xref: /freebsd/sys/contrib/device-tree/Bindings/clock/idt,versaclock5.txt (revision 7ef62cebc2f965b0f640263e179276928885e33d)
1Binding for IDT VersaClock 5,6 programmable i2c clock generators.
2
3The IDT VersaClock 5 and VersaClock 6 are programmable i2c clock
4generators providing from 3 to 12 output clocks.
5
6==I2C device node==
7
8Required properties:
9- compatible:	shall be one of
10		"idt,5p49v5923"
11		"idt,5p49v5925"
12		"idt,5p49v5933"
13		"idt,5p49v5935"
14		"idt,5p49v6901"
15		"idt,5p49v6965"
16- reg:		i2c device address, shall be 0x68 or 0x6a.
17- #clock-cells:	from common clock binding; shall be set to 1.
18- clocks:	from common clock binding; list of parent clock handles,
19		- 5p49v5923 and
20		  5p49v5925 and
21		  5p49v6901: (required) either or both of XTAL or CLKIN
22					reference clock.
23		- 5p49v5933 and
24		- 5p49v5935: (optional) property not present (internal
25					Xtal used) or CLKIN reference
26					clock.
27- clock-names:	from common clock binding; clock input names, can be
28		- 5p49v5923 and
29		  5p49v5925 and
30		  5p49v6901: (required) either or both of "xin", "clkin".
31		- 5p49v5933 and
32		- 5p49v5935: (optional) property not present or "clkin".
33
34==Mapping between clock specifier and physical pins==
35
36When referencing the provided clock in the DT using phandle and
37clock specifier, the following mapping applies:
38
395P49V5923:
40	0 -- OUT0_SEL_I2CB
41	1 -- OUT1
42	2 -- OUT2
43
445P49V5933:
45	0 -- OUT0_SEL_I2CB
46	1 -- OUT1
47	2 -- OUT4
48
495P49V5925 and
505P49V5935:
51	0 -- OUT0_SEL_I2CB
52	1 -- OUT1
53	2 -- OUT2
54	3 -- OUT3
55	4 -- OUT4
56
575P49V6901:
58	0 -- OUT0_SEL_I2CB
59	1 -- OUT1
60	2 -- OUT2
61	3 -- OUT3
62	4 -- OUT4
63
64==Example==
65
66/* 25MHz reference crystal */
67ref25: ref25m {
68	compatible = "fixed-clock";
69	#clock-cells = <0>;
70	clock-frequency = <25000000>;
71};
72
73i2c-master-node {
74
75	/* IDT 5P49V5923 i2c clock generator */
76	vc5: clock-generator@6a {
77		compatible = "idt,5p49v5923";
78		reg = <0x6a>;
79		#clock-cells = <1>;
80
81		/* Connect XIN input to 25MHz reference */
82		clocks = <&ref25m>;
83		clock-names = "xin";
84	};
85};
86
87/* Consumer referencing the 5P49V5923 pin OUT1 */
88consumer {
89	...
90	clocks = <&vc5 1>;
91	...
92}
93