1Bindings for Texas Instruments CDCE706 programmable 3-PLL clock 2synthesizer/multiplier/divider. 3 4Reference: https://www.ti.com/lit/ds/symlink/cdce706.pdf 5 6I2C device node required properties: 7- compatible: shall be "ti,cdce706". 8- reg: i2c device address, shall be in range [0x68...0x6b]. 9- #clock-cells: from common clock binding; shall be set to 1. 10- clocks: from common clock binding; list of parent clock 11 handles, shall be reference clock(s) connected to CLK_IN0 12 and CLK_IN1 pins. 13- clock-names: shall be clk_in0 and/or clk_in1. Use clk_in0 14 in case of crystal oscillator or differential signal input 15 configuration. Use clk_in0 and clk_in1 in case of independent 16 single-ended LVCMOS inputs configuration. 17 18Example: 19 20 clocks { 21 clk54: clk54 { 22 #clock-cells = <0>; 23 compatible = "fixed-clock"; 24 clock-frequency = <54000000>; 25 }; 26 }; 27 ... 28 i2c0: i2c-master@d090000 { 29 ... 30 cdce706: clock-synth@69 { 31 compatible = "ti,cdce706"; 32 #clock-cells = <1>; 33 reg = <0x69>; 34 clocks = <&clk54>; 35 clock-names = "clk_in0"; 36 }; 37 }; 38 ... 39 simple-audio-card,codec { 40 ... 41 clocks = <&cdce706 4>; 42 }; 43