1ptn3460 bridge bindings 2 3Required properties: 4 - compatible: "nxp,ptn3460" 5 - reg: i2c address of the bridge 6 - powerdown-gpio: OF device-tree gpio specification for PD_N pin. 7 - reset-gpio: OF device-tree gpio specification for RST_N pin. 8 - edid-emulation: The EDID emulation entry to use 9 +-------+------------+------------------+ 10 | Value | Resolution | Description | 11 | 0 | 1024x768 | NXP Generic | 12 | 1 | 1920x1080 | NXP Generic | 13 | 2 | 1920x1080 | NXP Generic | 14 | 3 | 1600x900 | Samsung LTM200KT | 15 | 4 | 1920x1080 | Samsung LTM230HT | 16 | 5 | 1366x768 | NXP Generic | 17 | 6 | 1600x900 | ChiMei M215HGE | 18 +-------+------------+------------------+ 19 20 - video interfaces: Device node can contain video interface port 21 nodes for panel according to [1]. 22 23[1]: Documentation/devicetree/bindings/media/video-interfaces.txt 24 25Example: 26 lvds-bridge@20 { 27 compatible = "nxp,ptn3460"; 28 reg = <0x20>; 29 powerdown-gpio = <&gpy2 5 1 0 0>; 30 reset-gpio = <&gpx1 5 1 0 0>; 31 edid-emulation = <5>; 32 ports { 33 port@0 { 34 bridge_out: endpoint { 35 remote-endpoint = <&panel_in>; 36 }; 37 }; 38 }; 39 }; 40