). 30 31 no-hpd: 32 type: boolean 33 description: 34 Set if the HPD line on the bridge isn't hooked up to anything or is 35 otherwise unusable. 36 37 vccio-supply: 38 description: A 1.8V supply that powers the digital IOs. 39 40 vpll-supply: 41 description: A 1.8V supply that powers the DisplayPort PLL. 42 43 vcca-supply: 44 description: A 1.2V supply that powers the analog circuits. 45 46 vcc-supply: 47 description: A 1.2V supply that powers the digital core. 48 49 interrupts: 50 maxItems: 1 51 52 clocks: 53 maxItems: 1 54 description: 55 Clock specifier for input reference clock. The reference clock rate must 56 be 12 MHz, 19.2 MHz, 26 MHz, 27 MHz or 38.4 MHz. 57 58 clock-names: 59 const: refclk 60 61 gpio-controller: true 62 '#gpio-cells': 63 const: 2 64 description: 65 First cell is pin number, second cell is flags. GPIO pin numbers are 66 1-based to match the datasheet. See ../../gpio/gpio.txt for more 67 information. 68 69 '#pwm-cells': 70 const: 1 71 description: See ../../pwm/pwm.yaml for description of the cell formats. 72 73 aux-bus: 74 $ref: /schemas/display/dp-aux-bus.yaml# 75 76 ports: 77 $ref: /schemas/graph.yaml#/properties/ports 78 79 properties: 80 port@0: 81 $ref: /schemas/graph.yaml#/properties/port 82 description: 83 Video port for MIPI DSI input 84 85 port@1: 86 $ref: /schemas/graph.yaml#/$defs/port-base 87 unevaluatedProperties: false 88 description: 89 Video port for eDP output (panel or connector). 90 91 properties: 92 endpoint: 93 $ref: /schemas/media/video-interfaces.yaml# 94 unevaluatedProperties: false 95 96 properties: 97 data-lanes: 98 oneOf: 99 - minItems: 1 100 maxItems: 1 101 uniqueItems: true 102 items: 103 enum: 104 - 0 105 - 1 106 description: 107 If you have 1 logical lane the bridge supports routing 108 to either port 0 or port 1. Port 0 is suggested. 109 110 - minItems: 2 111 maxItems: 2 112 uniqueItems: true 113 items: 114 enum: 115 - 0 116 - 1 117 description: 118 If you have 2 logical lanes the bridge supports 119 reordering but only on physical ports 0 and 1. 120 121 - minItems: 4 122 maxItems: 4 123 uniqueItems: true 124 items: 125 enum: 126 - 0 127 - 1 128 - 2 129 - 3 130 description: 131 If you have 4 logical lanes the bridge supports 132 reordering in any way. 133 134 lane-polarities: 135 minItems: 1 136 maxItems: 4 137 items: 138 enum: 139 - 0 140 - 1 141 142 dependencies: 143 lane-polarities: [data-lanes] 144 145 required: 146 - port@0 147 - port@1 148 149required: 150 - compatible 151 - reg 152 - vccio-supply 153 - vpll-supply 154 - vcca-supply 155 - vcc-supply 156 - ports 157 158additionalProperties: false 159 160examples: 161 - | 162 #include <dt-bindings/clock/qcom,rpmh.h> 163 #include <dt-bindings/gpio/gpio.h> 164 #include <dt-bindings/interrupt-controller/irq.h> 165 166 i2c { 167 #address-cells = <1>; 168 #size-cells = <0>; 169 170 bridge@2d { 171 compatible = "ti,sn65dsi86"; 172 reg = <0x2d>; 173 174 interrupt-parent = <&tlmm>; 175 interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; 176 177 enable-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>; 178 179 vpll-supply = <&src_pp1800_s4a>; 180 vccio-supply = <&src_pp1800_s4a>; 181 vcca-supply = <&src_pp1200_l2a>; 182 vcc-supply = <&src_pp1200_l2a>; 183 184 clocks = <&rpmhcc RPMH_LN_BB_CLK2>; 185 clock-names = "refclk"; 186 187 no-hpd; 188 189 ports { 190 #address-cells = <1>; 191 #size-cells = <0>; 192 193 port@0 { 194 reg = <0>; 195 endpoint { 196 remote-endpoint = <&dsi0_out>; 197 }; 198 }; 199 200 port@1 { 201 reg = <1>; 202 sn65dsi86_out: endpoint { 203 remote-endpoint = <&panel_in_edp>; 204 }; 205 }; 206 }; 207 208 aux-bus { 209 panel { 210 compatible = "boe,nv133fhm-n62"; 211 power-supply = <&pp3300_dx_edp>; 212 backlight = <&backlight>; 213 hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>; 214 215 port { 216 panel_in_edp: endpoint { 217 remote-endpoint = <&sn65dsi86_out>; 218 }; 219 }; 220 }; 221 }; 222 }; 223 }; 224 - | 225 #include <dt-bindings/clock/qcom,rpmh.h> 226 #include <dt-bindings/gpio/gpio.h> 227 #include <dt-bindings/interrupt-controller/irq.h> 228 229 i2c { 230 #address-cells = <1>; 231 #size-cells = <0>; 232 233 bridge@2d { 234 compatible = "ti,sn65dsi86"; 235 reg = <0x2d>; 236 237 enable-gpios = <&msmgpio 33 GPIO_ACTIVE_HIGH>; 238 suspend-gpios = <&msmgpio 34 GPIO_ACTIVE_LOW>; 239 240 interrupts-extended = <&gpio3 4 IRQ_TYPE_EDGE_FALLING>; 241 242 vccio-supply = <&pm8916_l17>; 243 vcca-supply = <&pm8916_l6>; 244 vpll-supply = <&pm8916_l17>; 245 vcc-supply = <&pm8916_l6>; 246 247 clock-names = "refclk"; 248 clocks = <&input_refclk>; 249 250 ports { 251 #address-cells = <1>; 252 #size-cells = <0>; 253 254 port@0 { 255 reg = <0>; 256 257 edp_bridge_in: endpoint { 258 remote-endpoint = <&dsi_out>; 259 }; 260 }; 261 262 port@1 { 263 reg = <1>; 264 265 edp_bridge_out: endpoint { 266 data-lanes = <2 1 3 0>; 267 lane-polarities = <0 1 0 1>; 268 remote-endpoint = <&edp_panel_in>; 269 }; 270 }; 271 }; 272 }; 273 }; 274