1 /****************************************************************************** 2 * 3 * Module Name: utxface - External interfaces, miscellaneous utility functions 4 * 5 *****************************************************************************/ 6 7 /* 8 * Copyright (C) 2000 - 2016, Intel Corp. 9 * All rights reserved. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions, and the following disclaimer, 16 * without modification. 17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 18 * substantially similar to the "NO WARRANTY" disclaimer below 19 * ("Disclaimer") and any redistribution must be conditioned upon 20 * including a substantially similar Disclaimer requirement for further 21 * binary redistribution. 22 * 3. Neither the names of the above-listed copyright holders nor the names 23 * of any contributors may be used to endorse or promote products derived 24 * from this software without specific prior written permission. 25 * 26 * Alternatively, this software may be distributed under the terms of the 27 * GNU General Public License ("GPL") version 2 as published by the Free 28 * Software Foundation. 29 * 30 * NO WARRANTY 31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 41 * POSSIBILITY OF SUCH DAMAGES. 42 */ 43 44 #define EXPORT_ACPI_INTERFACES 45 46 #include <contrib/dev/acpica/include/acpi.h> 47 #include <contrib/dev/acpica/include/accommon.h> 48 #include <contrib/dev/acpica/include/acdebug.h> 49 50 #define _COMPONENT ACPI_UTILITIES 51 ACPI_MODULE_NAME ("utxface") 52 53 54 /******************************************************************************* 55 * 56 * FUNCTION: AcpiTerminate 57 * 58 * PARAMETERS: None 59 * 60 * RETURN: Status 61 * 62 * DESCRIPTION: Shutdown the ACPICA subsystem and release all resources. 63 * 64 ******************************************************************************/ 65 66 ACPI_STATUS ACPI_INIT_FUNCTION 67 AcpiTerminate ( 68 void) 69 { 70 ACPI_STATUS Status; 71 72 73 ACPI_FUNCTION_TRACE (AcpiTerminate); 74 75 76 /* Shutdown and free all resources */ 77 78 AcpiUtSubsystemShutdown (); 79 80 /* Free the mutex objects */ 81 82 AcpiUtMutexTerminate (); 83 84 /* Now we can shutdown the OS-dependent layer */ 85 86 Status = AcpiOsTerminate (); 87 return_ACPI_STATUS (Status); 88 } 89 90 ACPI_EXPORT_SYMBOL_INIT (AcpiTerminate) 91 92 93 #ifndef ACPI_ASL_COMPILER 94 /******************************************************************************* 95 * 96 * FUNCTION: AcpiSubsystemStatus 97 * 98 * PARAMETERS: None 99 * 100 * RETURN: Status of the ACPI subsystem 101 * 102 * DESCRIPTION: Other drivers that use the ACPI subsystem should call this 103 * before making any other calls, to ensure the subsystem 104 * initialized successfully. 105 * 106 ******************************************************************************/ 107 108 ACPI_STATUS 109 AcpiSubsystemStatus ( 110 void) 111 { 112 113 if (AcpiGbl_StartupFlags & ACPI_INITIALIZED_OK) 114 { 115 return (AE_OK); 116 } 117 else 118 { 119 return (AE_ERROR); 120 } 121 } 122 123 ACPI_EXPORT_SYMBOL (AcpiSubsystemStatus) 124 125 126 /******************************************************************************* 127 * 128 * FUNCTION: AcpiGetSystemInfo 129 * 130 * PARAMETERS: OutBuffer - A buffer to receive the resources for the 131 * device 132 * 133 * RETURN: Status - the status of the call 134 * 135 * DESCRIPTION: This function is called to get information about the current 136 * state of the ACPI subsystem. It will return system information 137 * in the OutBuffer. 138 * 139 * If the function fails an appropriate status will be returned 140 * and the value of OutBuffer is undefined. 141 * 142 ******************************************************************************/ 143 144 ACPI_STATUS 145 AcpiGetSystemInfo ( 146 ACPI_BUFFER *OutBuffer) 147 { 148 ACPI_SYSTEM_INFO *InfoPtr; 149 ACPI_STATUS Status; 150 151 152 ACPI_FUNCTION_TRACE (AcpiGetSystemInfo); 153 154 155 /* Parameter validation */ 156 157 Status = AcpiUtValidateBuffer (OutBuffer); 158 if (ACPI_FAILURE (Status)) 159 { 160 return_ACPI_STATUS (Status); 161 } 162 163 /* Validate/Allocate/Clear caller buffer */ 164 165 Status = AcpiUtInitializeBuffer (OutBuffer, sizeof (ACPI_SYSTEM_INFO)); 166 if (ACPI_FAILURE (Status)) 167 { 168 return_ACPI_STATUS (Status); 169 } 170 171 /* 172 * Populate the return buffer 173 */ 174 InfoPtr = (ACPI_SYSTEM_INFO *) OutBuffer->Pointer; 175 InfoPtr->AcpiCaVersion = ACPI_CA_VERSION; 176 177 /* System flags (ACPI capabilities) */ 178 179 InfoPtr->Flags = ACPI_SYS_MODE_ACPI; 180 181 /* Timer resolution - 24 or 32 bits */ 182 183 if (AcpiGbl_FADT.Flags & ACPI_FADT_32BIT_TIMER) 184 { 185 InfoPtr->TimerResolution = 24; 186 } 187 else 188 { 189 InfoPtr->TimerResolution = 32; 190 } 191 192 /* Clear the reserved fields */ 193 194 InfoPtr->Reserved1 = 0; 195 InfoPtr->Reserved2 = 0; 196 197 /* Current debug levels */ 198 199 InfoPtr->DebugLayer = AcpiDbgLayer; 200 InfoPtr->DebugLevel = AcpiDbgLevel; 201 202 return_ACPI_STATUS (AE_OK); 203 } 204 205 ACPI_EXPORT_SYMBOL (AcpiGetSystemInfo) 206 207 208 /******************************************************************************* 209 * 210 * FUNCTION: AcpiGetStatistics 211 * 212 * PARAMETERS: Stats - Where the statistics are returned 213 * 214 * RETURN: Status - the status of the call 215 * 216 * DESCRIPTION: Get the contents of the various system counters 217 * 218 ******************************************************************************/ 219 220 ACPI_STATUS 221 AcpiGetStatistics ( 222 ACPI_STATISTICS *Stats) 223 { 224 ACPI_FUNCTION_TRACE (AcpiGetStatistics); 225 226 227 /* Parameter validation */ 228 229 if (!Stats) 230 { 231 return_ACPI_STATUS (AE_BAD_PARAMETER); 232 } 233 234 /* Various interrupt-based event counters */ 235 236 Stats->SciCount = AcpiSciCount; 237 Stats->GpeCount = AcpiGpeCount; 238 239 memcpy (Stats->FixedEventCount, AcpiFixedEventCount, 240 sizeof (AcpiFixedEventCount)); 241 242 /* Other counters */ 243 244 Stats->MethodCount = AcpiMethodCount; 245 return_ACPI_STATUS (AE_OK); 246 } 247 248 ACPI_EXPORT_SYMBOL (AcpiGetStatistics) 249 250 251 /***************************************************************************** 252 * 253 * FUNCTION: AcpiInstallInitializationHandler 254 * 255 * PARAMETERS: Handler - Callback procedure 256 * Function - Not (currently) used, see below 257 * 258 * RETURN: Status 259 * 260 * DESCRIPTION: Install an initialization handler 261 * 262 * TBD: When a second function is added, must save the Function also. 263 * 264 ****************************************************************************/ 265 266 ACPI_STATUS 267 AcpiInstallInitializationHandler ( 268 ACPI_INIT_HANDLER Handler, 269 UINT32 Function) 270 { 271 272 if (!Handler) 273 { 274 return (AE_BAD_PARAMETER); 275 } 276 277 if (AcpiGbl_InitHandler) 278 { 279 return (AE_ALREADY_EXISTS); 280 } 281 282 AcpiGbl_InitHandler = Handler; 283 return (AE_OK); 284 } 285 286 ACPI_EXPORT_SYMBOL (AcpiInstallInitializationHandler) 287 288 289 /***************************************************************************** 290 * 291 * FUNCTION: AcpiPurgeCachedObjects 292 * 293 * PARAMETERS: None 294 * 295 * RETURN: Status 296 * 297 * DESCRIPTION: Empty all caches (delete the cached objects) 298 * 299 ****************************************************************************/ 300 301 ACPI_STATUS 302 AcpiPurgeCachedObjects ( 303 void) 304 { 305 ACPI_FUNCTION_TRACE (AcpiPurgeCachedObjects); 306 307 308 (void) AcpiOsPurgeCache (AcpiGbl_StateCache); 309 (void) AcpiOsPurgeCache (AcpiGbl_OperandCache); 310 (void) AcpiOsPurgeCache (AcpiGbl_PsNodeCache); 311 (void) AcpiOsPurgeCache (AcpiGbl_PsNodeExtCache); 312 313 return_ACPI_STATUS (AE_OK); 314 } 315 316 ACPI_EXPORT_SYMBOL (AcpiPurgeCachedObjects) 317 318 319 /***************************************************************************** 320 * 321 * FUNCTION: AcpiInstallInterface 322 * 323 * PARAMETERS: InterfaceName - The interface to install 324 * 325 * RETURN: Status 326 * 327 * DESCRIPTION: Install an _OSI interface to the global list 328 * 329 ****************************************************************************/ 330 331 ACPI_STATUS 332 AcpiInstallInterface ( 333 ACPI_STRING InterfaceName) 334 { 335 ACPI_STATUS Status; 336 ACPI_INTERFACE_INFO *InterfaceInfo; 337 338 339 /* Parameter validation */ 340 341 if (!InterfaceName || (strlen (InterfaceName) == 0)) 342 { 343 return (AE_BAD_PARAMETER); 344 } 345 346 Status = AcpiOsAcquireMutex (AcpiGbl_OsiMutex, ACPI_WAIT_FOREVER); 347 if (ACPI_FAILURE (Status)) 348 { 349 return (Status); 350 } 351 352 /* Check if the interface name is already in the global list */ 353 354 InterfaceInfo = AcpiUtGetInterface (InterfaceName); 355 if (InterfaceInfo) 356 { 357 /* 358 * The interface already exists in the list. This is OK if the 359 * interface has been marked invalid -- just clear the bit. 360 */ 361 if (InterfaceInfo->Flags & ACPI_OSI_INVALID) 362 { 363 InterfaceInfo->Flags &= ~ACPI_OSI_INVALID; 364 Status = AE_OK; 365 } 366 else 367 { 368 Status = AE_ALREADY_EXISTS; 369 } 370 } 371 else 372 { 373 /* New interface name, install into the global list */ 374 375 Status = AcpiUtInstallInterface (InterfaceName); 376 } 377 378 AcpiOsReleaseMutex (AcpiGbl_OsiMutex); 379 return (Status); 380 } 381 382 ACPI_EXPORT_SYMBOL (AcpiInstallInterface) 383 384 385 /***************************************************************************** 386 * 387 * FUNCTION: AcpiRemoveInterface 388 * 389 * PARAMETERS: InterfaceName - The interface to remove 390 * 391 * RETURN: Status 392 * 393 * DESCRIPTION: Remove an _OSI interface from the global list 394 * 395 ****************************************************************************/ 396 397 ACPI_STATUS 398 AcpiRemoveInterface ( 399 ACPI_STRING InterfaceName) 400 { 401 ACPI_STATUS Status; 402 403 404 /* Parameter validation */ 405 406 if (!InterfaceName || (strlen (InterfaceName) == 0)) 407 { 408 return (AE_BAD_PARAMETER); 409 } 410 411 Status = AcpiOsAcquireMutex (AcpiGbl_OsiMutex, ACPI_WAIT_FOREVER); 412 if (ACPI_FAILURE (Status)) 413 { 414 return (Status); 415 } 416 417 Status = AcpiUtRemoveInterface (InterfaceName); 418 419 AcpiOsReleaseMutex (AcpiGbl_OsiMutex); 420 return (Status); 421 } 422 423 ACPI_EXPORT_SYMBOL (AcpiRemoveInterface) 424 425 426 /***************************************************************************** 427 * 428 * FUNCTION: AcpiInstallInterfaceHandler 429 * 430 * PARAMETERS: Handler - The _OSI interface handler to install 431 * NULL means "remove existing handler" 432 * 433 * RETURN: Status 434 * 435 * DESCRIPTION: Install a handler for the predefined _OSI ACPI method. 436 * invoked during execution of the internal implementation of 437 * _OSI. A NULL handler simply removes any existing handler. 438 * 439 ****************************************************************************/ 440 441 ACPI_STATUS 442 AcpiInstallInterfaceHandler ( 443 ACPI_INTERFACE_HANDLER Handler) 444 { 445 ACPI_STATUS Status; 446 447 448 Status = AcpiOsAcquireMutex (AcpiGbl_OsiMutex, ACPI_WAIT_FOREVER); 449 if (ACPI_FAILURE (Status)) 450 { 451 return (Status); 452 } 453 454 if (Handler && AcpiGbl_InterfaceHandler) 455 { 456 Status = AE_ALREADY_EXISTS; 457 } 458 else 459 { 460 AcpiGbl_InterfaceHandler = Handler; 461 } 462 463 AcpiOsReleaseMutex (AcpiGbl_OsiMutex); 464 return (Status); 465 } 466 467 ACPI_EXPORT_SYMBOL (AcpiInstallInterfaceHandler) 468 469 470 /***************************************************************************** 471 * 472 * FUNCTION: AcpiUpdateInterfaces 473 * 474 * PARAMETERS: Action - Actions to be performed during the 475 * update 476 * 477 * RETURN: Status 478 * 479 * DESCRIPTION: Update _OSI interface strings, disabling or enabling OS vendor 480 * string or/and feature group strings. 481 * 482 ****************************************************************************/ 483 484 ACPI_STATUS 485 AcpiUpdateInterfaces ( 486 UINT8 Action) 487 { 488 ACPI_STATUS Status; 489 490 491 Status = AcpiOsAcquireMutex (AcpiGbl_OsiMutex, ACPI_WAIT_FOREVER); 492 if (ACPI_FAILURE (Status)) 493 { 494 return (Status); 495 } 496 497 Status = AcpiUtUpdateInterfaces (Action); 498 499 AcpiOsReleaseMutex (AcpiGbl_OsiMutex); 500 return (Status); 501 } 502 503 504 /***************************************************************************** 505 * 506 * FUNCTION: AcpiCheckAddressRange 507 * 508 * PARAMETERS: SpaceId - Address space ID 509 * Address - Start address 510 * Length - Length 511 * Warn - TRUE if warning on overlap desired 512 * 513 * RETURN: Count of the number of conflicts detected. 514 * 515 * DESCRIPTION: Check if the input address range overlaps any of the 516 * ASL operation region address ranges. 517 * 518 ****************************************************************************/ 519 520 UINT32 521 AcpiCheckAddressRange ( 522 ACPI_ADR_SPACE_TYPE SpaceId, 523 ACPI_PHYSICAL_ADDRESS Address, 524 ACPI_SIZE Length, 525 BOOLEAN Warn) 526 { 527 UINT32 Overlaps; 528 ACPI_STATUS Status; 529 530 531 Status = AcpiUtAcquireMutex (ACPI_MTX_NAMESPACE); 532 if (ACPI_FAILURE (Status)) 533 { 534 return (0); 535 } 536 537 Overlaps = AcpiUtCheckAddressRange (SpaceId, Address, 538 (UINT32) Length, Warn); 539 540 (void) AcpiUtReleaseMutex (ACPI_MTX_NAMESPACE); 541 return (Overlaps); 542 } 543 544 ACPI_EXPORT_SYMBOL (AcpiCheckAddressRange) 545 546 #endif /* !ACPI_ASL_COMPILER */ 547 548 549 /******************************************************************************* 550 * 551 * FUNCTION: AcpiDecodePldBuffer 552 * 553 * PARAMETERS: InBuffer - Buffer returned by _PLD method 554 * Length - Length of the InBuffer 555 * ReturnBuffer - Where the decode buffer is returned 556 * 557 * RETURN: Status and the decoded _PLD buffer. User must deallocate 558 * the buffer via ACPI_FREE. 559 * 560 * DESCRIPTION: Decode the bit-packed buffer returned by the _PLD method into 561 * a local struct that is much more useful to an ACPI driver. 562 * 563 ******************************************************************************/ 564 565 ACPI_STATUS 566 AcpiDecodePldBuffer ( 567 UINT8 *InBuffer, 568 ACPI_SIZE Length, 569 ACPI_PLD_INFO **ReturnBuffer) 570 { 571 ACPI_PLD_INFO *PldInfo; 572 UINT32 *Buffer = ACPI_CAST_PTR (UINT32, InBuffer); 573 UINT32 Dword; 574 575 576 /* Parameter validation */ 577 578 if (!InBuffer || !ReturnBuffer || (Length < ACPI_PLD_REV1_BUFFER_SIZE)) 579 { 580 return (AE_BAD_PARAMETER); 581 } 582 583 PldInfo = ACPI_ALLOCATE_ZEROED (sizeof (ACPI_PLD_INFO)); 584 if (!PldInfo) 585 { 586 return (AE_NO_MEMORY); 587 } 588 589 /* First 32-bit DWord */ 590 591 ACPI_MOVE_32_TO_32 (&Dword, &Buffer[0]); 592 PldInfo->Revision = ACPI_PLD_GET_REVISION (&Dword); 593 PldInfo->IgnoreColor = ACPI_PLD_GET_IGNORE_COLOR (&Dword); 594 PldInfo->Red = ACPI_PLD_GET_RED (&Dword); 595 PldInfo->Green = ACPI_PLD_GET_GREEN (&Dword); 596 PldInfo->Blue = ACPI_PLD_GET_BLUE (&Dword); 597 598 /* Second 32-bit DWord */ 599 600 ACPI_MOVE_32_TO_32 (&Dword, &Buffer[1]); 601 PldInfo->Width = ACPI_PLD_GET_WIDTH (&Dword); 602 PldInfo->Height = ACPI_PLD_GET_HEIGHT(&Dword); 603 604 /* Third 32-bit DWord */ 605 606 ACPI_MOVE_32_TO_32 (&Dword, &Buffer[2]); 607 PldInfo->UserVisible = ACPI_PLD_GET_USER_VISIBLE (&Dword); 608 PldInfo->Dock = ACPI_PLD_GET_DOCK (&Dword); 609 PldInfo->Lid = ACPI_PLD_GET_LID (&Dword); 610 PldInfo->Panel = ACPI_PLD_GET_PANEL (&Dword); 611 PldInfo->VerticalPosition = ACPI_PLD_GET_VERTICAL (&Dword); 612 PldInfo->HorizontalPosition = ACPI_PLD_GET_HORIZONTAL (&Dword); 613 PldInfo->Shape = ACPI_PLD_GET_SHAPE (&Dword); 614 PldInfo->GroupOrientation = ACPI_PLD_GET_ORIENTATION (&Dword); 615 PldInfo->GroupToken = ACPI_PLD_GET_TOKEN (&Dword); 616 PldInfo->GroupPosition = ACPI_PLD_GET_POSITION (&Dword); 617 PldInfo->Bay = ACPI_PLD_GET_BAY (&Dword); 618 619 /* Fourth 32-bit DWord */ 620 621 ACPI_MOVE_32_TO_32 (&Dword, &Buffer[3]); 622 PldInfo->Ejectable = ACPI_PLD_GET_EJECTABLE (&Dword); 623 PldInfo->OspmEjectRequired = ACPI_PLD_GET_OSPM_EJECT (&Dword); 624 PldInfo->CabinetNumber = ACPI_PLD_GET_CABINET (&Dword); 625 PldInfo->CardCageNumber = ACPI_PLD_GET_CARD_CAGE (&Dword); 626 PldInfo->Reference = ACPI_PLD_GET_REFERENCE (&Dword); 627 PldInfo->Rotation = ACPI_PLD_GET_ROTATION (&Dword); 628 PldInfo->Order = ACPI_PLD_GET_ORDER (&Dword); 629 630 if (Length >= ACPI_PLD_REV2_BUFFER_SIZE) 631 { 632 /* Fifth 32-bit DWord (Revision 2 of _PLD) */ 633 634 ACPI_MOVE_32_TO_32 (&Dword, &Buffer[4]); 635 PldInfo->VerticalOffset = ACPI_PLD_GET_VERT_OFFSET (&Dword); 636 PldInfo->HorizontalOffset = ACPI_PLD_GET_HORIZ_OFFSET (&Dword); 637 } 638 639 *ReturnBuffer = PldInfo; 640 return (AE_OK); 641 } 642 643 ACPI_EXPORT_SYMBOL (AcpiDecodePldBuffer) 644