xref: /freebsd/sys/contrib/device-tree/Bindings/clock/samsung,exynos7885-clock.yaml (revision e6bfd18d21b225af6a0ed67ceeaf1293b7b9eba5)
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/clock/samsung,exynos7885-clock.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Samsung Exynos7885 SoC clock controller
8
9maintainers:
10  - Dávid Virág <virag.david003@gmail.com>
11  - Chanwoo Choi <cw00.choi@samsung.com>
12  - Krzysztof Kozlowski <krzk@kernel.org>
13  - Sylwester Nawrocki <s.nawrocki@samsung.com>
14  - Tomasz Figa <tomasz.figa@gmail.com>
15
16description: |
17  Exynos7885 clock controller is comprised of several CMU units, generating
18  clocks for different domains. Those CMU units are modeled as separate device
19  tree nodes, and might depend on each other. The root clock in that root tree
20  is an external clock: OSCCLK (26 MHz). This external clock must be defined
21  as a fixed-rate clock in dts.
22
23  CMU_TOP is a top-level CMU, where all base clocks are prepared using PLLs and
24  dividers; all other leaf clocks (other CMUs) are usually derived from CMU_TOP.
25
26  Each clock is assigned an identifier and client nodes can use this identifier
27  to specify the clock which they consume. All clocks available for usage
28  in clock consumer nodes are defined as preprocessor macros in
29  'dt-bindings/clock/exynos7885.h' header.
30
31properties:
32  compatible:
33    enum:
34      - samsung,exynos7885-cmu-top
35      - samsung,exynos7885-cmu-core
36      - samsung,exynos7885-cmu-fsys
37      - samsung,exynos7885-cmu-peri
38
39  clocks:
40    minItems: 1
41    maxItems: 10
42
43  clock-names:
44    minItems: 1
45    maxItems: 10
46
47  "#clock-cells":
48    const: 1
49
50  reg:
51    maxItems: 1
52
53allOf:
54  - if:
55      properties:
56        compatible:
57          contains:
58            const: samsung,exynos7885-cmu-top
59
60    then:
61      properties:
62        clocks:
63          items:
64            - description: External reference clock (26 MHz)
65
66        clock-names:
67          items:
68            - const: oscclk
69
70  - if:
71      properties:
72        compatible:
73          contains:
74            const: samsung,exynos7885-cmu-core
75
76    then:
77      properties:
78        clocks:
79          items:
80            - description: External reference clock (26 MHz)
81            - description: CMU_CORE bus clock (from CMU_TOP)
82            - description: CCI clock (from CMU_TOP)
83            - description: G3D clock (from CMU_TOP)
84
85        clock-names:
86          items:
87            - const: oscclk
88            - const: dout_core_bus
89            - const: dout_core_cci
90            - const: dout_core_g3d
91
92  - if:
93      properties:
94        compatible:
95          contains:
96            const: samsung,exynos7885-cmu-fsys
97
98    then:
99      properties:
100        clocks:
101          items:
102            - description: External reference clock (26 MHz)
103            - description: CMU_FSYS bus clock (from CMU_TOP)
104            - description: MMC_CARD clock (from CMU_TOP)
105            - description: MMC_EMBD clock (from CMU_TOP)
106            - description: MMC_SDIO clock (from CMU_TOP)
107            - description: USB30DRD clock (from CMU_TOP)
108
109        clock-names:
110          items:
111            - const: oscclk
112            - const: dout_fsys_bus
113            - const: dout_fsys_mmc_card
114            - const: dout_fsys_mmc_embd
115            - const: dout_fsys_mmc_sdio
116            - const: dout_fsys_usb30drd
117
118  - if:
119      properties:
120        compatible:
121          contains:
122            const: samsung,exynos7885-cmu-peri
123
124    then:
125      properties:
126        clocks:
127          items:
128            - description: External reference clock (26 MHz)
129            - description: CMU_PERI bus clock (from CMU_TOP)
130            - description: SPI0 clock (from CMU_TOP)
131            - description: SPI1 clock (from CMU_TOP)
132            - description: UART0 clock (from CMU_TOP)
133            - description: UART1 clock (from CMU_TOP)
134            - description: UART2 clock (from CMU_TOP)
135            - description: USI0 clock (from CMU_TOP)
136            - description: USI1 clock (from CMU_TOP)
137            - description: USI2 clock (from CMU_TOP)
138
139        clock-names:
140          items:
141            - const: oscclk
142            - const: dout_peri_bus
143            - const: dout_peri_spi0
144            - const: dout_peri_spi1
145            - const: dout_peri_uart0
146            - const: dout_peri_uart1
147            - const: dout_peri_uart2
148            - const: dout_peri_usi0
149            - const: dout_peri_usi1
150            - const: dout_peri_usi2
151
152required:
153  - compatible
154  - "#clock-cells"
155  - clocks
156  - clock-names
157  - reg
158
159additionalProperties: false
160
161examples:
162  # Clock controller node for CMU_PERI
163  - |
164    #include <dt-bindings/clock/exynos7885.h>
165
166    cmu_peri: clock-controller@10010000 {
167        compatible = "samsung,exynos7885-cmu-peri";
168        reg = <0x10010000 0x8000>;
169        #clock-cells = <1>;
170
171        clocks = <&oscclk>,
172                 <&cmu_top CLK_DOUT_PERI_BUS>,
173                 <&cmu_top CLK_DOUT_PERI_SPI0>,
174                 <&cmu_top CLK_DOUT_PERI_SPI1>,
175                 <&cmu_top CLK_DOUT_PERI_UART0>,
176                 <&cmu_top CLK_DOUT_PERI_UART1>,
177                 <&cmu_top CLK_DOUT_PERI_UART2>,
178                 <&cmu_top CLK_DOUT_PERI_USI0>,
179                 <&cmu_top CLK_DOUT_PERI_USI1>,
180                 <&cmu_top CLK_DOUT_PERI_USI2>;
181        clock-names = "oscclk",
182                      "dout_peri_bus",
183                      "dout_peri_spi0",
184                      "dout_peri_spi1",
185                      "dout_peri_uart0",
186                      "dout_peri_uart1",
187                      "dout_peri_uart2",
188                      "dout_peri_usi0",
189                      "dout_peri_usi1",
190                      "dout_peri_usi2";
191    };
192
193...
194