xref: /freebsd/sys/contrib/dev/iwlwifi/fw/api/phy-ctxt.h (revision 18054d0220cfc8df9c9568c437bd6fbb59d53c3c)
1 /* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
2 /*
3  * Copyright (C) 2012-2014, 2018, 2020-2021 Intel Corporation
4  * Copyright (C) 2013-2015 Intel Mobile Communications GmbH
5  * Copyright (C) 2016-2017 Intel Deutschland GmbH
6  */
7 #ifndef __iwl_fw_api_phy_ctxt_h__
8 #define __iwl_fw_api_phy_ctxt_h__
9 
10 /* Supported bands */
11 #define PHY_BAND_5  (0)
12 #define PHY_BAND_24 (1)
13 #define PHY_BAND_6 (2)
14 
15 /* Supported channel width, vary if there is VHT support */
16 #define PHY_VHT_CHANNEL_MODE20	(0x0)
17 #define PHY_VHT_CHANNEL_MODE40	(0x1)
18 #define PHY_VHT_CHANNEL_MODE80	(0x2)
19 #define PHY_VHT_CHANNEL_MODE160	(0x3)
20 
21 /*
22  * Control channel position:
23  * For legacy set bit means upper channel, otherwise lower.
24  * For VHT - bit-2 marks if the control is lower/upper relative to center-freq
25  *   bits-1:0 mark the distance from the center freq. for 20Mhz, offset is 0.
26  *                                   center_freq
27  *                                        |
28  * 40Mhz                          |_______|_______|
29  * 80Mhz                  |_______|_______|_______|_______|
30  * 160Mhz |_______|_______|_______|_______|_______|_______|_______|_______|
31  * code      011     010     001     000  |  100     101     110    111
32  */
33 #define PHY_VHT_CTRL_POS_1_BELOW  (0x0)
34 #define PHY_VHT_CTRL_POS_2_BELOW  (0x1)
35 #define PHY_VHT_CTRL_POS_3_BELOW  (0x2)
36 #define PHY_VHT_CTRL_POS_4_BELOW  (0x3)
37 #define PHY_VHT_CTRL_POS_1_ABOVE  (0x4)
38 #define PHY_VHT_CTRL_POS_2_ABOVE  (0x5)
39 #define PHY_VHT_CTRL_POS_3_ABOVE  (0x6)
40 #define PHY_VHT_CTRL_POS_4_ABOVE  (0x7)
41 
42 /*
43  * struct iwl_fw_channel_info_v1 - channel information
44  *
45  * @band: PHY_BAND_*
46  * @channel: channel number
47  * @width: PHY_[VHT|LEGACY]_CHANNEL_*
48  * @ctrl channel: PHY_[VHT|LEGACY]_CTRL_*
49  */
50 struct iwl_fw_channel_info_v1 {
51 	u8 band;
52 	u8 channel;
53 	u8 width;
54 	u8 ctrl_pos;
55 } __packed; /* CHANNEL_CONFIG_API_S_VER_1 */
56 
57 /*
58  * struct iwl_fw_channel_info - channel information
59  *
60  * @channel: channel number
61  * @band: PHY_BAND_*
62  * @width: PHY_[VHT|LEGACY]_CHANNEL_*
63  * @ctrl channel: PHY_[VHT|LEGACY]_CTRL_*
64  * @reserved: for future use and alignment
65  */
66 struct iwl_fw_channel_info {
67 	__le32 channel;
68 	u8 band;
69 	u8 width;
70 	u8 ctrl_pos;
71 	u8 reserved;
72 } __packed; /*CHANNEL_CONFIG_API_S_VER_2 */
73 
74 #define PHY_RX_CHAIN_DRIVER_FORCE_POS	(0)
75 #define PHY_RX_CHAIN_DRIVER_FORCE_MSK \
76 	(0x1 << PHY_RX_CHAIN_DRIVER_FORCE_POS)
77 #define PHY_RX_CHAIN_VALID_POS		(1)
78 #define PHY_RX_CHAIN_VALID_MSK \
79 	(0x7 << PHY_RX_CHAIN_VALID_POS)
80 #define PHY_RX_CHAIN_FORCE_SEL_POS	(4)
81 #define PHY_RX_CHAIN_FORCE_SEL_MSK \
82 	(0x7 << PHY_RX_CHAIN_FORCE_SEL_POS)
83 #define PHY_RX_CHAIN_FORCE_MIMO_SEL_POS	(7)
84 #define PHY_RX_CHAIN_FORCE_MIMO_SEL_MSK \
85 	(0x7 << PHY_RX_CHAIN_FORCE_MIMO_SEL_POS)
86 #define PHY_RX_CHAIN_CNT_POS		(10)
87 #define PHY_RX_CHAIN_CNT_MSK \
88 	(0x3 << PHY_RX_CHAIN_CNT_POS)
89 #define PHY_RX_CHAIN_MIMO_CNT_POS	(12)
90 #define PHY_RX_CHAIN_MIMO_CNT_MSK \
91 	(0x3 << PHY_RX_CHAIN_MIMO_CNT_POS)
92 #define PHY_RX_CHAIN_MIMO_FORCE_POS	(14)
93 #define PHY_RX_CHAIN_MIMO_FORCE_MSK \
94 	(0x1 << PHY_RX_CHAIN_MIMO_FORCE_POS)
95 
96 /* TODO: fix the value, make it depend on firmware at runtime? */
97 #define NUM_PHY_CTX	3
98 
99 /* TODO: complete missing documentation */
100 /**
101  * struct iwl_phy_context_cmd_tail - tail of iwl_phy_ctx_cmd for alignment with
102  *	various channel structures.
103  *
104  * @txchain_info: ???
105  * @rxchain_info: ???
106  * @acquisition_data: ???
107  * @dsp_cfg_flags: set to 0
108  */
109 struct iwl_phy_context_cmd_tail {
110 	__le32 txchain_info;
111 	__le32 rxchain_info;
112 	__le32 acquisition_data;
113 	__le32 dsp_cfg_flags;
114 } __packed;
115 
116 /**
117  * struct iwl_phy_context_cmd - config of the PHY context
118  * ( PHY_CONTEXT_CMD = 0x8 )
119  * @id_and_color: ID and color of the relevant Binding
120  * @action: action to perform, one of FW_CTXT_ACTION_*
121  * @apply_time: 0 means immediate apply and context switch.
122  *	other value means apply new params after X usecs
123  * @tx_param_color: ???
124  * @ci: channel info
125  * @tail: command tail
126  */
127 struct iwl_phy_context_cmd_v1 {
128 	/* COMMON_INDEX_HDR_API_S_VER_1 */
129 	__le32 id_and_color;
130 	__le32 action;
131 	/* PHY_CONTEXT_DATA_API_S_VER_3 */
132 	__le32 apply_time;
133 	__le32 tx_param_color;
134 	struct iwl_fw_channel_info ci;
135 	struct iwl_phy_context_cmd_tail tail;
136 } __packed; /* PHY_CONTEXT_CMD_API_VER_1 */
137 
138 /**
139  * struct iwl_phy_context_cmd - config of the PHY context
140  * ( PHY_CONTEXT_CMD = 0x8 )
141  * @id_and_color: ID and color of the relevant Binding
142  * @action: action to perform, one of FW_CTXT_ACTION_*
143  * @lmac_id: the lmac id the phy context belongs to
144  * @ci: channel info
145  * @rxchain_info: ???
146  * @dsp_cfg_flags: set to 0
147  * @reserved: reserved to align to 64 bit
148  */
149 struct iwl_phy_context_cmd {
150 	/* COMMON_INDEX_HDR_API_S_VER_1 */
151 	__le32 id_and_color;
152 	__le32 action;
153 	/* PHY_CONTEXT_DATA_API_S_VER_3, PHY_CONTEXT_DATA_API_S_VER_4 */
154 	struct iwl_fw_channel_info ci;
155 	__le32 lmac_id;
156 	__le32 rxchain_info; /* reserved in _VER_4 */
157 	__le32 dsp_cfg_flags;
158 	__le32 reserved;
159 } __packed; /* PHY_CONTEXT_CMD_API_VER_3, PHY_CONTEXT_CMD_API_VER_4 */
160 
161 #endif /* __iwl_fw_api_phy_ctxt_h__ */
162