1 /****************************************************************************** 2 * 3 * Module Name: utids - support for device IDs - HID, UID, CID, SUB, CLS 4 * 5 *****************************************************************************/ 6 7 /* 8 * Copyright (C) 2000 - 2016, Intel Corp. 9 * All rights reserved. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions, and the following disclaimer, 16 * without modification. 17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 18 * substantially similar to the "NO WARRANTY" disclaimer below 19 * ("Disclaimer") and any redistribution must be conditioned upon 20 * including a substantially similar Disclaimer requirement for further 21 * binary redistribution. 22 * 3. Neither the names of the above-listed copyright holders nor the names 23 * of any contributors may be used to endorse or promote products derived 24 * from this software without specific prior written permission. 25 * 26 * Alternatively, this software may be distributed under the terms of the 27 * GNU General Public License ("GPL") version 2 as published by the Free 28 * Software Foundation. 29 * 30 * NO WARRANTY 31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 41 * POSSIBILITY OF SUCH DAMAGES. 42 */ 43 44 #include <contrib/dev/acpica/include/acpi.h> 45 #include <contrib/dev/acpica/include/accommon.h> 46 #include <contrib/dev/acpica/include/acinterp.h> 47 48 49 #define _COMPONENT ACPI_UTILITIES 50 ACPI_MODULE_NAME ("utids") 51 52 53 /******************************************************************************* 54 * 55 * FUNCTION: AcpiUtExecute_HID 56 * 57 * PARAMETERS: DeviceNode - Node for the device 58 * ReturnId - Where the string HID is returned 59 * 60 * RETURN: Status 61 * 62 * DESCRIPTION: Executes the _HID control method that returns the hardware 63 * ID of the device. The HID is either an 32-bit encoded EISAID 64 * Integer or a String. A string is always returned. An EISAID 65 * is converted to a string. 66 * 67 * NOTE: Internal function, no parameter validation 68 * 69 ******************************************************************************/ 70 71 ACPI_STATUS 72 AcpiUtExecute_HID ( 73 ACPI_NAMESPACE_NODE *DeviceNode, 74 ACPI_PNP_DEVICE_ID **ReturnId) 75 { 76 ACPI_OPERAND_OBJECT *ObjDesc; 77 ACPI_PNP_DEVICE_ID *Hid; 78 UINT32 Length; 79 ACPI_STATUS Status; 80 81 82 ACPI_FUNCTION_TRACE (UtExecute_HID); 83 84 85 Status = AcpiUtEvaluateObject (DeviceNode, METHOD_NAME__HID, 86 ACPI_BTYPE_INTEGER | ACPI_BTYPE_STRING, &ObjDesc); 87 if (ACPI_FAILURE (Status)) 88 { 89 return_ACPI_STATUS (Status); 90 } 91 92 /* Get the size of the String to be returned, includes null terminator */ 93 94 if (ObjDesc->Common.Type == ACPI_TYPE_INTEGER) 95 { 96 Length = ACPI_EISAID_STRING_SIZE; 97 } 98 else 99 { 100 Length = ObjDesc->String.Length + 1; 101 } 102 103 /* Allocate a buffer for the HID */ 104 105 Hid = ACPI_ALLOCATE_ZEROED ( 106 sizeof (ACPI_PNP_DEVICE_ID) + (ACPI_SIZE) Length); 107 if (!Hid) 108 { 109 Status = AE_NO_MEMORY; 110 goto Cleanup; 111 } 112 113 /* Area for the string starts after PNP_DEVICE_ID struct */ 114 115 Hid->String = ACPI_ADD_PTR (char, Hid, sizeof (ACPI_PNP_DEVICE_ID)); 116 117 /* Convert EISAID to a string or simply copy existing string */ 118 119 if (ObjDesc->Common.Type == ACPI_TYPE_INTEGER) 120 { 121 AcpiExEisaIdToString (Hid->String, ObjDesc->Integer.Value); 122 } 123 else 124 { 125 strcpy (Hid->String, ObjDesc->String.Pointer); 126 } 127 128 Hid->Length = Length; 129 *ReturnId = Hid; 130 131 132 Cleanup: 133 134 /* On exit, we must delete the return object */ 135 136 AcpiUtRemoveReference (ObjDesc); 137 return_ACPI_STATUS (Status); 138 } 139 140 141 /******************************************************************************* 142 * 143 * FUNCTION: AcpiUtExecute_UID 144 * 145 * PARAMETERS: DeviceNode - Node for the device 146 * ReturnId - Where the string UID is returned 147 * 148 * RETURN: Status 149 * 150 * DESCRIPTION: Executes the _UID control method that returns the unique 151 * ID of the device. The UID is either a 64-bit Integer (NOT an 152 * EISAID) or a string. Always returns a string. A 64-bit integer 153 * is converted to a decimal string. 154 * 155 * NOTE: Internal function, no parameter validation 156 * 157 ******************************************************************************/ 158 159 ACPI_STATUS 160 AcpiUtExecute_UID ( 161 ACPI_NAMESPACE_NODE *DeviceNode, 162 ACPI_PNP_DEVICE_ID **ReturnId) 163 { 164 ACPI_OPERAND_OBJECT *ObjDesc; 165 ACPI_PNP_DEVICE_ID *Uid; 166 UINT32 Length; 167 ACPI_STATUS Status; 168 169 170 ACPI_FUNCTION_TRACE (UtExecute_UID); 171 172 173 Status = AcpiUtEvaluateObject (DeviceNode, METHOD_NAME__UID, 174 ACPI_BTYPE_INTEGER | ACPI_BTYPE_STRING, &ObjDesc); 175 if (ACPI_FAILURE (Status)) 176 { 177 return_ACPI_STATUS (Status); 178 } 179 180 /* Get the size of the String to be returned, includes null terminator */ 181 182 if (ObjDesc->Common.Type == ACPI_TYPE_INTEGER) 183 { 184 Length = ACPI_MAX64_DECIMAL_DIGITS + 1; 185 } 186 else 187 { 188 Length = ObjDesc->String.Length + 1; 189 } 190 191 /* Allocate a buffer for the UID */ 192 193 Uid = ACPI_ALLOCATE_ZEROED ( 194 sizeof (ACPI_PNP_DEVICE_ID) + (ACPI_SIZE) Length); 195 if (!Uid) 196 { 197 Status = AE_NO_MEMORY; 198 goto Cleanup; 199 } 200 201 /* Area for the string starts after PNP_DEVICE_ID struct */ 202 203 Uid->String = ACPI_ADD_PTR (char, Uid, sizeof (ACPI_PNP_DEVICE_ID)); 204 205 /* Convert an Integer to string, or just copy an existing string */ 206 207 if (ObjDesc->Common.Type == ACPI_TYPE_INTEGER) 208 { 209 AcpiExIntegerToString (Uid->String, ObjDesc->Integer.Value); 210 } 211 else 212 { 213 strcpy (Uid->String, ObjDesc->String.Pointer); 214 } 215 216 Uid->Length = Length; 217 *ReturnId = Uid; 218 219 220 Cleanup: 221 222 /* On exit, we must delete the return object */ 223 224 AcpiUtRemoveReference (ObjDesc); 225 return_ACPI_STATUS (Status); 226 } 227 228 229 /******************************************************************************* 230 * 231 * FUNCTION: AcpiUtExecute_CID 232 * 233 * PARAMETERS: DeviceNode - Node for the device 234 * ReturnCidList - Where the CID list is returned 235 * 236 * RETURN: Status, list of CID strings 237 * 238 * DESCRIPTION: Executes the _CID control method that returns one or more 239 * compatible hardware IDs for the device. 240 * 241 * NOTE: Internal function, no parameter validation 242 * 243 * A _CID method can return either a single compatible ID or a package of 244 * compatible IDs. Each compatible ID can be one of the following: 245 * 1) Integer (32 bit compressed EISA ID) or 246 * 2) String (PCI ID format, e.g. "PCI\VEN_vvvv&DEV_dddd&SUBSYS_ssssssss") 247 * 248 * The Integer CIDs are converted to string format by this function. 249 * 250 ******************************************************************************/ 251 252 ACPI_STATUS 253 AcpiUtExecute_CID ( 254 ACPI_NAMESPACE_NODE *DeviceNode, 255 ACPI_PNP_DEVICE_ID_LIST **ReturnCidList) 256 { 257 ACPI_OPERAND_OBJECT **CidObjects; 258 ACPI_OPERAND_OBJECT *ObjDesc; 259 ACPI_PNP_DEVICE_ID_LIST *CidList; 260 char *NextIdString; 261 UINT32 StringAreaSize; 262 UINT32 Length; 263 UINT32 CidListSize; 264 ACPI_STATUS Status; 265 UINT32 Count; 266 UINT32 i; 267 268 269 ACPI_FUNCTION_TRACE (UtExecute_CID); 270 271 272 /* Evaluate the _CID method for this device */ 273 274 Status = AcpiUtEvaluateObject (DeviceNode, METHOD_NAME__CID, 275 ACPI_BTYPE_INTEGER | ACPI_BTYPE_STRING | ACPI_BTYPE_PACKAGE, 276 &ObjDesc); 277 if (ACPI_FAILURE (Status)) 278 { 279 return_ACPI_STATUS (Status); 280 } 281 282 /* 283 * Get the count and size of the returned _CIDs. _CID can return either 284 * a Package of Integers/Strings or a single Integer or String. 285 * Note: This section also validates that all CID elements are of the 286 * correct type (Integer or String). 287 */ 288 if (ObjDesc->Common.Type == ACPI_TYPE_PACKAGE) 289 { 290 Count = ObjDesc->Package.Count; 291 CidObjects = ObjDesc->Package.Elements; 292 } 293 else /* Single Integer or String CID */ 294 { 295 Count = 1; 296 CidObjects = &ObjDesc; 297 } 298 299 StringAreaSize = 0; 300 for (i = 0; i < Count; i++) 301 { 302 /* String lengths include null terminator */ 303 304 switch (CidObjects[i]->Common.Type) 305 { 306 case ACPI_TYPE_INTEGER: 307 308 StringAreaSize += ACPI_EISAID_STRING_SIZE; 309 break; 310 311 case ACPI_TYPE_STRING: 312 313 StringAreaSize += CidObjects[i]->String.Length + 1; 314 break; 315 316 default: 317 318 Status = AE_TYPE; 319 goto Cleanup; 320 } 321 } 322 323 /* 324 * Now that we know the length of the CIDs, allocate return buffer: 325 * 1) Size of the base structure + 326 * 2) Size of the CID PNP_DEVICE_ID array + 327 * 3) Size of the actual CID strings 328 */ 329 CidListSize = sizeof (ACPI_PNP_DEVICE_ID_LIST) + 330 ((Count - 1) * sizeof (ACPI_PNP_DEVICE_ID)) + 331 StringAreaSize; 332 333 CidList = ACPI_ALLOCATE_ZEROED (CidListSize); 334 if (!CidList) 335 { 336 Status = AE_NO_MEMORY; 337 goto Cleanup; 338 } 339 340 /* Area for CID strings starts after the CID PNP_DEVICE_ID array */ 341 342 NextIdString = ACPI_CAST_PTR (char, CidList->Ids) + 343 ((ACPI_SIZE) Count * sizeof (ACPI_PNP_DEVICE_ID)); 344 345 /* Copy/convert the CIDs to the return buffer */ 346 347 for (i = 0; i < Count; i++) 348 { 349 if (CidObjects[i]->Common.Type == ACPI_TYPE_INTEGER) 350 { 351 /* Convert the Integer (EISAID) CID to a string */ 352 353 AcpiExEisaIdToString ( 354 NextIdString, CidObjects[i]->Integer.Value); 355 Length = ACPI_EISAID_STRING_SIZE; 356 } 357 else /* ACPI_TYPE_STRING */ 358 { 359 /* Copy the String CID from the returned object */ 360 361 strcpy (NextIdString, CidObjects[i]->String.Pointer); 362 Length = CidObjects[i]->String.Length + 1; 363 } 364 365 CidList->Ids[i].String = NextIdString; 366 CidList->Ids[i].Length = Length; 367 NextIdString += Length; 368 } 369 370 /* Finish the CID list */ 371 372 CidList->Count = Count; 373 CidList->ListSize = CidListSize; 374 *ReturnCidList = CidList; 375 376 377 Cleanup: 378 379 /* On exit, we must delete the _CID return object */ 380 381 AcpiUtRemoveReference (ObjDesc); 382 return_ACPI_STATUS (Status); 383 } 384 385 386 /******************************************************************************* 387 * 388 * FUNCTION: AcpiUtExecute_CLS 389 * 390 * PARAMETERS: DeviceNode - Node for the device 391 * ReturnId - Where the _CLS is returned 392 * 393 * RETURN: Status 394 * 395 * DESCRIPTION: Executes the _CLS control method that returns PCI-defined 396 * class code of the device. The _CLS value is always a package 397 * containing PCI class information as a list of integers. 398 * The returned string has format "BBSSPP", where: 399 * BB = Base-class code 400 * SS = Sub-class code 401 * PP = Programming Interface code 402 * 403 ******************************************************************************/ 404 405 ACPI_STATUS 406 AcpiUtExecute_CLS ( 407 ACPI_NAMESPACE_NODE *DeviceNode, 408 ACPI_PNP_DEVICE_ID **ReturnId) 409 { 410 ACPI_OPERAND_OBJECT *ObjDesc; 411 ACPI_OPERAND_OBJECT **ClsObjects; 412 UINT32 Count; 413 ACPI_PNP_DEVICE_ID *Cls; 414 UINT32 Length; 415 ACPI_STATUS Status; 416 UINT8 ClassCode[3] = {0, 0, 0}; 417 418 419 ACPI_FUNCTION_TRACE (UtExecute_CLS); 420 421 422 Status = AcpiUtEvaluateObject (DeviceNode, METHOD_NAME__CLS, 423 ACPI_BTYPE_PACKAGE, &ObjDesc); 424 if (ACPI_FAILURE (Status)) 425 { 426 return_ACPI_STATUS (Status); 427 } 428 429 /* Get the size of the String to be returned, includes null terminator */ 430 431 Length = ACPI_PCICLS_STRING_SIZE; 432 ClsObjects = ObjDesc->Package.Elements; 433 Count = ObjDesc->Package.Count; 434 435 if (ObjDesc->Common.Type == ACPI_TYPE_PACKAGE) 436 { 437 if (Count > 0 && ClsObjects[0]->Common.Type == ACPI_TYPE_INTEGER) 438 { 439 ClassCode[0] = (UINT8) ClsObjects[0]->Integer.Value; 440 } 441 if (Count > 1 && ClsObjects[1]->Common.Type == ACPI_TYPE_INTEGER) 442 { 443 ClassCode[1] = (UINT8) ClsObjects[1]->Integer.Value; 444 } 445 if (Count > 2 && ClsObjects[2]->Common.Type == ACPI_TYPE_INTEGER) 446 { 447 ClassCode[2] = (UINT8) ClsObjects[2]->Integer.Value; 448 } 449 } 450 451 /* Allocate a buffer for the CLS */ 452 453 Cls = ACPI_ALLOCATE_ZEROED ( 454 sizeof (ACPI_PNP_DEVICE_ID) + (ACPI_SIZE) Length); 455 if (!Cls) 456 { 457 Status = AE_NO_MEMORY; 458 goto Cleanup; 459 } 460 461 /* Area for the string starts after PNP_DEVICE_ID struct */ 462 463 Cls->String = ACPI_ADD_PTR (char, Cls, sizeof (ACPI_PNP_DEVICE_ID)); 464 465 /* Simply copy existing string */ 466 467 AcpiExPciClsToString (Cls->String, ClassCode); 468 Cls->Length = Length; 469 *ReturnId = Cls; 470 471 472 Cleanup: 473 474 /* On exit, we must delete the return object */ 475 476 AcpiUtRemoveReference (ObjDesc); 477 return_ACPI_STATUS (Status); 478 } 479