1 /****************************************************************************** 2 * 3 * Module Name: tbfadt - FADT table utilities 4 * 5 *****************************************************************************/ 6 7 /* 8 * Copyright (C) 2000 - 2015, Intel Corp. 9 * All rights reserved. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions, and the following disclaimer, 16 * without modification. 17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 18 * substantially similar to the "NO WARRANTY" disclaimer below 19 * ("Disclaimer") and any redistribution must be conditioned upon 20 * including a substantially similar Disclaimer requirement for further 21 * binary redistribution. 22 * 3. Neither the names of the above-listed copyright holders nor the names 23 * of any contributors may be used to endorse or promote products derived 24 * from this software without specific prior written permission. 25 * 26 * Alternatively, this software may be distributed under the terms of the 27 * GNU General Public License ("GPL") version 2 as published by the Free 28 * Software Foundation. 29 * 30 * NO WARRANTY 31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 41 * POSSIBILITY OF SUCH DAMAGES. 42 */ 43 44 #include <contrib/dev/acpica/include/acpi.h> 45 #include <contrib/dev/acpica/include/accommon.h> 46 #include <contrib/dev/acpica/include/actables.h> 47 48 #define _COMPONENT ACPI_TABLES 49 ACPI_MODULE_NAME ("tbfadt") 50 51 /* Local prototypes */ 52 53 static void 54 AcpiTbInitGenericAddress ( 55 ACPI_GENERIC_ADDRESS *GenericAddress, 56 UINT8 SpaceId, 57 UINT8 ByteWidth, 58 UINT64 Address, 59 char *RegisterName, 60 UINT8 Flags); 61 62 static void 63 AcpiTbConvertFadt ( 64 void); 65 66 static void 67 AcpiTbSetupFadtRegisters ( 68 void); 69 70 static UINT64 71 AcpiTbSelectAddress ( 72 char *RegisterName, 73 UINT32 Address32, 74 UINT64 Address64); 75 76 77 /* Table for conversion of FADT to common internal format and FADT validation */ 78 79 typedef struct acpi_fadt_info 80 { 81 char *Name; 82 UINT16 Address64; 83 UINT16 Address32; 84 UINT16 Length; 85 UINT8 DefaultLength; 86 UINT8 Flags; 87 88 } ACPI_FADT_INFO; 89 90 #define ACPI_FADT_OPTIONAL 0 91 #define ACPI_FADT_REQUIRED 1 92 #define ACPI_FADT_SEPARATE_LENGTH 2 93 #define ACPI_FADT_GPE_REGISTER 4 94 95 static ACPI_FADT_INFO FadtInfoTable[] = 96 { 97 {"Pm1aEventBlock", 98 ACPI_FADT_OFFSET (XPm1aEventBlock), 99 ACPI_FADT_OFFSET (Pm1aEventBlock), 100 ACPI_FADT_OFFSET (Pm1EventLength), 101 ACPI_PM1_REGISTER_WIDTH * 2, /* Enable + Status register */ 102 ACPI_FADT_REQUIRED}, 103 104 {"Pm1bEventBlock", 105 ACPI_FADT_OFFSET (XPm1bEventBlock), 106 ACPI_FADT_OFFSET (Pm1bEventBlock), 107 ACPI_FADT_OFFSET (Pm1EventLength), 108 ACPI_PM1_REGISTER_WIDTH * 2, /* Enable + Status register */ 109 ACPI_FADT_OPTIONAL}, 110 111 {"Pm1aControlBlock", 112 ACPI_FADT_OFFSET (XPm1aControlBlock), 113 ACPI_FADT_OFFSET (Pm1aControlBlock), 114 ACPI_FADT_OFFSET (Pm1ControlLength), 115 ACPI_PM1_REGISTER_WIDTH, 116 ACPI_FADT_REQUIRED}, 117 118 {"Pm1bControlBlock", 119 ACPI_FADT_OFFSET (XPm1bControlBlock), 120 ACPI_FADT_OFFSET (Pm1bControlBlock), 121 ACPI_FADT_OFFSET (Pm1ControlLength), 122 ACPI_PM1_REGISTER_WIDTH, 123 ACPI_FADT_OPTIONAL}, 124 125 {"Pm2ControlBlock", 126 ACPI_FADT_OFFSET (XPm2ControlBlock), 127 ACPI_FADT_OFFSET (Pm2ControlBlock), 128 ACPI_FADT_OFFSET (Pm2ControlLength), 129 ACPI_PM2_REGISTER_WIDTH, 130 ACPI_FADT_SEPARATE_LENGTH}, 131 132 {"PmTimerBlock", 133 ACPI_FADT_OFFSET (XPmTimerBlock), 134 ACPI_FADT_OFFSET (PmTimerBlock), 135 ACPI_FADT_OFFSET (PmTimerLength), 136 ACPI_PM_TIMER_WIDTH, 137 ACPI_FADT_SEPARATE_LENGTH}, /* ACPI 5.0A: Timer is optional */ 138 139 {"Gpe0Block", 140 ACPI_FADT_OFFSET (XGpe0Block), 141 ACPI_FADT_OFFSET (Gpe0Block), 142 ACPI_FADT_OFFSET (Gpe0BlockLength), 143 0, 144 ACPI_FADT_SEPARATE_LENGTH | ACPI_FADT_GPE_REGISTER}, 145 146 {"Gpe1Block", 147 ACPI_FADT_OFFSET (XGpe1Block), 148 ACPI_FADT_OFFSET (Gpe1Block), 149 ACPI_FADT_OFFSET (Gpe1BlockLength), 150 0, 151 ACPI_FADT_SEPARATE_LENGTH | ACPI_FADT_GPE_REGISTER} 152 }; 153 154 #define ACPI_FADT_INFO_ENTRIES \ 155 (sizeof (FadtInfoTable) / sizeof (ACPI_FADT_INFO)) 156 157 158 /* Table used to split Event Blocks into separate status/enable registers */ 159 160 typedef struct acpi_fadt_pm_info 161 { 162 ACPI_GENERIC_ADDRESS *Target; 163 UINT16 Source; 164 UINT8 RegisterNum; 165 166 } ACPI_FADT_PM_INFO; 167 168 static ACPI_FADT_PM_INFO FadtPmInfoTable[] = 169 { 170 {&AcpiGbl_XPm1aStatus, 171 ACPI_FADT_OFFSET (XPm1aEventBlock), 172 0}, 173 174 {&AcpiGbl_XPm1aEnable, 175 ACPI_FADT_OFFSET (XPm1aEventBlock), 176 1}, 177 178 {&AcpiGbl_XPm1bStatus, 179 ACPI_FADT_OFFSET (XPm1bEventBlock), 180 0}, 181 182 {&AcpiGbl_XPm1bEnable, 183 ACPI_FADT_OFFSET (XPm1bEventBlock), 184 1} 185 }; 186 187 #define ACPI_FADT_PM_INFO_ENTRIES \ 188 (sizeof (FadtPmInfoTable) / sizeof (ACPI_FADT_PM_INFO)) 189 190 191 /******************************************************************************* 192 * 193 * FUNCTION: AcpiTbInitGenericAddress 194 * 195 * PARAMETERS: GenericAddress - GAS struct to be initialized 196 * SpaceId - ACPI Space ID for this register 197 * ByteWidth - Width of this register 198 * Address - Address of the register 199 * RegisterName - ASCII name of the ACPI register 200 * 201 * RETURN: None 202 * 203 * DESCRIPTION: Initialize a Generic Address Structure (GAS) 204 * See the ACPI specification for a full description and 205 * definition of this structure. 206 * 207 ******************************************************************************/ 208 209 static void 210 AcpiTbInitGenericAddress ( 211 ACPI_GENERIC_ADDRESS *GenericAddress, 212 UINT8 SpaceId, 213 UINT8 ByteWidth, 214 UINT64 Address, 215 char *RegisterName, 216 UINT8 Flags) 217 { 218 UINT8 BitWidth; 219 220 221 /* 222 * Bit width field in the GAS is only one byte long, 255 max. 223 * Check for BitWidth overflow in GAS. 224 */ 225 BitWidth = (UINT8) (ByteWidth * 8); 226 if (ByteWidth > 31) /* (31*8)=248, (32*8)=256 */ 227 { 228 /* 229 * No error for GPE blocks, because we do not use the BitWidth 230 * for GPEs, the legacy length (ByteWidth) is used instead to 231 * allow for a large number of GPEs. 232 */ 233 if (!(Flags & ACPI_FADT_GPE_REGISTER)) 234 { 235 ACPI_ERROR ((AE_INFO, 236 "%s - 32-bit FADT register is too long (%u bytes, %u bits) " 237 "to convert to GAS struct - 255 bits max, truncating", 238 RegisterName, ByteWidth, (ByteWidth * 8))); 239 } 240 241 BitWidth = 255; 242 } 243 244 /* 245 * The 64-bit Address field is non-aligned in the byte packed 246 * GAS struct. 247 */ 248 ACPI_MOVE_64_TO_64 (&GenericAddress->Address, &Address); 249 250 /* All other fields are byte-wide */ 251 252 GenericAddress->SpaceId = SpaceId; 253 GenericAddress->BitWidth = BitWidth; 254 GenericAddress->BitOffset = 0; 255 GenericAddress->AccessWidth = 0; /* Access width ANY */ 256 } 257 258 259 /******************************************************************************* 260 * 261 * FUNCTION: AcpiTbSelectAddress 262 * 263 * PARAMETERS: RegisterName - ASCII name of the ACPI register 264 * Address32 - 32-bit address of the register 265 * Address64 - 64-bit address of the register 266 * 267 * RETURN: The resolved 64-bit address 268 * 269 * DESCRIPTION: Select between 32-bit and 64-bit versions of addresses within 270 * the FADT. Used for the FACS and DSDT addresses. 271 * 272 * NOTES: 273 * 274 * Check for FACS and DSDT address mismatches. An address mismatch between 275 * the 32-bit and 64-bit address fields (FIRMWARE_CTRL/X_FIRMWARE_CTRL and 276 * DSDT/X_DSDT) could be a corrupted address field or it might indicate 277 * the presence of two FACS or two DSDT tables. 278 * 279 * November 2013: 280 * By default, as per the ACPICA specification, a valid 64-bit address is 281 * used regardless of the value of the 32-bit address. However, this 282 * behavior can be overridden via the AcpiGbl_Use32BitFadtAddresses flag. 283 * 284 ******************************************************************************/ 285 286 static UINT64 287 AcpiTbSelectAddress ( 288 char *RegisterName, 289 UINT32 Address32, 290 UINT64 Address64) 291 { 292 293 if (!Address64) 294 { 295 /* 64-bit address is zero, use 32-bit address */ 296 297 return ((UINT64) Address32); 298 } 299 300 if (Address32 && 301 (Address64 != (UINT64) Address32)) 302 { 303 /* Address mismatch between 32-bit and 64-bit versions */ 304 305 ACPI_BIOS_WARNING ((AE_INFO, 306 "32/64X %s address mismatch in FADT: " 307 "0x%8.8X/0x%8.8X%8.8X, using %u-bit address", 308 RegisterName, Address32, ACPI_FORMAT_UINT64 (Address64), 309 AcpiGbl_Use32BitFadtAddresses ? 32 : 64)); 310 311 /* 32-bit address override */ 312 313 if (AcpiGbl_Use32BitFadtAddresses) 314 { 315 return ((UINT64) Address32); 316 } 317 } 318 319 /* Default is to use the 64-bit address */ 320 321 return (Address64); 322 } 323 324 325 /******************************************************************************* 326 * 327 * FUNCTION: AcpiTbParseFadt 328 * 329 * PARAMETERS: TableIndex - Index for the FADT 330 * 331 * RETURN: None 332 * 333 * DESCRIPTION: Initialize the FADT, DSDT and FACS tables 334 * (FADT contains the addresses of the DSDT and FACS) 335 * 336 ******************************************************************************/ 337 338 void 339 AcpiTbParseFadt ( 340 UINT32 TableIndex) 341 { 342 UINT32 Length; 343 ACPI_TABLE_HEADER *Table; 344 345 346 /* 347 * The FADT has multiple versions with different lengths, 348 * and it contains pointers to both the DSDT and FACS tables. 349 * 350 * Get a local copy of the FADT and convert it to a common format 351 * Map entire FADT, assumed to be smaller than one page. 352 */ 353 Length = AcpiGbl_RootTableList.Tables[TableIndex].Length; 354 355 Table = AcpiOsMapMemory ( 356 AcpiGbl_RootTableList.Tables[TableIndex].Address, Length); 357 if (!Table) 358 { 359 return; 360 } 361 362 /* 363 * Validate the FADT checksum before we copy the table. Ignore 364 * checksum error as we want to try to get the DSDT and FACS. 365 */ 366 (void) AcpiTbVerifyChecksum (Table, Length); 367 368 /* Create a local copy of the FADT in common ACPI 2.0+ format */ 369 370 AcpiTbCreateLocalFadt (Table, Length); 371 372 /* All done with the real FADT, unmap it */ 373 374 AcpiOsUnmapMemory (Table, Length); 375 376 /* Obtain the DSDT and FACS tables via their addresses within the FADT */ 377 378 AcpiTbInstallFixedTable ((ACPI_PHYSICAL_ADDRESS) AcpiGbl_FADT.XDsdt, 379 ACPI_SIG_DSDT, &AcpiGbl_DsdtIndex); 380 381 /* If Hardware Reduced flag is set, there is no FACS */ 382 383 if (!AcpiGbl_ReducedHardware) 384 { 385 if (AcpiGbl_FADT.Facs) 386 { 387 AcpiTbInstallFixedTable ((ACPI_PHYSICAL_ADDRESS) AcpiGbl_FADT.Facs, 388 ACPI_SIG_FACS, &AcpiGbl_FacsIndex); 389 } 390 if (AcpiGbl_FADT.XFacs) 391 { 392 AcpiTbInstallFixedTable ((ACPI_PHYSICAL_ADDRESS) AcpiGbl_FADT.XFacs, 393 ACPI_SIG_FACS, &AcpiGbl_XFacsIndex); 394 } 395 } 396 } 397 398 399 /******************************************************************************* 400 * 401 * FUNCTION: AcpiTbCreateLocalFadt 402 * 403 * PARAMETERS: Table - Pointer to BIOS FADT 404 * Length - Length of the table 405 * 406 * RETURN: None 407 * 408 * DESCRIPTION: Get a local copy of the FADT and convert it to a common format. 409 * Performs validation on some important FADT fields. 410 * 411 * NOTE: We create a local copy of the FADT regardless of the version. 412 * 413 ******************************************************************************/ 414 415 void 416 AcpiTbCreateLocalFadt ( 417 ACPI_TABLE_HEADER *Table, 418 UINT32 Length) 419 { 420 421 /* 422 * Check if the FADT is larger than the largest table that we expect 423 * (the ACPI 5.0 version). If so, truncate the table, and issue 424 * a warning. 425 */ 426 if (Length > sizeof (ACPI_TABLE_FADT)) 427 { 428 ACPI_BIOS_WARNING ((AE_INFO, 429 "FADT (revision %u) is longer than ACPI 5.0 version, " 430 "truncating length %u to %u", 431 Table->Revision, Length, (UINT32) sizeof (ACPI_TABLE_FADT))); 432 } 433 434 /* Clear the entire local FADT */ 435 436 memset (&AcpiGbl_FADT, 0, sizeof (ACPI_TABLE_FADT)); 437 438 /* Copy the original FADT, up to sizeof (ACPI_TABLE_FADT) */ 439 440 memcpy (&AcpiGbl_FADT, Table, 441 ACPI_MIN (Length, sizeof (ACPI_TABLE_FADT))); 442 443 /* Take a copy of the Hardware Reduced flag */ 444 445 AcpiGbl_ReducedHardware = FALSE; 446 if (AcpiGbl_FADT.Flags & ACPI_FADT_HW_REDUCED) 447 { 448 AcpiGbl_ReducedHardware = TRUE; 449 } 450 451 /* Convert the local copy of the FADT to the common internal format */ 452 453 AcpiTbConvertFadt (); 454 455 /* Initialize the global ACPI register structures */ 456 457 AcpiTbSetupFadtRegisters (); 458 } 459 460 461 /******************************************************************************* 462 * 463 * FUNCTION: AcpiTbConvertFadt 464 * 465 * PARAMETERS: None - AcpiGbl_FADT is used. 466 * 467 * RETURN: None 468 * 469 * DESCRIPTION: Converts all versions of the FADT to a common internal format. 470 * Expand 32-bit addresses to 64-bit as necessary. Also validate 471 * important fields within the FADT. 472 * 473 * NOTE: AcpiGbl_FADT must be of size (ACPI_TABLE_FADT), and must 474 * contain a copy of the actual BIOS-provided FADT. 475 * 476 * Notes on 64-bit register addresses: 477 * 478 * After this FADT conversion, later ACPICA code will only use the 64-bit "X" 479 * fields of the FADT for all ACPI register addresses. 480 * 481 * The 64-bit X fields are optional extensions to the original 32-bit FADT 482 * V1.0 fields. Even if they are present in the FADT, they are optional and 483 * are unused if the BIOS sets them to zero. Therefore, we must copy/expand 484 * 32-bit V1.0 fields to the 64-bit X fields if the the 64-bit X field is 485 * originally zero. 486 * 487 * For ACPI 1.0 FADTs (that contain no 64-bit addresses), all 32-bit address 488 * fields are expanded to the corresponding 64-bit X fields in the internal 489 * common FADT. 490 * 491 * For ACPI 2.0+ FADTs, all valid (non-zero) 32-bit address fields are expanded 492 * to the corresponding 64-bit X fields, if the 64-bit field is originally 493 * zero. Adhering to the ACPI specification, we completely ignore the 32-bit 494 * field if the 64-bit field is valid, regardless of whether the host OS is 495 * 32-bit or 64-bit. 496 * 497 * Possible additional checks: 498 * (AcpiGbl_FADT.Pm1EventLength >= 4) 499 * (AcpiGbl_FADT.Pm1ControlLength >= 2) 500 * (AcpiGbl_FADT.PmTimerLength >= 4) 501 * Gpe block lengths must be multiple of 2 502 * 503 ******************************************************************************/ 504 505 static void 506 AcpiTbConvertFadt ( 507 void) 508 { 509 char *Name; 510 ACPI_GENERIC_ADDRESS *Address64; 511 UINT32 Address32; 512 UINT8 Length; 513 UINT8 Flags; 514 UINT32 i; 515 516 517 /* 518 * For ACPI 1.0 FADTs (revision 1 or 2), ensure that reserved fields which 519 * should be zero are indeed zero. This will workaround BIOSs that 520 * inadvertently place values in these fields. 521 * 522 * The ACPI 1.0 reserved fields that will be zeroed are the bytes located 523 * at offset 45, 55, 95, and the word located at offset 109, 110. 524 * 525 * Note: The FADT revision value is unreliable. Only the length can be 526 * trusted. 527 */ 528 if (AcpiGbl_FADT.Header.Length <= ACPI_FADT_V2_SIZE) 529 { 530 AcpiGbl_FADT.PreferredProfile = 0; 531 AcpiGbl_FADT.PstateControl = 0; 532 AcpiGbl_FADT.CstControl = 0; 533 AcpiGbl_FADT.BootFlags = 0; 534 } 535 536 /* 537 * Now we can update the local FADT length to the length of the 538 * current FADT version as defined by the ACPI specification. 539 * Thus, we will have a common FADT internally. 540 */ 541 AcpiGbl_FADT.Header.Length = sizeof (ACPI_TABLE_FADT); 542 543 /* 544 * Expand the 32-bit DSDT addresses to 64-bit as necessary. 545 * Later ACPICA code will always use the X 64-bit field. 546 */ 547 AcpiGbl_FADT.XDsdt = AcpiTbSelectAddress ("DSDT", 548 AcpiGbl_FADT.Dsdt, AcpiGbl_FADT.XDsdt); 549 550 /* If Hardware Reduced flag is set, we are all done */ 551 552 if (AcpiGbl_ReducedHardware) 553 { 554 return; 555 } 556 557 /* Examine all of the 64-bit extended address fields (X fields) */ 558 559 for (i = 0; i < ACPI_FADT_INFO_ENTRIES; i++) 560 { 561 /* 562 * Get the 32-bit and 64-bit addresses, as well as the register 563 * length and register name. 564 */ 565 Address32 = *ACPI_ADD_PTR (UINT32, 566 &AcpiGbl_FADT, FadtInfoTable[i].Address32); 567 568 Address64 = ACPI_ADD_PTR (ACPI_GENERIC_ADDRESS, 569 &AcpiGbl_FADT, FadtInfoTable[i].Address64); 570 571 Length = *ACPI_ADD_PTR (UINT8, 572 &AcpiGbl_FADT, FadtInfoTable[i].Length); 573 574 Name = FadtInfoTable[i].Name; 575 Flags = FadtInfoTable[i].Flags; 576 577 /* 578 * Expand the ACPI 1.0 32-bit addresses to the ACPI 2.0 64-bit "X" 579 * generic address structures as necessary. Later code will always use 580 * the 64-bit address structures. 581 * 582 * November 2013: 583 * Now always use the 64-bit address if it is valid (non-zero), in 584 * accordance with the ACPI specification which states that a 64-bit 585 * address supersedes the 32-bit version. This behavior can be 586 * overridden by the AcpiGbl_Use32BitFadtAddresses flag. 587 * 588 * During 64-bit address construction and verification, 589 * these cases are handled: 590 * 591 * Address32 zero, Address64 [don't care] - Use Address64 592 * 593 * Address32 non-zero, Address64 zero - Copy/use Address32 594 * Address32 non-zero == Address64 non-zero - Use Address64 595 * Address32 non-zero != Address64 non-zero - Warning, use Address64 596 * 597 * Override: if AcpiGbl_Use32BitFadtAddresses is TRUE, and: 598 * Address32 non-zero != Address64 non-zero - Warning, copy/use Address32 599 * 600 * Note: SpaceId is always I/O for 32-bit legacy address fields 601 */ 602 if (Address32) 603 { 604 if (!Address64->Address) 605 { 606 /* 64-bit address is zero, use 32-bit address */ 607 608 AcpiTbInitGenericAddress (Address64, 609 ACPI_ADR_SPACE_SYSTEM_IO, 610 *ACPI_ADD_PTR (UINT8, &AcpiGbl_FADT, 611 FadtInfoTable[i].Length), 612 (UINT64) Address32, Name, Flags); 613 } 614 else if (Address64->Address != (UINT64) Address32) 615 { 616 /* Address mismatch */ 617 618 ACPI_BIOS_WARNING ((AE_INFO, 619 "32/64X address mismatch in FADT/%s: " 620 "0x%8.8X/0x%8.8X%8.8X, using %u-bit address", 621 Name, Address32, 622 ACPI_FORMAT_UINT64 (Address64->Address), 623 AcpiGbl_Use32BitFadtAddresses ? 32 : 64)); 624 625 if (AcpiGbl_Use32BitFadtAddresses) 626 { 627 /* 32-bit address override */ 628 629 AcpiTbInitGenericAddress (Address64, 630 ACPI_ADR_SPACE_SYSTEM_IO, 631 *ACPI_ADD_PTR (UINT8, &AcpiGbl_FADT, 632 FadtInfoTable[i].Length), 633 (UINT64) Address32, Name, Flags); 634 } 635 } 636 } 637 638 /* 639 * For each extended field, check for length mismatch between the 640 * legacy length field and the corresponding 64-bit X length field. 641 * Note: If the legacy length field is > 0xFF bits, ignore this 642 * check. (GPE registers can be larger than the 64-bit GAS structure 643 * can accomodate, 0xFF bits). 644 */ 645 if (Address64->Address && 646 (ACPI_MUL_8 (Length) <= ACPI_UINT8_MAX) && 647 (Address64->BitWidth != ACPI_MUL_8 (Length))) 648 { 649 ACPI_BIOS_WARNING ((AE_INFO, 650 "32/64X length mismatch in FADT/%s: %u/%u", 651 Name, ACPI_MUL_8 (Length), Address64->BitWidth)); 652 } 653 654 if (FadtInfoTable[i].Flags & ACPI_FADT_REQUIRED) 655 { 656 /* 657 * Field is required (PM1aEvent, PM1aControl). 658 * Both the address and length must be non-zero. 659 */ 660 if (!Address64->Address || !Length) 661 { 662 ACPI_BIOS_ERROR ((AE_INFO, 663 "Required FADT field %s has zero address and/or length: " 664 "0x%8.8X%8.8X/0x%X", 665 Name, ACPI_FORMAT_UINT64 (Address64->Address), Length)); 666 } 667 } 668 else if (FadtInfoTable[i].Flags & ACPI_FADT_SEPARATE_LENGTH) 669 { 670 /* 671 * Field is optional (PM2Control, GPE0, GPE1) AND has its own 672 * length field. If present, both the address and length must 673 * be valid. 674 */ 675 if ((Address64->Address && !Length) || 676 (!Address64->Address && Length)) 677 { 678 ACPI_BIOS_WARNING ((AE_INFO, 679 "Optional FADT field %s has zero address or length: " 680 "0x%8.8X%8.8X/0x%X", 681 Name, ACPI_FORMAT_UINT64 (Address64->Address), Length)); 682 } 683 } 684 } 685 } 686 687 688 /******************************************************************************* 689 * 690 * FUNCTION: AcpiTbSetupFadtRegisters 691 * 692 * PARAMETERS: None, uses AcpiGbl_FADT. 693 * 694 * RETURN: None 695 * 696 * DESCRIPTION: Initialize global ACPI PM1 register definitions. Optionally, 697 * force FADT register definitions to their default lengths. 698 * 699 ******************************************************************************/ 700 701 static void 702 AcpiTbSetupFadtRegisters ( 703 void) 704 { 705 ACPI_GENERIC_ADDRESS *Target64; 706 ACPI_GENERIC_ADDRESS *Source64; 707 UINT8 Pm1RegisterByteWidth; 708 UINT32 i; 709 710 711 /* 712 * Optionally check all register lengths against the default values and 713 * update them if they are incorrect. 714 */ 715 if (AcpiGbl_UseDefaultRegisterWidths) 716 { 717 for (i = 0; i < ACPI_FADT_INFO_ENTRIES; i++) 718 { 719 Target64 = ACPI_ADD_PTR (ACPI_GENERIC_ADDRESS, &AcpiGbl_FADT, 720 FadtInfoTable[i].Address64); 721 722 /* 723 * If a valid register (Address != 0) and the (DefaultLength > 0) 724 * (Not a GPE register), then check the width against the default. 725 */ 726 if ((Target64->Address) && 727 (FadtInfoTable[i].DefaultLength > 0) && 728 (FadtInfoTable[i].DefaultLength != Target64->BitWidth)) 729 { 730 ACPI_BIOS_WARNING ((AE_INFO, 731 "Invalid length for FADT/%s: %u, using default %u", 732 FadtInfoTable[i].Name, Target64->BitWidth, 733 FadtInfoTable[i].DefaultLength)); 734 735 /* Incorrect size, set width to the default */ 736 737 Target64->BitWidth = FadtInfoTable[i].DefaultLength; 738 } 739 } 740 } 741 742 /* 743 * Get the length of the individual PM1 registers (enable and status). 744 * Each register is defined to be (event block length / 2). Extra divide 745 * by 8 converts bits to bytes. 746 */ 747 Pm1RegisterByteWidth = (UINT8) 748 ACPI_DIV_16 (AcpiGbl_FADT.XPm1aEventBlock.BitWidth); 749 750 /* 751 * Calculate separate GAS structs for the PM1x (A/B) Status and Enable 752 * registers. These addresses do not appear (directly) in the FADT, so it 753 * is useful to pre-calculate them from the PM1 Event Block definitions. 754 * 755 * The PM event blocks are split into two register blocks, first is the 756 * PM Status Register block, followed immediately by the PM Enable 757 * Register block. Each is of length (Pm1EventLength/2) 758 * 759 * Note: The PM1A event block is required by the ACPI specification. 760 * However, the PM1B event block is optional and is rarely, if ever, 761 * used. 762 */ 763 764 for (i = 0; i < ACPI_FADT_PM_INFO_ENTRIES; i++) 765 { 766 Source64 = ACPI_ADD_PTR (ACPI_GENERIC_ADDRESS, &AcpiGbl_FADT, 767 FadtPmInfoTable[i].Source); 768 769 if (Source64->Address) 770 { 771 AcpiTbInitGenericAddress (FadtPmInfoTable[i].Target, 772 Source64->SpaceId, Pm1RegisterByteWidth, 773 Source64->Address + 774 (FadtPmInfoTable[i].RegisterNum * Pm1RegisterByteWidth), 775 "PmRegisters", 0); 776 } 777 } 778 } 779