1 /****************************************************************************** 2 * 3 * Module Name: utaddress - OpRegion address range check 4 * 5 *****************************************************************************/ 6 7 /* 8 * Copyright (C) 2000 - 2015, Intel Corp. 9 * All rights reserved. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions, and the following disclaimer, 16 * without modification. 17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 18 * substantially similar to the "NO WARRANTY" disclaimer below 19 * ("Disclaimer") and any redistribution must be conditioned upon 20 * including a substantially similar Disclaimer requirement for further 21 * binary redistribution. 22 * 3. Neither the names of the above-listed copyright holders nor the names 23 * of any contributors may be used to endorse or promote products derived 24 * from this software without specific prior written permission. 25 * 26 * Alternatively, this software may be distributed under the terms of the 27 * GNU General Public License ("GPL") version 2 as published by the Free 28 * Software Foundation. 29 * 30 * NO WARRANTY 31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 41 * POSSIBILITY OF SUCH DAMAGES. 42 */ 43 44 #include <contrib/dev/acpica/include/acpi.h> 45 #include <contrib/dev/acpica/include/accommon.h> 46 #include <contrib/dev/acpica/include/acnamesp.h> 47 48 49 #define _COMPONENT ACPI_UTILITIES 50 ACPI_MODULE_NAME ("utaddress") 51 52 53 /******************************************************************************* 54 * 55 * FUNCTION: AcpiUtAddAddressRange 56 * 57 * PARAMETERS: SpaceId - Address space ID 58 * Address - OpRegion start address 59 * Length - OpRegion length 60 * RegionNode - OpRegion namespace node 61 * 62 * RETURN: Status 63 * 64 * DESCRIPTION: Add the Operation Region address range to the global list. 65 * The only supported Space IDs are Memory and I/O. Called when 66 * the OpRegion address/length operands are fully evaluated. 67 * 68 * MUTEX: Locks the namespace 69 * 70 * NOTE: Because this interface is only called when an OpRegion argument 71 * list is evaluated, there cannot be any duplicate RegionNodes. 72 * Duplicate Address/Length values are allowed, however, so that multiple 73 * address conflicts can be detected. 74 * 75 ******************************************************************************/ 76 77 ACPI_STATUS 78 AcpiUtAddAddressRange ( 79 ACPI_ADR_SPACE_TYPE SpaceId, 80 ACPI_PHYSICAL_ADDRESS Address, 81 UINT32 Length, 82 ACPI_NAMESPACE_NODE *RegionNode) 83 { 84 ACPI_ADDRESS_RANGE *RangeInfo; 85 ACPI_STATUS Status; 86 87 88 ACPI_FUNCTION_TRACE (UtAddAddressRange); 89 90 91 if ((SpaceId != ACPI_ADR_SPACE_SYSTEM_MEMORY) && 92 (SpaceId != ACPI_ADR_SPACE_SYSTEM_IO)) 93 { 94 return_ACPI_STATUS (AE_OK); 95 } 96 97 /* Allocate/init a new info block, add it to the appropriate list */ 98 99 RangeInfo = ACPI_ALLOCATE (sizeof (ACPI_ADDRESS_RANGE)); 100 if (!RangeInfo) 101 { 102 return_ACPI_STATUS (AE_NO_MEMORY); 103 } 104 105 RangeInfo->StartAddress = Address; 106 RangeInfo->EndAddress = (Address + Length - 1); 107 RangeInfo->RegionNode = RegionNode; 108 109 Status = AcpiUtAcquireMutex (ACPI_MTX_NAMESPACE); 110 if (ACPI_FAILURE (Status)) 111 { 112 ACPI_FREE (RangeInfo); 113 return_ACPI_STATUS (Status); 114 } 115 116 RangeInfo->Next = AcpiGbl_AddressRangeList[SpaceId]; 117 AcpiGbl_AddressRangeList[SpaceId] = RangeInfo; 118 119 ACPI_DEBUG_PRINT ((ACPI_DB_NAMES, 120 "\nAdded [%4.4s] address range: 0x%8.8X%8.8X-0x%8.8X%8.8X\n", 121 AcpiUtGetNodeName (RangeInfo->RegionNode), 122 ACPI_FORMAT_UINT64 (Address), 123 ACPI_FORMAT_UINT64 (RangeInfo->EndAddress))); 124 125 (void) AcpiUtReleaseMutex (ACPI_MTX_NAMESPACE); 126 return_ACPI_STATUS (AE_OK); 127 } 128 129 130 /******************************************************************************* 131 * 132 * FUNCTION: AcpiUtRemoveAddressRange 133 * 134 * PARAMETERS: SpaceId - Address space ID 135 * RegionNode - OpRegion namespace node 136 * 137 * RETURN: None 138 * 139 * DESCRIPTION: Remove the Operation Region from the global list. The only 140 * supported Space IDs are Memory and I/O. Called when an 141 * OpRegion is deleted. 142 * 143 * MUTEX: Assumes the namespace is locked 144 * 145 ******************************************************************************/ 146 147 void 148 AcpiUtRemoveAddressRange ( 149 ACPI_ADR_SPACE_TYPE SpaceId, 150 ACPI_NAMESPACE_NODE *RegionNode) 151 { 152 ACPI_ADDRESS_RANGE *RangeInfo; 153 ACPI_ADDRESS_RANGE *Prev; 154 155 156 ACPI_FUNCTION_TRACE (UtRemoveAddressRange); 157 158 159 if ((SpaceId != ACPI_ADR_SPACE_SYSTEM_MEMORY) && 160 (SpaceId != ACPI_ADR_SPACE_SYSTEM_IO)) 161 { 162 return_VOID; 163 } 164 165 /* Get the appropriate list head and check the list */ 166 167 RangeInfo = Prev = AcpiGbl_AddressRangeList[SpaceId]; 168 while (RangeInfo) 169 { 170 if (RangeInfo->RegionNode == RegionNode) 171 { 172 if (RangeInfo == Prev) /* Found at list head */ 173 { 174 AcpiGbl_AddressRangeList[SpaceId] = RangeInfo->Next; 175 } 176 else 177 { 178 Prev->Next = RangeInfo->Next; 179 } 180 181 ACPI_DEBUG_PRINT ((ACPI_DB_NAMES, 182 "\nRemoved [%4.4s] address range: 0x%8.8X%8.8X-0x%8.8X%8.8X\n", 183 AcpiUtGetNodeName (RangeInfo->RegionNode), 184 ACPI_FORMAT_UINT64 (RangeInfo->StartAddress), 185 ACPI_FORMAT_UINT64 (RangeInfo->EndAddress))); 186 187 ACPI_FREE (RangeInfo); 188 return_VOID; 189 } 190 191 Prev = RangeInfo; 192 RangeInfo = RangeInfo->Next; 193 } 194 195 return_VOID; 196 } 197 198 199 /******************************************************************************* 200 * 201 * FUNCTION: AcpiUtCheckAddressRange 202 * 203 * PARAMETERS: SpaceId - Address space ID 204 * Address - Start address 205 * Length - Length of address range 206 * Warn - TRUE if warning on overlap desired 207 * 208 * RETURN: Count of the number of conflicts detected. Zero is always 209 * returned for Space IDs other than Memory or I/O. 210 * 211 * DESCRIPTION: Check if the input address range overlaps any of the 212 * ASL operation region address ranges. The only supported 213 * Space IDs are Memory and I/O. 214 * 215 * MUTEX: Assumes the namespace is locked. 216 * 217 ******************************************************************************/ 218 219 UINT32 220 AcpiUtCheckAddressRange ( 221 ACPI_ADR_SPACE_TYPE SpaceId, 222 ACPI_PHYSICAL_ADDRESS Address, 223 UINT32 Length, 224 BOOLEAN Warn) 225 { 226 ACPI_ADDRESS_RANGE *RangeInfo; 227 ACPI_PHYSICAL_ADDRESS EndAddress; 228 char *Pathname; 229 UINT32 OverlapCount = 0; 230 231 232 ACPI_FUNCTION_TRACE (UtCheckAddressRange); 233 234 235 if ((SpaceId != ACPI_ADR_SPACE_SYSTEM_MEMORY) && 236 (SpaceId != ACPI_ADR_SPACE_SYSTEM_IO)) 237 { 238 return_UINT32 (0); 239 } 240 241 RangeInfo = AcpiGbl_AddressRangeList[SpaceId]; 242 EndAddress = Address + Length - 1; 243 244 /* Check entire list for all possible conflicts */ 245 246 while (RangeInfo) 247 { 248 /* 249 * Check if the requested address/length overlaps this 250 * address range. There are four cases to consider: 251 * 252 * 1) Input address/length is contained completely in the 253 * address range 254 * 2) Input address/length overlaps range at the range start 255 * 3) Input address/length overlaps range at the range end 256 * 4) Input address/length completely encompasses the range 257 */ 258 if ((Address <= RangeInfo->EndAddress) && 259 (EndAddress >= RangeInfo->StartAddress)) 260 { 261 /* Found an address range overlap */ 262 263 OverlapCount++; 264 if (Warn) /* Optional warning message */ 265 { 266 Pathname = AcpiNsGetExternalPathname (RangeInfo->RegionNode); 267 268 ACPI_WARNING ((AE_INFO, 269 "%s range 0x%8.8X%8.8X-0x%8.8X%8.8X conflicts with OpRegion 0x%8.8X%8.8X-0x%8.8X%8.8X (%s)", 270 AcpiUtGetRegionName (SpaceId), 271 ACPI_FORMAT_UINT64 (Address), 272 ACPI_FORMAT_UINT64 (EndAddress), 273 ACPI_FORMAT_UINT64 (RangeInfo->StartAddress), 274 ACPI_FORMAT_UINT64 (RangeInfo->EndAddress), 275 Pathname)); 276 ACPI_FREE (Pathname); 277 } 278 } 279 280 RangeInfo = RangeInfo->Next; 281 } 282 283 return_UINT32 (OverlapCount); 284 } 285 286 287 /******************************************************************************* 288 * 289 * FUNCTION: AcpiUtDeleteAddressLists 290 * 291 * PARAMETERS: None 292 * 293 * RETURN: None 294 * 295 * DESCRIPTION: Delete all global address range lists (called during 296 * subsystem shutdown). 297 * 298 ******************************************************************************/ 299 300 void 301 AcpiUtDeleteAddressLists ( 302 void) 303 { 304 ACPI_ADDRESS_RANGE *Next; 305 ACPI_ADDRESS_RANGE *RangeInfo; 306 int i; 307 308 309 /* Delete all elements in all address range lists */ 310 311 for (i = 0; i < ACPI_ADDRESS_RANGE_MAX; i++) 312 { 313 Next = AcpiGbl_AddressRangeList[i]; 314 315 while (Next) 316 { 317 RangeInfo = Next; 318 Next = RangeInfo->Next; 319 ACPI_FREE (RangeInfo); 320 } 321 322 AcpiGbl_AddressRangeList[i] = NULL; 323 } 324 } 325