1Broadcom AVS mail box and interrupt register bindings 2===================================================== 3 4A total of three DT nodes are required. One node (brcm,avs-cpu-data-mem) 5references the mailbox register used to communicate with the AVS CPU[1]. The 6second node (brcm,avs-cpu-l2-intr) is required to trigger an interrupt on 7the AVS CPU. The interrupt tells the AVS CPU that it needs to process a 8command sent to it by a driver. Interrupting the AVS CPU is mandatory for 9commands to be processed. 10 11The interface also requires a reference to the AVS host interrupt controller, 12so a driver can react to interrupts generated by the AVS CPU whenever a command 13has been processed. See [2] for more information on the brcm,l2-intc node. 14 15[1] The AVS CPU is an independent co-processor that runs proprietary 16firmware. On some SoCs, this firmware supports DFS and DVFS in addition to 17Adaptive Voltage Scaling. 18 19[2] Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt 20 21 22Node brcm,avs-cpu-data-mem 23-------------------------- 24 25Required properties: 26- compatible: must include: brcm,avs-cpu-data-mem and 27 should include: one of brcm,bcm7271-avs-cpu-data-mem or 28 brcm,bcm7268-avs-cpu-data-mem 29- reg: Specifies base physical address and size of the registers. 30- interrupts: The interrupt that the AVS CPU will use to interrupt the host 31 when a command completed. 32- interrupt-names: The name of the interrupt used to interrupt the host. 33 34Optional properties: 35- None 36 37Node brcm,avs-cpu-l2-intr 38------------------------- 39 40Required properties: 41- compatible: must include: brcm,avs-cpu-l2-intr and 42 should include: one of brcm,bcm7271-avs-cpu-l2-intr or 43 brcm,bcm7268-avs-cpu-l2-intr 44- reg: Specifies base physical address and size of the registers. 45 46Optional properties: 47- None 48 49 50Example 51======= 52 53 avs_host_l2_intc: interrupt-controller@f04d1200 { 54 #interrupt-cells = <1>; 55 compatible = "brcm,l2-intc"; 56 interrupt-parent = <&intc>; 57 reg = <0xf04d1200 0x48>; 58 interrupt-controller; 59 interrupts = <0x0 0x19 0x0>; 60 interrupt-names = "avs"; 61 }; 62 63 avs-cpu-data-mem@f04c4000 { 64 compatible = "brcm,bcm7271-avs-cpu-data-mem", 65 "brcm,avs-cpu-data-mem"; 66 reg = <0xf04c4000 0x60>; 67 interrupts = <0x1a>; 68 interrupt-parent = <&avs_host_l2_intc>; 69 interrupt-names = "sw_intr"; 70 }; 71 72 avs-cpu-l2-intr@f04d1100 { 73 compatible = "brcm,bcm7271-avs-cpu-l2-intr", 74 "brcm,avs-cpu-l2-intr"; 75 reg = <0xf04d1100 0x10>; 76 }; 77