xref: /freebsd/sys/contrib/dev/acpica/include/acoutput.h (revision 8d20be1e22095c27faf8fe8b2f0d089739cc742e)
1 /******************************************************************************
2  *
3  * Name: acoutput.h -- debug output
4  *
5  *****************************************************************************/
6 
7 /*
8  * Copyright (C) 2000 - 2013, Intel Corp.
9  * All rights reserved.
10  *
11  * Redistribution and use in source and binary forms, with or without
12  * modification, are permitted provided that the following conditions
13  * are met:
14  * 1. Redistributions of source code must retain the above copyright
15  *    notice, this list of conditions, and the following disclaimer,
16  *    without modification.
17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18  *    substantially similar to the "NO WARRANTY" disclaimer below
19  *    ("Disclaimer") and any redistribution must be conditioned upon
20  *    including a substantially similar Disclaimer requirement for further
21  *    binary redistribution.
22  * 3. Neither the names of the above-listed copyright holders nor the names
23  *    of any contributors may be used to endorse or promote products derived
24  *    from this software without specific prior written permission.
25  *
26  * Alternatively, this software may be distributed under the terms of the
27  * GNU General Public License ("GPL") version 2 as published by the Free
28  * Software Foundation.
29  *
30  * NO WARRANTY
31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41  * POSSIBILITY OF SUCH DAMAGES.
42  */
43 
44 #ifndef __ACOUTPUT_H__
45 #define __ACOUTPUT_H__
46 
47 /*
48  * Debug levels and component IDs. These are used to control the
49  * granularity of the output of the ACPI_DEBUG_PRINT macro -- on a
50  * per-component basis and a per-exception-type basis.
51  */
52 
53 /* Component IDs are used in the global "DebugLayer" */
54 
55 #define ACPI_UTILITIES              0x00000001
56 #define ACPI_HARDWARE               0x00000002
57 #define ACPI_EVENTS                 0x00000004
58 #define ACPI_TABLES                 0x00000008
59 #define ACPI_NAMESPACE              0x00000010
60 #define ACPI_PARSER                 0x00000020
61 #define ACPI_DISPATCHER             0x00000040
62 #define ACPI_EXECUTER               0x00000080
63 #define ACPI_RESOURCES              0x00000100
64 #define ACPI_CA_DEBUGGER            0x00000200
65 #define ACPI_OS_SERVICES            0x00000400
66 #define ACPI_CA_DISASSEMBLER        0x00000800
67 
68 /* Component IDs for ACPI tools and utilities */
69 
70 #define ACPI_COMPILER               0x00001000
71 #define ACPI_TOOLS                  0x00002000
72 #define ACPI_EXAMPLE                0x00004000
73 #define ACPI_DRIVER                 0x00008000
74 #define DT_COMPILER                 0x00010000
75 #define ASL_PREPROCESSOR            0x00020000
76 
77 #define ACPI_ALL_COMPONENTS         0x0001FFFF
78 #define ACPI_COMPONENT_DEFAULT      (ACPI_ALL_COMPONENTS)
79 
80 /* Component IDs reserved for ACPI drivers */
81 
82 #define ACPI_ALL_DRIVERS            0xFFFF0000
83 
84 
85 /*
86  * Raw debug output levels, do not use these in the ACPI_DEBUG_PRINT macros
87  */
88 #define ACPI_LV_INIT                0x00000001
89 #define ACPI_LV_DEBUG_OBJECT        0x00000002
90 #define ACPI_LV_INFO                0x00000004
91 #define ACPI_LV_REPAIR              0x00000008
92 #define ACPI_LV_ALL_EXCEPTIONS      0x0000000F
93 
94 /* Trace verbosity level 1 [Standard Trace Level] */
95 
96 #define ACPI_LV_INIT_NAMES          0x00000020
97 #define ACPI_LV_PARSE               0x00000040
98 #define ACPI_LV_LOAD                0x00000080
99 #define ACPI_LV_DISPATCH            0x00000100
100 #define ACPI_LV_EXEC                0x00000200
101 #define ACPI_LV_NAMES               0x00000400
102 #define ACPI_LV_OPREGION            0x00000800
103 #define ACPI_LV_BFIELD              0x00001000
104 #define ACPI_LV_TABLES              0x00002000
105 #define ACPI_LV_VALUES              0x00004000
106 #define ACPI_LV_OBJECTS             0x00008000
107 #define ACPI_LV_RESOURCES           0x00010000
108 #define ACPI_LV_USER_REQUESTS       0x00020000
109 #define ACPI_LV_PACKAGE             0x00040000
110 #define ACPI_LV_VERBOSITY1          0x0007FF40 | ACPI_LV_ALL_EXCEPTIONS
111 
112 /* Trace verbosity level 2 [Function tracing and memory allocation] */
113 
114 #define ACPI_LV_ALLOCATIONS         0x00100000
115 #define ACPI_LV_FUNCTIONS           0x00200000
116 #define ACPI_LV_OPTIMIZATIONS       0x00400000
117 #define ACPI_LV_VERBOSITY2          0x00700000 | ACPI_LV_VERBOSITY1
118 #define ACPI_LV_ALL                 ACPI_LV_VERBOSITY2
119 
120 /* Trace verbosity level 3 [Threading, I/O, and Interrupts] */
121 
122 #define ACPI_LV_MUTEX               0x01000000
123 #define ACPI_LV_THREADS             0x02000000
124 #define ACPI_LV_IO                  0x04000000
125 #define ACPI_LV_INTERRUPTS          0x08000000
126 #define ACPI_LV_VERBOSITY3          0x0F000000 | ACPI_LV_VERBOSITY2
127 
128 /* Exceptionally verbose output -- also used in the global "DebugLevel"  */
129 
130 #define ACPI_LV_AML_DISASSEMBLE     0x10000000
131 #define ACPI_LV_VERBOSE_INFO        0x20000000
132 #define ACPI_LV_FULL_TABLES         0x40000000
133 #define ACPI_LV_EVENTS              0x80000000
134 #define ACPI_LV_VERBOSE             0xF0000000
135 
136 
137 /*
138  * Debug level macros that are used in the DEBUG_PRINT macros
139  */
140 #define ACPI_DEBUG_LEVEL(dl)        (UINT32) dl,ACPI_DEBUG_PARAMETERS
141 
142 /*
143  * Exception level -- used in the global "DebugLevel"
144  *
145  * Note: For errors, use the ACPI_ERROR or ACPI_EXCEPTION interfaces.
146  * For warnings, use ACPI_WARNING.
147  */
148 #define ACPI_DB_INIT                ACPI_DEBUG_LEVEL (ACPI_LV_INIT)
149 #define ACPI_DB_DEBUG_OBJECT        ACPI_DEBUG_LEVEL (ACPI_LV_DEBUG_OBJECT)
150 #define ACPI_DB_INFO                ACPI_DEBUG_LEVEL (ACPI_LV_INFO)
151 #define ACPI_DB_REPAIR              ACPI_DEBUG_LEVEL (ACPI_LV_REPAIR)
152 #define ACPI_DB_ALL_EXCEPTIONS      ACPI_DEBUG_LEVEL (ACPI_LV_ALL_EXCEPTIONS)
153 
154 /* Trace level -- also used in the global "DebugLevel" */
155 
156 #define ACPI_DB_INIT_NAMES          ACPI_DEBUG_LEVEL (ACPI_LV_INIT_NAMES)
157 #define ACPI_DB_THREADS             ACPI_DEBUG_LEVEL (ACPI_LV_THREADS)
158 #define ACPI_DB_PARSE               ACPI_DEBUG_LEVEL (ACPI_LV_PARSE)
159 #define ACPI_DB_DISPATCH            ACPI_DEBUG_LEVEL (ACPI_LV_DISPATCH)
160 #define ACPI_DB_LOAD                ACPI_DEBUG_LEVEL (ACPI_LV_LOAD)
161 #define ACPI_DB_EXEC                ACPI_DEBUG_LEVEL (ACPI_LV_EXEC)
162 #define ACPI_DB_NAMES               ACPI_DEBUG_LEVEL (ACPI_LV_NAMES)
163 #define ACPI_DB_OPREGION            ACPI_DEBUG_LEVEL (ACPI_LV_OPREGION)
164 #define ACPI_DB_BFIELD              ACPI_DEBUG_LEVEL (ACPI_LV_BFIELD)
165 #define ACPI_DB_TABLES              ACPI_DEBUG_LEVEL (ACPI_LV_TABLES)
166 #define ACPI_DB_FUNCTIONS           ACPI_DEBUG_LEVEL (ACPI_LV_FUNCTIONS)
167 #define ACPI_DB_OPTIMIZATIONS       ACPI_DEBUG_LEVEL (ACPI_LV_OPTIMIZATIONS)
168 #define ACPI_DB_VALUES              ACPI_DEBUG_LEVEL (ACPI_LV_VALUES)
169 #define ACPI_DB_OBJECTS             ACPI_DEBUG_LEVEL (ACPI_LV_OBJECTS)
170 #define ACPI_DB_ALLOCATIONS         ACPI_DEBUG_LEVEL (ACPI_LV_ALLOCATIONS)
171 #define ACPI_DB_RESOURCES           ACPI_DEBUG_LEVEL (ACPI_LV_RESOURCES)
172 #define ACPI_DB_IO                  ACPI_DEBUG_LEVEL (ACPI_LV_IO)
173 #define ACPI_DB_INTERRUPTS          ACPI_DEBUG_LEVEL (ACPI_LV_INTERRUPTS)
174 #define ACPI_DB_USER_REQUESTS       ACPI_DEBUG_LEVEL (ACPI_LV_USER_REQUESTS)
175 #define ACPI_DB_PACKAGE             ACPI_DEBUG_LEVEL (ACPI_LV_PACKAGE)
176 #define ACPI_DB_MUTEX               ACPI_DEBUG_LEVEL (ACPI_LV_MUTEX)
177 #define ACPI_DB_EVENTS              ACPI_DEBUG_LEVEL (ACPI_LV_EVENTS)
178 
179 #define ACPI_DB_ALL                 ACPI_DEBUG_LEVEL (ACPI_LV_ALL)
180 
181 /* Defaults for DebugLevel, debug and normal */
182 
183 #define ACPI_DEBUG_DEFAULT          (ACPI_LV_INIT | ACPI_LV_DEBUG_OBJECT | ACPI_LV_REPAIR)
184 #define ACPI_NORMAL_DEFAULT         (ACPI_LV_INIT | ACPI_LV_DEBUG_OBJECT | ACPI_LV_REPAIR)
185 #define ACPI_DEBUG_ALL              (ACPI_LV_AML_DISASSEMBLE | ACPI_LV_ALL_EXCEPTIONS | ACPI_LV_ALL)
186 
187 
188 #if defined (ACPI_DEBUG_OUTPUT) || !defined (ACPI_NO_ERROR_MESSAGES)
189 /*
190  * The module name is used primarily for error and debug messages.
191  * The __FILE__ macro is not very useful for this, because it
192  * usually includes the entire pathname to the module making the
193  * debug output difficult to read.
194  */
195 #define ACPI_MODULE_NAME(Name)          static const char ACPI_UNUSED_VAR _AcpiModuleName[] = Name;
196 #else
197 /*
198  * For the no-debug and no-error-msg cases, we must at least define
199  * a null module name.
200  */
201 #define ACPI_MODULE_NAME(Name)
202 #define _AcpiModuleName ""
203 #endif
204 
205 /*
206  * Ascii error messages can be configured out
207  */
208 #ifndef ACPI_NO_ERROR_MESSAGES
209 #define AE_INFO                         _AcpiModuleName, __LINE__
210 
211 /*
212  * Error reporting. Callers module and line number are inserted by AE_INFO,
213  * the plist contains a set of parens to allow variable-length lists.
214  * These macros are used for both the debug and non-debug versions of the code.
215  */
216 #define ACPI_INFO(plist)                AcpiInfo plist
217 #define ACPI_WARNING(plist)             AcpiWarning plist
218 #define ACPI_EXCEPTION(plist)           AcpiException plist
219 #define ACPI_ERROR(plist)               AcpiError plist
220 #define ACPI_BIOS_WARNING(plist)        AcpiBiosWarning plist
221 #define ACPI_BIOS_ERROR(plist)          AcpiBiosError plist
222 #define ACPI_DEBUG_OBJECT(obj,l,i)      AcpiExDoDebugObject(obj,l,i)
223 
224 #else
225 
226 /* No error messages */
227 
228 #define ACPI_INFO(plist)
229 #define ACPI_WARNING(plist)
230 #define ACPI_EXCEPTION(plist)
231 #define ACPI_ERROR(plist)
232 #define ACPI_BIOS_WARNING(plist)
233 #define ACPI_BIOS_ERROR(plist)
234 #define ACPI_DEBUG_OBJECT(obj,l,i)
235 
236 #endif /* ACPI_NO_ERROR_MESSAGES */
237 
238 
239 /*
240  * Debug macros that are conditionally compiled
241  */
242 #ifdef ACPI_DEBUG_OUTPUT
243 
244 /*
245  * If ACPI_GET_FUNCTION_NAME was not defined in the compiler-dependent header,
246  * define it now. This is the case where there the compiler does not support
247  * a __FUNCTION__ macro or equivalent.
248  */
249 #ifndef ACPI_GET_FUNCTION_NAME
250 #define ACPI_GET_FUNCTION_NAME          _AcpiFunctionName
251 
252 /*
253  * The Name parameter should be the procedure name as a quoted string.
254  * The function name is also used by the function exit macros below.
255  * Note: (const char) is used to be compatible with the debug interfaces
256  * and macros such as __FUNCTION__.
257  */
258 #define ACPI_FUNCTION_NAME(Name)        static const char _AcpiFunctionName[] = #Name;
259 
260 #else
261 /* Compiler supports __FUNCTION__ (or equivalent) -- Ignore this macro */
262 
263 #define ACPI_FUNCTION_NAME(Name)
264 #endif /* ACPI_GET_FUNCTION_NAME */
265 
266 /*
267  * Common parameters used for debug output functions:
268  * line number, function name, module(file) name, component ID
269  */
270 #define ACPI_DEBUG_PARAMETERS \
271     __LINE__, ACPI_GET_FUNCTION_NAME, _AcpiModuleName, _COMPONENT
272 
273 /* Check if debug output is currently dynamically enabled */
274 
275 #define ACPI_IS_DEBUG_ENABLED(Level, Component) \
276     ((Level & AcpiDbgLevel) && (Component & AcpiDbgLayer))
277 
278 /*
279  * Master debug print macros
280  * Print message if and only if:
281  *    1) Debug print for the current component is enabled
282  *    2) Debug error level or trace level for the print statement is enabled
283  *
284  * November 2012: Moved the runtime check for whether to actually emit the
285  * debug message outside of the print function itself. This improves overall
286  * performance at a relatively small code cost. Implementation involves the
287  * use of variadic macros supported by C99.
288  *
289  * Note: the ACPI_DO_WHILE0 macro is used to prevent some compilers from
290  * complaining about these constructs. On other compilers the do...while
291  * adds some extra code, so this feature is optional.
292  */
293 #ifdef ACPI_USE_DO_WHILE_0
294 #define ACPI_DO_WHILE0(a)               do a while(0)
295 #else
296 #define ACPI_DO_WHILE0(a)               a
297 #endif
298 
299 /* DEBUG_PRINT functions */
300 
301 #define ACPI_DEBUG_PRINT(plist)         ACPI_ACTUAL_DEBUG plist
302 #define ACPI_DEBUG_PRINT_RAW(plist)     ACPI_ACTUAL_DEBUG_RAW plist
303 
304 /* Helper macros for DEBUG_PRINT */
305 
306 #define ACPI_DO_DEBUG_PRINT(Function, Level, Line, Filename, Modulename, Component, ...) \
307     ACPI_DO_WHILE0 ({ \
308         if (ACPI_IS_DEBUG_ENABLED (Level, Component)) \
309         { \
310             Function (Level, Line, Filename, Modulename, Component, __VA_ARGS__); \
311         } \
312     })
313 
314 #define ACPI_ACTUAL_DEBUG(Level, Line, Filename, Modulename, Component, ...) \
315     ACPI_DO_DEBUG_PRINT (AcpiDebugPrint, Level, Line, \
316         Filename, Modulename, Component, __VA_ARGS__)
317 
318 #define ACPI_ACTUAL_DEBUG_RAW(Level, Line, Filename, Modulename, Component, ...) \
319     ACPI_DO_DEBUG_PRINT (AcpiDebugPrintRaw, Level, Line, \
320         Filename, Modulename, Component, __VA_ARGS__)
321 
322 
323 /*
324  * Function entry tracing
325  *
326  * The name of the function is emitted as a local variable that is
327  * intended to be used by both the entry trace and the exit trace.
328  */
329 
330 /* Helper macro */
331 
332 #define ACPI_TRACE_ENTRY(Name, Function, Type, Param) \
333     ACPI_FUNCTION_NAME (Name) \
334     Function (ACPI_DEBUG_PARAMETERS, (Type) (Param))
335 
336 /* The actual entry trace macros */
337 
338 #define ACPI_FUNCTION_TRACE(Name) \
339     ACPI_FUNCTION_NAME(Name) \
340     AcpiUtTrace (ACPI_DEBUG_PARAMETERS)
341 
342 #define ACPI_FUNCTION_TRACE_PTR(Name, Pointer) \
343     ACPI_TRACE_ENTRY (Name, AcpiUtTracePtr, void *, Pointer)
344 
345 #define ACPI_FUNCTION_TRACE_U32(Name, Value) \
346     ACPI_TRACE_ENTRY (Name, AcpiUtTraceU32, UINT32, Value)
347 
348 #define ACPI_FUNCTION_TRACE_STR(Name, String) \
349     ACPI_TRACE_ENTRY (Name, AcpiUtTraceStr, char *, String)
350 
351 #define ACPI_FUNCTION_ENTRY() \
352     AcpiUtTrackStackPtr()
353 
354 
355 /*
356  * Function exit tracing
357  *
358  * These macros include a return statement. This is usually considered
359  * bad form, but having a separate exit macro before the actual return
360  * is very ugly and difficult to maintain.
361  *
362  * One of the FUNCTION_TRACE macros above must be used in conjunction
363  * with these macros so that "_AcpiFunctionName" is defined.
364  *
365  * There are two versions of most of the return macros. The default version is
366  * safer, since it avoids side-effects by guaranteeing that the argument will
367  * not be evaluated twice.
368  *
369  * A less-safe version of the macros is provided for optional use if the
370  * compiler uses excessive CPU stack (for example, this may happen in the
371  * debug case if code optimzation is disabled.)
372  */
373 
374 /* Exit trace helper macro */
375 
376 #ifndef ACPI_SIMPLE_RETURN_MACROS
377 
378 #define ACPI_TRACE_EXIT(Function, Type, Param) \
379     ACPI_DO_WHILE0 ({ \
380         register Type _Param = (Type) (Param); \
381         Function (ACPI_DEBUG_PARAMETERS, _Param); \
382         return (_Param); \
383     })
384 
385 #else /* Use original less-safe macros */
386 
387 #define ACPI_TRACE_EXIT(Function, Type, Param) \
388     ACPI_DO_WHILE0 ({ \
389         Function (ACPI_DEBUG_PARAMETERS, (Type) (Param)); \
390         return (Param); \
391     })
392 
393 #endif /* ACPI_SIMPLE_RETURN_MACROS */
394 
395 /* The actual exit macros */
396 
397 #define return_VOID \
398     ACPI_DO_WHILE0 ({ \
399         AcpiUtExit (ACPI_DEBUG_PARAMETERS); \
400         return; \
401     })
402 
403 #define return_ACPI_STATUS(Status) \
404     ACPI_TRACE_EXIT (AcpiUtStatusExit, ACPI_STATUS, Status)
405 
406 #define return_PTR(Pointer) \
407     ACPI_TRACE_EXIT (AcpiUtPtrExit, void *, Pointer)
408 
409 #define return_VALUE(Value) \
410     ACPI_TRACE_EXIT (AcpiUtValueExit, UINT64, Value)
411 
412 #define return_UINT32(Value) \
413     ACPI_TRACE_EXIT (AcpiUtValueExit, UINT32, Value)
414 
415 #define return_UINT8(Value) \
416     ACPI_TRACE_EXIT (AcpiUtValueExit, UINT8, Value)
417 
418 /* Conditional execution */
419 
420 #define ACPI_DEBUG_EXEC(a)              a
421 #define ACPI_DEBUG_ONLY_MEMBERS(a)      a;
422 #define _VERBOSE_STRUCTURES
423 
424 
425 /* Various object display routines for debug */
426 
427 #define ACPI_DUMP_STACK_ENTRY(a)        AcpiExDumpOperand((a), 0)
428 #define ACPI_DUMP_OPERANDS(a, b ,c)     AcpiExDumpOperands(a, b, c)
429 #define ACPI_DUMP_ENTRY(a, b)           AcpiNsDumpEntry (a, b)
430 #define ACPI_DUMP_PATHNAME(a, b, c, d)  AcpiNsDumpPathname(a, b, c, d)
431 #define ACPI_DUMP_BUFFER(a, b)          AcpiUtDebugDumpBuffer((UINT8 *) a, b, DB_BYTE_DISPLAY, _COMPONENT)
432 
433 #else /* ACPI_DEBUG_OUTPUT */
434 /*
435  * This is the non-debug case -- make everything go away,
436  * leaving no executable debug code!
437  */
438 #define ACPI_DEBUG_PRINT(pl)
439 #define ACPI_DEBUG_PRINT_RAW(pl)
440 #define ACPI_DEBUG_EXEC(a)
441 #define ACPI_DEBUG_ONLY_MEMBERS(a)
442 #define ACPI_FUNCTION_NAME(a)
443 #define ACPI_FUNCTION_TRACE(a)
444 #define ACPI_FUNCTION_TRACE_PTR(a, b)
445 #define ACPI_FUNCTION_TRACE_U32(a, b)
446 #define ACPI_FUNCTION_TRACE_STR(a, b)
447 #define ACPI_FUNCTION_ENTRY()
448 #define ACPI_DUMP_STACK_ENTRY(a)
449 #define ACPI_DUMP_OPERANDS(a, b, c)
450 #define ACPI_DUMP_ENTRY(a, b)
451 #define ACPI_DUMP_PATHNAME(a, b, c, d)
452 #define ACPI_DUMP_BUFFER(a, b)
453 #define ACPI_IS_DEBUG_ENABLED(Level, Component) 0
454 
455 /* Return macros must have a return statement at the minimum */
456 
457 #define return_VOID                     return
458 #define return_ACPI_STATUS(s)           return(s)
459 #define return_PTR(s)                   return(s)
460 #define return_VALUE(s)                 return(s)
461 #define return_UINT8(s)                 return(s)
462 #define return_UINT32(s)                return(s)
463 
464 #endif /* ACPI_DEBUG_OUTPUT */
465 
466 
467 #endif /* __ACOUTPUT_H__ */
468