1SEC 6 is as Freescale's Cryptographic Accelerator and Assurance Module (CAAM). 2Currently Freescale powerpc chip C29X is embedded with SEC 6. 3SEC 6 device tree binding include: 4 -SEC 6 Node 5 -Job Ring Node 6 -Full Example 7 8===================================================================== 9SEC 6 Node 10 11Description 12 13 Node defines the base address of the SEC 6 block. 14 This block specifies the address range of all global 15 configuration registers for the SEC 6 block. 16 For example, In C293, we could see three SEC 6 node. 17 18PROPERTIES 19 20 - compatible 21 Usage: required 22 Value type: <string> 23 Definition: Must include "fsl,sec-v6.0". 24 25 - fsl,sec-era 26 Usage: optional 27 Value type: <u32> 28 Definition: A standard property. Define the 'ERA' of the SEC 29 device. 30 31 - #address-cells 32 Usage: required 33 Value type: <u32> 34 Definition: A standard property. Defines the number of cells 35 for representing physical addresses in child nodes. 36 37 - #size-cells 38 Usage: required 39 Value type: <u32> 40 Definition: A standard property. Defines the number of cells 41 for representing the size of physical addresses in 42 child nodes. 43 44 - reg 45 Usage: required 46 Value type: <prop-encoded-array> 47 Definition: A standard property. Specifies the physical 48 address and length of the SEC 6 configuration registers. 49 50 - ranges 51 Usage: required 52 Value type: <prop-encoded-array> 53 Definition: A standard property. Specifies the physical address 54 range of the SEC 6.0 register space (-SNVS not included). A 55 triplet that includes the child address, parent address, & 56 length. 57 58 Note: All other standard properties (see the Devicetree Specification) 59 are allowed but are optional. 60 61EXAMPLE 62 crypto@a0000 { 63 compatible = "fsl,sec-v6.0"; 64 fsl,sec-era = <6>; 65 #address-cells = <1>; 66 #size-cells = <1>; 67 reg = <0xa0000 0x20000>; 68 ranges = <0 0xa0000 0x20000>; 69 }; 70 71===================================================================== 72Job Ring (JR) Node 73 74 Child of the crypto node defines data processing interface to SEC 6 75 across the peripheral bus for purposes of processing 76 cryptographic descriptors. The specified address 77 range can be made visible to one (or more) cores. 78 The interrupt defined for this node is controlled within 79 the address range of this node. 80 81 - compatible 82 Usage: required 83 Value type: <string> 84 Definition: Must include "fsl,sec-v6.0-job-ring". 85 86 - reg 87 Usage: required 88 Value type: <prop-encoded-array> 89 Definition: Specifies a two JR parameters: an offset from 90 the parent physical address and the length the JR registers. 91 92 - interrupts 93 Usage: required 94 Value type: <prop_encoded-array> 95 Definition: Specifies the interrupts generated by this 96 device. The value of the interrupts property 97 consists of one interrupt specifier. The format 98 of the specifier is defined by the binding document 99 describing the node's interrupt parent. 100 101EXAMPLE 102 jr@1000 { 103 compatible = "fsl,sec-v6.0-job-ring"; 104 reg = <0x1000 0x1000>; 105 interrupts = <49 2 0 0>; 106 }; 107 108=================================================================== 109Full Example 110 111Since some chips may contain more than one SEC, the dtsi contains 112only the node contents, not the node itself. A chip using the SEC 113should include the dtsi inside each SEC node. Example: 114 115In qoriq-sec6.0.dtsi: 116 117 compatible = "fsl,sec-v6.0"; 118 fsl,sec-era = <6>; 119 #address-cells = <1>; 120 #size-cells = <1>; 121 122 jr@1000 { 123 compatible = "fsl,sec-v6.0-job-ring", 124 "fsl,sec-v5.2-job-ring", 125 "fsl,sec-v5.0-job-ring", 126 "fsl,sec-v4.4-job-ring", 127 "fsl,sec-v4.0-job-ring"; 128 reg = <0x1000 0x1000>; 129 }; 130 131 jr@2000 { 132 compatible = "fsl,sec-v6.0-job-ring", 133 "fsl,sec-v5.2-job-ring", 134 "fsl,sec-v5.0-job-ring", 135 "fsl,sec-v4.4-job-ring", 136 "fsl,sec-v4.0-job-ring"; 137 reg = <0x2000 0x1000>; 138 }; 139 140In the C293 device tree, we add the include of public property: 141 142 crypto@a0000 { 143 /include/ "qoriq-sec6.0.dtsi" 144 } 145 146 crypto@a0000 { 147 reg = <0xa0000 0x20000>; 148 ranges = <0 0xa0000 0x20000>; 149 150 jr@1000 { 151 interrupts = <49 2 0 0>; 152 }; 153 154 jr@2000 { 155 interrupts = <50 2 0 0>; 156 }; 157 }; 158