1*c66ec88fSEmmanuel VadotTegra SoC SATA AHCI controller 2*c66ec88fSEmmanuel Vadot 3*c66ec88fSEmmanuel VadotRequired properties : 4*c66ec88fSEmmanuel Vadot- compatible : Must be one of: 5*c66ec88fSEmmanuel Vadot - Tegra124 : "nvidia,tegra124-ahci" 6*c66ec88fSEmmanuel Vadot - Tegra132 : "nvidia,tegra132-ahci", "nvidia,tegra124-ahci" 7*c66ec88fSEmmanuel Vadot - Tegra210 : "nvidia,tegra210-ahci" 8*c66ec88fSEmmanuel Vadot- reg : Should contain 2 entries: 9*c66ec88fSEmmanuel Vadot - AHCI register set (SATA BAR5) 10*c66ec88fSEmmanuel Vadot - SATA register set 11*c66ec88fSEmmanuel Vadot- interrupts : Defines the interrupt used by SATA 12*c66ec88fSEmmanuel Vadot- clocks : Must contain an entry for each entry in clock-names. 13*c66ec88fSEmmanuel Vadot See ../clocks/clock-bindings.txt for details. 14*c66ec88fSEmmanuel Vadot- clock-names : Must include the following entries: 15*c66ec88fSEmmanuel Vadot - sata 16*c66ec88fSEmmanuel Vadot - sata-oob 17*c66ec88fSEmmanuel Vadot- resets : Must contain an entry for each entry in reset-names. 18*c66ec88fSEmmanuel Vadot See ../reset/reset.txt for details. 19*c66ec88fSEmmanuel Vadot- reset-names : Must include the following entries: 20*c66ec88fSEmmanuel Vadot - sata 21*c66ec88fSEmmanuel Vadot - sata-oob 22*c66ec88fSEmmanuel Vadot - sata-cold 23*c66ec88fSEmmanuel Vadot- phys : Must contain an entry for each entry in phy-names. 24*c66ec88fSEmmanuel Vadot See ../phy/phy-bindings.txt for details. 25*c66ec88fSEmmanuel Vadot- phy-names : Must include the following entries: 26*c66ec88fSEmmanuel Vadot - For Tegra124 and Tegra132: 27*c66ec88fSEmmanuel Vadot - sata-phy : XUSB PADCTL SATA PHY 28*c66ec88fSEmmanuel Vadot- For Tegra124 and Tegra132: 29*c66ec88fSEmmanuel Vadot - hvdd-supply : Defines the SATA HVDD regulator 30*c66ec88fSEmmanuel Vadot - vddio-supply : Defines the SATA VDDIO regulator 31*c66ec88fSEmmanuel Vadot - avdd-supply : Defines the SATA AVDD regulator 32*c66ec88fSEmmanuel Vadot - target-5v-supply : Defines the SATA 5V power regulator 33*c66ec88fSEmmanuel Vadot - target-12v-supply : Defines the SATA 12V power regulator 34*c66ec88fSEmmanuel Vadot 35*c66ec88fSEmmanuel VadotOptional properties: 36*c66ec88fSEmmanuel Vadot- reg : 37*c66ec88fSEmmanuel Vadot - AUX register set 38*c66ec88fSEmmanuel Vadot- clock-names : 39*c66ec88fSEmmanuel Vadot - cml1 : 40*c66ec88fSEmmanuel Vadot cml1 clock should be defined here if the PHY driver 41*c66ec88fSEmmanuel Vadot doesn't manage them. If it does, they should not be. 42*c66ec88fSEmmanuel Vadot- phy-names : 43*c66ec88fSEmmanuel Vadot - For T210: 44*c66ec88fSEmmanuel Vadot - sata-phy 45