1 /****************************************************************************** 2 * 3 * Module Name: uteval - Object evaluation 4 * 5 *****************************************************************************/ 6 7 /* 8 * Copyright (C) 2000 - 2015, Intel Corp. 9 * All rights reserved. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions, and the following disclaimer, 16 * without modification. 17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 18 * substantially similar to the "NO WARRANTY" disclaimer below 19 * ("Disclaimer") and any redistribution must be conditioned upon 20 * including a substantially similar Disclaimer requirement for further 21 * binary redistribution. 22 * 3. Neither the names of the above-listed copyright holders nor the names 23 * of any contributors may be used to endorse or promote products derived 24 * from this software without specific prior written permission. 25 * 26 * Alternatively, this software may be distributed under the terms of the 27 * GNU General Public License ("GPL") version 2 as published by the Free 28 * Software Foundation. 29 * 30 * NO WARRANTY 31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 41 * POSSIBILITY OF SUCH DAMAGES. 42 */ 43 44 #include <contrib/dev/acpica/include/acpi.h> 45 #include <contrib/dev/acpica/include/accommon.h> 46 #include <contrib/dev/acpica/include/acnamesp.h> 47 48 49 #define _COMPONENT ACPI_UTILITIES 50 ACPI_MODULE_NAME ("uteval") 51 52 53 /******************************************************************************* 54 * 55 * FUNCTION: AcpiUtEvaluateObject 56 * 57 * PARAMETERS: PrefixNode - Starting node 58 * Path - Path to object from starting node 59 * ExpectedReturnTypes - Bitmap of allowed return types 60 * ReturnDesc - Where a return value is stored 61 * 62 * RETURN: Status 63 * 64 * DESCRIPTION: Evaluates a namespace object and verifies the type of the 65 * return object. Common code that simplifies accessing objects 66 * that have required return objects of fixed types. 67 * 68 * NOTE: Internal function, no parameter validation 69 * 70 ******************************************************************************/ 71 72 ACPI_STATUS 73 AcpiUtEvaluateObject ( 74 ACPI_NAMESPACE_NODE *PrefixNode, 75 char *Path, 76 UINT32 ExpectedReturnBtypes, 77 ACPI_OPERAND_OBJECT **ReturnDesc) 78 { 79 ACPI_EVALUATE_INFO *Info; 80 ACPI_STATUS Status; 81 UINT32 ReturnBtype; 82 83 84 ACPI_FUNCTION_TRACE (UtEvaluateObject); 85 86 87 /* Allocate the evaluation information block */ 88 89 Info = ACPI_ALLOCATE_ZEROED (sizeof (ACPI_EVALUATE_INFO)); 90 if (!Info) 91 { 92 return_ACPI_STATUS (AE_NO_MEMORY); 93 } 94 95 Info->PrefixNode = PrefixNode; 96 Info->RelativePathname = Path; 97 98 /* Evaluate the object/method */ 99 100 Status = AcpiNsEvaluate (Info); 101 if (ACPI_FAILURE (Status)) 102 { 103 if (Status == AE_NOT_FOUND) 104 { 105 ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "[%4.4s.%s] was not found\n", 106 AcpiUtGetNodeName (PrefixNode), Path)); 107 } 108 else 109 { 110 ACPI_ERROR_METHOD ("Method execution failed", 111 PrefixNode, Path, Status); 112 } 113 114 goto Cleanup; 115 } 116 117 /* Did we get a return object? */ 118 119 if (!Info->ReturnObject) 120 { 121 if (ExpectedReturnBtypes) 122 { 123 ACPI_ERROR_METHOD ("No object was returned from", 124 PrefixNode, Path, AE_NOT_EXIST); 125 126 Status = AE_NOT_EXIST; 127 } 128 129 goto Cleanup; 130 } 131 132 /* Map the return object type to the bitmapped type */ 133 134 switch ((Info->ReturnObject)->Common.Type) 135 { 136 case ACPI_TYPE_INTEGER: 137 138 ReturnBtype = ACPI_BTYPE_INTEGER; 139 break; 140 141 case ACPI_TYPE_BUFFER: 142 143 ReturnBtype = ACPI_BTYPE_BUFFER; 144 break; 145 146 case ACPI_TYPE_STRING: 147 148 ReturnBtype = ACPI_BTYPE_STRING; 149 break; 150 151 case ACPI_TYPE_PACKAGE: 152 153 ReturnBtype = ACPI_BTYPE_PACKAGE; 154 break; 155 156 default: 157 158 ReturnBtype = 0; 159 break; 160 } 161 162 if ((AcpiGbl_EnableInterpreterSlack) && 163 (!ExpectedReturnBtypes)) 164 { 165 /* 166 * We received a return object, but one was not expected. This can 167 * happen frequently if the "implicit return" feature is enabled. 168 * Just delete the return object and return AE_OK. 169 */ 170 AcpiUtRemoveReference (Info->ReturnObject); 171 goto Cleanup; 172 } 173 174 /* Is the return object one of the expected types? */ 175 176 if (!(ExpectedReturnBtypes & ReturnBtype)) 177 { 178 ACPI_ERROR_METHOD ("Return object type is incorrect", 179 PrefixNode, Path, AE_TYPE); 180 181 ACPI_ERROR ((AE_INFO, 182 "Type returned from %s was incorrect: %s, expected Btypes: 0x%X", 183 Path, AcpiUtGetObjectTypeName (Info->ReturnObject), 184 ExpectedReturnBtypes)); 185 186 /* On error exit, we must delete the return object */ 187 188 AcpiUtRemoveReference (Info->ReturnObject); 189 Status = AE_TYPE; 190 goto Cleanup; 191 } 192 193 /* Object type is OK, return it */ 194 195 *ReturnDesc = Info->ReturnObject; 196 197 Cleanup: 198 ACPI_FREE (Info); 199 return_ACPI_STATUS (Status); 200 } 201 202 203 /******************************************************************************* 204 * 205 * FUNCTION: AcpiUtEvaluateNumericObject 206 * 207 * PARAMETERS: ObjectName - Object name to be evaluated 208 * DeviceNode - Node for the device 209 * Value - Where the value is returned 210 * 211 * RETURN: Status 212 * 213 * DESCRIPTION: Evaluates a numeric namespace object for a selected device 214 * and stores result in *Value. 215 * 216 * NOTE: Internal function, no parameter validation 217 * 218 ******************************************************************************/ 219 220 ACPI_STATUS 221 AcpiUtEvaluateNumericObject ( 222 char *ObjectName, 223 ACPI_NAMESPACE_NODE *DeviceNode, 224 UINT64 *Value) 225 { 226 ACPI_OPERAND_OBJECT *ObjDesc; 227 ACPI_STATUS Status; 228 229 230 ACPI_FUNCTION_TRACE (UtEvaluateNumericObject); 231 232 233 Status = AcpiUtEvaluateObject (DeviceNode, ObjectName, 234 ACPI_BTYPE_INTEGER, &ObjDesc); 235 if (ACPI_FAILURE (Status)) 236 { 237 return_ACPI_STATUS (Status); 238 } 239 240 /* Get the returned Integer */ 241 242 *Value = ObjDesc->Integer.Value; 243 244 /* On exit, we must delete the return object */ 245 246 AcpiUtRemoveReference (ObjDesc); 247 return_ACPI_STATUS (Status); 248 } 249 250 251 /******************************************************************************* 252 * 253 * FUNCTION: AcpiUtExecute_STA 254 * 255 * PARAMETERS: DeviceNode - Node for the device 256 * Flags - Where the status flags are returned 257 * 258 * RETURN: Status 259 * 260 * DESCRIPTION: Executes _STA for selected device and stores results in 261 * *Flags. If _STA does not exist, then the device is assumed 262 * to be present/functional/enabled (as per the ACPI spec). 263 * 264 * NOTE: Internal function, no parameter validation 265 * 266 ******************************************************************************/ 267 268 ACPI_STATUS 269 AcpiUtExecute_STA ( 270 ACPI_NAMESPACE_NODE *DeviceNode, 271 UINT32 *Flags) 272 { 273 ACPI_OPERAND_OBJECT *ObjDesc; 274 ACPI_STATUS Status; 275 276 277 ACPI_FUNCTION_TRACE (UtExecute_STA); 278 279 280 Status = AcpiUtEvaluateObject (DeviceNode, METHOD_NAME__STA, 281 ACPI_BTYPE_INTEGER, &ObjDesc); 282 if (ACPI_FAILURE (Status)) 283 { 284 if (AE_NOT_FOUND == Status) 285 { 286 /* 287 * if _STA does not exist, then (as per the ACPI specification), 288 * the returned flags will indicate that the device is present, 289 * functional, and enabled. 290 */ 291 ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, 292 "_STA on %4.4s was not found, assuming device is present\n", 293 AcpiUtGetNodeName (DeviceNode))); 294 295 *Flags = ACPI_UINT32_MAX; 296 Status = AE_OK; 297 } 298 299 return_ACPI_STATUS (Status); 300 } 301 302 /* Extract the status flags */ 303 304 *Flags = (UINT32) ObjDesc->Integer.Value; 305 306 /* On exit, we must delete the return object */ 307 308 AcpiUtRemoveReference (ObjDesc); 309 return_ACPI_STATUS (Status); 310 } 311 312 313 /******************************************************************************* 314 * 315 * FUNCTION: AcpiUtExecutePowerMethods 316 * 317 * PARAMETERS: DeviceNode - Node for the device 318 * MethodNames - Array of power method names 319 * MethodCount - Number of methods to execute 320 * OutValues - Where the power method values are returned 321 * 322 * RETURN: Status, OutValues 323 * 324 * DESCRIPTION: Executes the specified power methods for the device and returns 325 * the result(s). 326 * 327 * NOTE: Internal function, no parameter validation 328 * 329 ******************************************************************************/ 330 331 ACPI_STATUS 332 AcpiUtExecutePowerMethods ( 333 ACPI_NAMESPACE_NODE *DeviceNode, 334 const char **MethodNames, 335 UINT8 MethodCount, 336 UINT8 *OutValues) 337 { 338 ACPI_OPERAND_OBJECT *ObjDesc; 339 ACPI_STATUS Status; 340 ACPI_STATUS FinalStatus = AE_NOT_FOUND; 341 UINT32 i; 342 343 344 ACPI_FUNCTION_TRACE (UtExecutePowerMethods); 345 346 347 for (i = 0; i < MethodCount; i++) 348 { 349 /* 350 * Execute the power method (_SxD or _SxW). The only allowable 351 * return type is an Integer. 352 */ 353 Status = AcpiUtEvaluateObject (DeviceNode, 354 ACPI_CAST_PTR (char, MethodNames[i]), 355 ACPI_BTYPE_INTEGER, &ObjDesc); 356 if (ACPI_SUCCESS (Status)) 357 { 358 OutValues[i] = (UINT8) ObjDesc->Integer.Value; 359 360 /* Delete the return object */ 361 362 AcpiUtRemoveReference (ObjDesc); 363 FinalStatus = AE_OK; /* At least one value is valid */ 364 continue; 365 } 366 367 OutValues[i] = ACPI_UINT8_MAX; 368 if (Status == AE_NOT_FOUND) 369 { 370 continue; /* Ignore if not found */ 371 } 372 373 ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "Failed %s on Device %4.4s, %s\n", 374 ACPI_CAST_PTR (char, MethodNames[i]), 375 AcpiUtGetNodeName (DeviceNode), AcpiFormatException (Status))); 376 } 377 378 return_ACPI_STATUS (FinalStatus); 379 } 380