xref: /freebsd/sys/contrib/dev/iwlwifi/fw/api/phy-ctxt.h (revision 2da066ef6d85d3f7cd8aaec14369d66254836536)
1 /* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
2 /*
3  * Copyright (C) 2012-2014, 2018, 2020-2022 Intel Corporation
4  * Copyright (C) 2013-2015 Intel Mobile Communications GmbH
5  * Copyright (C) 2016-2017 Intel Deutschland GmbH
6  */
7 #ifndef __iwl_fw_api_phy_ctxt_h__
8 #define __iwl_fw_api_phy_ctxt_h__
9 
10 /* Supported bands */
11 #define PHY_BAND_5  (0)
12 #define PHY_BAND_24 (1)
13 #define PHY_BAND_6 (2)
14 
15 /* Supported channel width, vary if there is VHT support */
16 #define IWL_PHY_CHANNEL_MODE20	0x0
17 #define IWL_PHY_CHANNEL_MODE40	0x1
18 #define IWL_PHY_CHANNEL_MODE80	0x2
19 #define IWL_PHY_CHANNEL_MODE160	0x3
20 /* and 320 MHz for EHT */
21 #define IWL_PHY_CHANNEL_MODE320	0x4
22 
23 /*
24  * Control channel position:
25  * For legacy set bit means upper channel, otherwise lower.
26  * For VHT - bit-2 marks if the control is lower/upper relative to center-freq
27  *   bits-1:0 mark the distance from the center freq. for 20Mhz, offset is 0.
28  *                                   center_freq
29  * For EHT - bit-3 is used for extended distance
30  *                                                |
31  * 40Mhz                                     |____|____|
32  * 80Mhz                                |____|____|____|____|
33  * 160Mhz                     |____|____|____|____|____|____|____|____|
34  * 320MHz |____|____|____|____|____|____|____|____|____|____|____|____|____|____|____|____|
35  * code    1011 1010 1001 1000 0011 0010 0001 0000 0100 0101 0110 0111 1100 1101 1110 1111
36  */
37 #define IWL_PHY_CTRL_POS_ABOVE		0x4
38 #define IWL_PHY_CTRL_POS_OFFS_EXT	0x8
39 #define IWL_PHY_CTRL_POS_OFFS_MSK	0x3
40 
41 /*
42  * struct iwl_fw_channel_info_v1 - channel information
43  *
44  * @band: PHY_BAND_*
45  * @channel: channel number
46  * @width: PHY_[VHT|LEGACY]_CHANNEL_*
47  * @ctrl channel: PHY_[VHT|LEGACY]_CTRL_*
48  */
49 struct iwl_fw_channel_info_v1 {
50 	u8 band;
51 	u8 channel;
52 	u8 width;
53 	u8 ctrl_pos;
54 } __packed; /* CHANNEL_CONFIG_API_S_VER_1 */
55 
56 /*
57  * struct iwl_fw_channel_info - channel information
58  *
59  * @channel: channel number
60  * @band: PHY_BAND_*
61  * @width: PHY_[VHT|LEGACY]_CHANNEL_*
62  * @ctrl channel: PHY_[VHT|LEGACY]_CTRL_*
63  * @reserved: for future use and alignment
64  */
65 struct iwl_fw_channel_info {
66 	__le32 channel;
67 	u8 band;
68 	u8 width;
69 	u8 ctrl_pos;
70 	u8 reserved;
71 } __packed; /*CHANNEL_CONFIG_API_S_VER_2 */
72 
73 #define PHY_RX_CHAIN_DRIVER_FORCE_POS	(0)
74 #define PHY_RX_CHAIN_DRIVER_FORCE_MSK \
75 	(0x1 << PHY_RX_CHAIN_DRIVER_FORCE_POS)
76 #define PHY_RX_CHAIN_VALID_POS		(1)
77 #define PHY_RX_CHAIN_VALID_MSK \
78 	(0x7 << PHY_RX_CHAIN_VALID_POS)
79 #define PHY_RX_CHAIN_FORCE_SEL_POS	(4)
80 #define PHY_RX_CHAIN_FORCE_SEL_MSK \
81 	(0x7 << PHY_RX_CHAIN_FORCE_SEL_POS)
82 #define PHY_RX_CHAIN_FORCE_MIMO_SEL_POS	(7)
83 #define PHY_RX_CHAIN_FORCE_MIMO_SEL_MSK \
84 	(0x7 << PHY_RX_CHAIN_FORCE_MIMO_SEL_POS)
85 #define PHY_RX_CHAIN_CNT_POS		(10)
86 #define PHY_RX_CHAIN_CNT_MSK \
87 	(0x3 << PHY_RX_CHAIN_CNT_POS)
88 #define PHY_RX_CHAIN_MIMO_CNT_POS	(12)
89 #define PHY_RX_CHAIN_MIMO_CNT_MSK \
90 	(0x3 << PHY_RX_CHAIN_MIMO_CNT_POS)
91 #define PHY_RX_CHAIN_MIMO_FORCE_POS	(14)
92 #define PHY_RX_CHAIN_MIMO_FORCE_MSK \
93 	(0x1 << PHY_RX_CHAIN_MIMO_FORCE_POS)
94 
95 /* TODO: fix the value, make it depend on firmware at runtime? */
96 #define NUM_PHY_CTX	3
97 
98 /* TODO: complete missing documentation */
99 /**
100  * struct iwl_phy_context_cmd_tail - tail of iwl_phy_ctx_cmd for alignment with
101  *	various channel structures.
102  *
103  * @txchain_info: ???
104  * @rxchain_info: ???
105  * @acquisition_data: ???
106  * @dsp_cfg_flags: set to 0
107  */
108 struct iwl_phy_context_cmd_tail {
109 	__le32 txchain_info;
110 	__le32 rxchain_info;
111 	__le32 acquisition_data;
112 	__le32 dsp_cfg_flags;
113 } __packed;
114 
115 /**
116  * struct iwl_phy_context_cmd - config of the PHY context
117  * ( PHY_CONTEXT_CMD = 0x8 )
118  * @id_and_color: ID and color of the relevant Binding
119  * @action: action to perform, see &enum iwl_ctxt_action
120  * @apply_time: 0 means immediate apply and context switch.
121  *	other value means apply new params after X usecs
122  * @tx_param_color: ???
123  * @ci: channel info
124  * @tail: command tail
125  */
126 struct iwl_phy_context_cmd_v1 {
127 	/* COMMON_INDEX_HDR_API_S_VER_1 */
128 	__le32 id_and_color;
129 	__le32 action;
130 	/* PHY_CONTEXT_DATA_API_S_VER_3 */
131 	__le32 apply_time;
132 	__le32 tx_param_color;
133 	struct iwl_fw_channel_info ci;
134 	struct iwl_phy_context_cmd_tail tail;
135 } __packed; /* PHY_CONTEXT_CMD_API_VER_1 */
136 
137 /**
138  * struct iwl_phy_context_cmd - config of the PHY context
139  * ( PHY_CONTEXT_CMD = 0x8 )
140  * @id_and_color: ID and color of the relevant Binding
141  * @action: action to perform, see &enum iwl_ctxt_action
142  * @lmac_id: the lmac id the phy context belongs to
143  * @ci: channel info
144  * @rxchain_info: ???
145  * @dsp_cfg_flags: set to 0
146  * @reserved: reserved to align to 64 bit
147  */
148 struct iwl_phy_context_cmd {
149 	/* COMMON_INDEX_HDR_API_S_VER_1 */
150 	__le32 id_and_color;
151 	__le32 action;
152 	/* PHY_CONTEXT_DATA_API_S_VER_3, PHY_CONTEXT_DATA_API_S_VER_4 */
153 	struct iwl_fw_channel_info ci;
154 	__le32 lmac_id;
155 	__le32 rxchain_info; /* reserved in _VER_4 */
156 	__le32 dsp_cfg_flags;
157 	__le32 reserved;
158 } __packed; /* PHY_CONTEXT_CMD_API_VER_3, PHY_CONTEXT_CMD_API_VER_4 */
159 
160 #endif /* __iwl_fw_api_phy_ctxt_h__ */
161