1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/ata/intel,ixp4xx-compact-flash.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: Intel IXP4xx CompactFlash Card Controller 8 9maintainers: 10 - Linus Walleij <linus.walleij@linaro.org> 11 12description: | 13 The IXP4xx network processors have a CompactFlash interface that presents 14 a CompactFlash card to the system as a true IDE (parallel ATA) device. The 15 device is always connected to the expansion bus of the IXP4xx SoCs using one 16 or two chip select areas and address translating logic on the board. The 17 node must be placed inside a chip select node on the IXP4xx expansion bus. 18 19properties: 20 compatible: 21 const: intel,ixp4xx-compact-flash 22 23 reg: 24 items: 25 - description: Command interface registers 26 - description: Control interface registers 27 28 interrupts: 29 maxItems: 1 30 31required: 32 - compatible 33 - reg 34 - interrupts 35 36allOf: 37 - $ref: pata-common.yaml# 38 39unevaluatedProperties: false 40 41examples: 42 - | 43 #include <dt-bindings/interrupt-controller/irq.h> 44 45 bus@c4000000 { 46 compatible = "intel,ixp43x-expansion-bus-controller", "syscon"; 47 reg = <0xc4000000 0x1000>; 48 native-endian; 49 #address-cells = <2>; 50 #size-cells = <1>; 51 ranges = <0 0x0 0x50000000 0x01000000>, <1 0x0 0x51000000 0x01000000>; 52 dma-ranges = <0 0x0 0x50000000 0x01000000>, <1 0x0 0x51000000 0x01000000>; 53 ide@1,0 { 54 compatible = "intel,ixp4xx-compact-flash"; 55 reg = <1 0x00000000 0x1000>, <1 0x00040000 0x1000>; 56 interrupt-parent = <&gpio0>; 57 interrupts = <12 IRQ_TYPE_EDGE_RISING>; 58 }; 59 }; 60 61... 62