xref: /freebsd/sys/contrib/device-tree/Bindings/display/bridge/thine,thc63lvd1024.yaml (revision 43a5ec4eb41567cc92586503212743d89686d78f) 
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/display/bridge/thine,thc63lvd1024.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Thine Electronics THC63LVD1024 LVDS Decoder
8
9maintainers:
10  - Jacopo Mondi <jacopo+renesas@jmondi.org>
11  - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
12
13description: |
14  The THC63LVD1024 is a dual link LVDS receiver designed to convert LVDS
15  streams to parallel data outputs. The chip supports single/dual input/output
16  modes, handling up to two LVDS input streams and up to two digital CMOS/TTL
17  outputs.
18
19  Single or dual operation mode, output data mapping and DDR output modes are
20  configured through input signals and the chip does not expose any control
21  bus.
22
23properties:
24  compatible:
25    const: thine,thc63lvd1024
26
27  ports:
28    $ref: /schemas/graph.yaml#/properties/ports
29    description: |
30      The device can operate in single or dual input and output modes.
31
32      When operating in single input mode, all pixels are received on port@0,
33      and port@1 shall not contain any endpoint. In dual input mode,
34      even-numbered pixels are received on port@0 and odd-numbered pixels on
35      port@1, and both port@0 and port@1 shall contain endpoints.
36
37      When operating in single output mode all pixels are output from the first
38      CMOS/TTL port and port@3 shall not contain any endpoint. In dual output
39      mode pixels are output from both CMOS/TTL ports and both port@2 and
40      port@3 shall contain endpoints.
41
42    properties:
43      port@0:
44        $ref: /schemas/graph.yaml#/properties/port
45        description: First LVDS input port
46
47      port@1:
48        $ref: /schemas/graph.yaml#/properties/port
49        description: Second LVDS input port
50
51      port@2:
52        $ref: /schemas/graph.yaml#/properties/port
53        description: First digital CMOS/TTL parallel output
54
55      port@3:
56        $ref: /schemas/graph.yaml#/properties/port
57        description: Second digital CMOS/TTL parallel output
58
59    required:
60      - port@0
61      - port@2
62
63  oe-gpios:
64    maxItems: 1
65    description: Output enable GPIO signal, pin name "OE", active high.
66
67  powerdown-gpios:
68    maxItems: 1
69    description: Power down GPIO signal, pin name "/PDWN", active low.
70
71  vcc-supply:
72    description:
73      Power supply for the TTL output, TTL CLOCKOUT signal, LVDS input, PLL and
74      digital circuitry.
75
76required:
77  - compatible
78  - ports
79  - vcc-supply
80
81additionalProperties: false
82
83examples:
84  - |
85    #include <dt-bindings/gpio/gpio.h>
86
87    lvds-decoder {
88        compatible = "thine,thc63lvd1024";
89
90        vcc-supply = <&reg_lvds_vcc>;
91        powerdown-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
92
93        ports {
94            #address-cells = <1>;
95            #size-cells = <0>;
96
97            port@0 {
98                reg = <0>;
99
100                lvds_dec_in_0: endpoint {
101                    remote-endpoint = <&lvds_out>;
102                };
103            };
104
105            port@2 {
106                reg = <2>;
107
108                lvds_dec_out_2: endpoint {
109                    remote-endpoint = <&adv7511_in>;
110                };
111            };
112        };
113    };
114
115...
116