xref: /freebsd/sys/contrib/device-tree/Bindings/clock/nvidia,tegra20-car.yaml (revision 5956d97f4b3204318ceb6aa9c77bd0bc6ea87a41)

# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/clock/nvidia,tegra20-car.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: NVIDIA Tegra Clock and Reset Controller

maintainers:
  - Jon Hunter <jonathanh@nvidia.com>
  - Thierry Reding <thierry.reding@gmail.com>

description: |
  The Clock and Reset (CAR) is the HW module responsible for muxing and gating
  Tegra's clocks, and setting their rates. It comprises CLKGEN and RSTGEN units.

  CLKGEN provides the registers to program the PLLs. It controls most of
  the clock source programming and most of the clock dividers.

  CLKGEN input signals include the external clock for the reference frequency
  (12 MHz, 26 MHz) and the external clock for the Real Time Clock (32.768 KHz).

  Outputs from CLKGEN are inputs clock of the h/w blocks in the Tegra system.

  RSTGEN provides the registers needed to control resetting of each block in
  the Tegra system.

properties:
  compatible:
    enum:
      - nvidia,tegra20-car
      - nvidia,tegra30-car
      - nvidia,tegra114-car
      - nvidia,tegra210-car

  reg:
    maxItems: 1

  '#clock-cells':
    const: 1

  "#reset-cells":
    const: 1

required:
  - compatible
  - reg
  - '#clock-cells'
  - "#reset-cells"

additionalProperties: false

examples:
  - |
    #include <dt-bindings/clock/tegra20-car.h>

    car: clock-controller@60006000 {
        compatible = "nvidia,tegra20-car";
        reg = <0x60006000 0x1000>;
        #clock-cells = <1>;
        #reset-cells = <1>;
    };

    usb-controller@c5004000 {
        compatible = "nvidia,tegra20-ehci";
        reg = <0xc5004000 0x4000>;
        clocks = <&car TEGRA20_CLK_USB2>;
        resets = <&car TEGRA20_CLK_USB2>;
    };