1STMicroelectronics STi SATA controller 2 3This binding describes a SATA device. 4 5Required properties: 6 - compatible : Must be "st,ahci" 7 - reg : Physical base addresses and length of register sets 8 - interrupts : Interrupt associated with the SATA device 9 - interrupt-names : Associated name must be; "hostc" 10 - clocks : The phandle for the clock 11 - clock-names : Associated name must be; "ahci_clk" 12 - phys : The phandle for the PHY port 13 - phy-names : Associated name must be; "ahci_phy" 14 15Optional properties: 16 - resets : The power-down, soft-reset and power-reset lines of SATA IP 17 - reset-names : Associated names must be; "pwr-dwn", "sw-rst" and "pwr-rst" 18 19Example: 20 21 /* Example for stih407 family silicon */ 22 sata0: sata@9b20000 { 23 compatible = "st,ahci"; 24 reg = <0x9b20000 0x1000>; 25 interrupts = <GIC_SPI 159 IRQ_TYPE_NONE>; 26 interrupt-names = "hostc"; 27 phys = <&phy_port0 PHY_TYPE_SATA>; 28 phy-names = "ahci_phy"; 29 resets = <&powerdown STIH407_SATA0_POWERDOWN>, 30 <&softreset STIH407_SATA0_SOFTRESET>, 31 <&softreset STIH407_SATA0_PWR_SOFTRESET>; 32 reset-names = "pwr-dwn", "sw-rst", "pwr-rst"; 33 clocks = <&clk_s_c0_flexgen CLK_ICN_REG>; 34 clock-names = "ahci_clk"; 35 }; 36