xref: /freebsd/sys/contrib/device-tree/Bindings/clock/renesas,rzg2l-cpg.yaml (revision fac71e4e09885bb2afa3d984a0c239a52e1a7418) 
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/clock/renesas,rzg2l-cpg.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Renesas RZ/{G2L,V2L,V2M} Clock Pulse Generator / Module Standby Mode
8
9maintainers:
10  - Geert Uytterhoeven <geert+renesas@glider.be>
11
12description: |
13  On Renesas RZ/{G2L,V2L}-alike SoC's, the CPG (Clock Pulse Generator) and Module
14  Standby Mode share the same register block. On RZ/V2M, the functionality is
15  similar, but does not have Clock Monitor Registers.
16
17  They provide the following functionalities:
18    - The CPG block generates various core clocks,
19    - The Module Standby Mode block provides two functions:
20        1. Module Standby, providing a Clock Domain to control the clock supply
21           to individual SoC devices,
22        2. Reset Control, to perform a software reset of individual SoC devices.
23
24properties:
25  compatible:
26    enum:
27      - renesas,r9a07g043-cpg # RZ/G2UL{Type-1,Type-2} and RZ/Five
28      - renesas,r9a07g044-cpg # RZ/G2{L,LC}
29      - renesas,r9a07g054-cpg # RZ/V2L
30      - renesas,r9a09g011-cpg # RZ/V2M
31
32  reg:
33    maxItems: 1
34
35  clocks:
36    maxItems: 1
37
38  clock-names:
39    description:
40      Clock source to CPG can be either from external clock input (EXCLK) or
41      crystal oscillator (XIN/XOUT).
42    const: extal
43
44  '#clock-cells':
45    description: |
46      - For CPG core clocks, the two clock specifier cells must be "CPG_CORE"
47        and a core clock reference, as defined in
48        <dt-bindings/clock/r9a0*-cpg.h>,
49      - For module clocks, the two clock specifier cells must be "CPG_MOD" and
50        a module number, as defined in <dt-bindings/clock/r9a0*-cpg.h>.
51    const: 2
52
53  '#power-domain-cells':
54    description:
55      SoC devices that are part of the CPG/Module Standby Mode Clock Domain and
56      can be power-managed through Module Standby should refer to the CPG device
57      node in their "power-domains" property, as documented by the generic PM
58      Domain bindings in Documentation/devicetree/bindings/power/power-domain.yaml.
59    const: 0
60
61  '#reset-cells':
62    description:
63      The single reset specifier cell must be the module number, as defined in
64      <dt-bindings/clock/r9a0*-cpg.h>.
65    const: 1
66
67required:
68  - compatible
69  - reg
70  - clocks
71  - clock-names
72  - '#clock-cells'
73  - '#power-domain-cells'
74  - '#reset-cells'
75
76additionalProperties: false
77
78examples:
79  - |
80    cpg: clock-controller@11010000 {
81            compatible = "renesas,r9a07g044-cpg";
82            reg = <0x11010000 0x10000>;
83            clocks = <&extal_clk>;
84            clock-names = "extal";
85            #clock-cells = <2>;
86            #power-domain-cells = <0>;
87            #reset-cells = <1>;
88    };
89